Huawei+atn+910da+datasheet+exclusive Link

Huawei ATN 910D-A is a compact, high-capacity 1U fixed-port router designed primarily for 5G base station access and VIP private line services

. It features an 800Gbps system capacity and supports advanced 5G-ready features such as SRv6, FlexE slicing, and high-precision clock synchronization. Key Technical Specifications System Capacity 800Gbps switching capacity Interface Density 4 x 100GE/50GE + 16 x 25GE/10GE/GE + 8 x 10GE/GE/FE Dimensions (HxWxD) 44.45mm (1U) x 442mm x 220mm Approximately 4kg Power Input Dual DC/AC, 1+1 backup redundancy Power Consumption Typical: 180W Operating Temp -40°C to +65°C, supporting outdoor cabinet deployment Exclusive & Advanced Features 5G Ready Architecture : Supports

(Segment Routing over IPv6) and EVPN for simplified network evolution and automated service deployment. Network Slicing : Utilizes

(Flexible Ethernet) technology to provide hard-pipe isolation for different services, ensuring zero interference between slices. Intelligent O&M : Integrated with

(In-situ Flow Information Telemetry) for real-time, millisecond-level service quality monitoring and fault location. High Precision Sync : Supports

and G.8275.1/G.8275.2 protocols for ultra-precise clock synchronization required by 5G networks. Carrier-Grade Reliability

: Features less than 50ms protection switching and supports technologies like

(Topology-Independent Loop-free Alternate) for rapid failover. Deployment Scenarios 5G Transport

: Ideal for base station access due to its high-density 100GE/50GE ports and compact 220mm depth, allowing it to share cabinets with wireless Baseband Units (BBU). Enterprise Private Lines

: Provides multi-service access for VIP customers using L2VPN, L3VPN, and HQoS for guaranteed service levels.

For further technical documentation and manuals, you can visit the Huawei ATN 910D Support Guide Enterprise Product DataSheet ATN 910D-A Brochure v2.0 | PDF - Scribd

The Huawei NetEngine ATN 910D-A is a compact, high-performance multi-service access router designed specifically for 5G mobile backhaul and VIP private line services. Part of the ATN 910D series, it enables carriers to transition from traditional MPLS to advanced SRv6 architectures with massive throughput in a 1U form factor. ⚡ Key Technical Specifications ATN 910D-A

is engineered for high-density environments, offering line-rate throughput across a variety of port types. Form Factor: 1U fixed chassis, 220mm depth.

Switching Capacity: Up to 880Gbps (bidirectional) for the series.

Interface Support: High-density 100GE, 50GE, 25GE, 10GE, and GE/FE ports.

Uplink Access: Supports 50GE and 100GE uplinks to meet evolving traffic demands.

Forwarding Performance: Optimized for 256-byte packets and larger with zero-loss recovery.

Reliability: 1+1 redundancy for power supplies (AC/DC) and advanced heat dissipation design. 🚀 Advanced Network Features

This router serves as a critical bridge for network evolution, supporting modern protocols that simplify operations and enhance service quality.

SRv6 & EVPN: Simplifies tunnel technology and automates MAC learning to reduce deployment costs.

5G Network Slicing: Uses FlexAlgo and FlexE (Flexible Ethernet) to provide hardware-isolated network slices for different service types.

Precision Timing: Supports 1588v2 high-precision clocks and G.8275.1, essential for 5G synchronization.

SRv6 Compression: Implements header compression to improve bandwidth efficiency during MPLS-to-SRv6 migrations. 🛠️ Deployment & Maintenance ATN 910D-A

is built for industrial-grade reliability, capable of operating in wide temperature ranges from -40°C to +65°C.

Plug-and-Play: Supports zero-site commissioning and remote maintenance via Huawei's Support Portal.

Intelligent O&M: Real-time performance detection using TWAMP and IPFPM allows for rapid fault location without affecting live traffic.

Fast Failover: Features TI-LFA with failover times under 1.4 ms, ensuring continuous service during link failures. If you'd like more details, I can help you find: Specific ordering codes or part numbers for the ATN 910D-A

A comparison between the 910D-A and the 910C or 910D-B models. Installation guides for outdoor cabinet deployments. ATN910C - Huawei Carrier

The Huawei ATN 910D-A (often searched with the variations like 910DA) is a high-performance, 1U fixed-box router designed specifically for 5G mobile backhaul and multi-service aggregation. Positioned at the access and aggregation layers, it provides the "last mile" connectivity for base station transport and high-end VIP private lines. Exclusive Technical Specifications

The ATN 910D-A stands out in the ATN 910 Series for its massive switching capacity and high-density port configuration within a compact 1U form factor. Switching Capacity: 800 Gbps (bi-directional). Port Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports. Dimensions: 442 mm × 220 mm × 44.45 mm (1U height). Weight: Approximately 4 kg. Power Consumption: 180W typical.

Operating Temperature: –40ºC to +65ºC, making it suitable for outdoor cabinet deployments.

Power Redundancy: Supports dual DC/AC inputs with 1+1 backup. Core 5G-Ready Features

The router is built on a programmable NP architecture, ensuring it can adapt to future network requirements without hardware overhauls.

Network Slicing (FlexE): Supports Flexible Ethernet (FlexE) to divide a single physical port into multiple logical slices. This ensures strict bandwidth isolation for different services, such as mission-critical industrial data vs. general consumer traffic.

Advanced Protocols: Fully supports SRv6 (Segment Routing over IPv6) and EVPN (Ethernet VPN), which simplify network protocols and enable automated service provisioning.

High-Precision Synchronization: Essential for 5G networks, it supports 1588v2, G.8275.1 (full-mode OC, TC, BC), and Synchronous Ethernet clocking.

Intelligent O&M (iFIT): Uses In-situ Flow Information Telemetry (iFIT) for millisecond-level in-band flow detection. This allows operators to visualize service quality and demarcate faults within minutes. Reliability and Deployment

The ATN 910D-A is engineered for carrier-grade reliability with millisecond-level fault detection.

Fast Protection Switching: Supports IP FRR, LDP FRR, and TI-LFA (Topology-Independent Loop-Free Alternate) to ensure protection switching under 50ms.

Environmental Hardening: Its wide temperature range and industrial-grade components allow it to be co-deployed with base stations in harsh environments.

Plug-and-Play: Supports automated rollout through iMaster NCE, significantly reducing the time required for large-scale site deployments. Market Positioning and Cost

As a part of the Huawei ATN Series, the 910D-A helps carriers lower the Total Cost of Ownership (TCO) by unifying 2G, 3G, 4G, and 5G transport on a single platform. Pricing for these units typically ranges from $13,000 to $15,000 for basic configurations, though specialized high-anti-corrosion or high-capacity models can exceed $35,000 depending on the region and license packages. ATN910B - Huawei Carrier

The Huawei ATN 910D-A is a compact, high-capacity 1U case-shaped router designed primarily for 5G base station access and VIP private line services. It is part of Huawei's NetEngine series focused on intelligent IP networks and FMC (Fixed-Mobile Convergence). Technical Specifications Specification Switching Capacity Interface Density 4 x 100GE/50GE + 16 x 25GE/10GE/GE + 8 x 10GE/GE/FE Dimensions (WxDxH) 442 mm x 220 mm x 44.45 mm (1U) Weight Typical Power Consumption Power Supply DC/AC, 1+1 redundancy Operating Temperature -40°C to +65°C (supports outdoor deployment) Key Features huawei+atn+910da+datasheet+exclusive

High Performance: Designed with 800G capacity to support the high bandwidth requirements of 5G networks.

Protocols & Technologies: Supports advanced networking features including SRv6 (Segment Routing over IPv6), EVPN, FlexE slicing, and high-precision clock synchronization (1588v2, G.8275.1).

Compact Design: At only 220mm depth, it is compatible with 300mm deep cabinets, making it suitable for space-constrained edge locations.

Reliability: Features industrial-level design with redundant power and fan systems. Resources & Support

Official Documentation: You can find detailed manuals, installation guides, and software updates on the Huawei Enterprise Support page for ATN 910D-A .

Product Brochure: A comprehensive ATN 910D-A Brochure (PDF) is available on platforms like Scribd. ATN 910D-A Brochure v2.0 - Scribd

The Huawei ATN 910D-A is a compact, high-capacity 1U case-shaped service router designed primarily for mobile base station access (2G/3G/4G/5G) and VIP private line services in enterprise and ISP environments. It is positioned as a 5G-ready access-layer device featuring high density and carrier-grade reliability.  Key Technical Specifications 

According to the official ATN 910D-A Brochure, the primary hardware specs are:  System Capacity: 800 Gbps switching capacity. Form Factor: 1U height (442mm x 220mm x 44.45mm). Weight: Approximately 4 kg. Typical Power Consumption: 180W.

Operating Temperature: Supports wide range from -40°C to +65°C, making it suitable for outdoor cabinet deployments. Power Supply: Dual DC/AC 1+1 backup for high reliability.  Interface Density 

The device provides a high-density port configuration to support varied bandwidth requirements:  4 x 100GE / 50GE ports 16 x 25GE / 10GE / GE ports 8 x 10GE / GE / FE ports  Exclusive Software & Protocol Support 

The ATN 910D-A leverages advanced networking protocols to facilitate 5G and industrial applications: 

Protocols: Supports SRv6 (Segment Routing over IPv6), EVPN (Ethernet VPN), and SRv6 Policy for intelligent traffic engineering.

Network Slicing: Capabilities based on FlexE (Flexible Ethernet) deployment to isolate services.

Synchronization: High-precision clock synchronization including 1588v2, Synchronous Ethernet, and G.8275.1/G.8275.2.

OAM & Monitoring: Built-in iFIT (In-situ Flow Information Telemetry), NQA, and TWAMP for real-time network performance monitoring.

L2/L3 Features: Full support for MPLS LDP, RSVP-TE, VPLS, and L3VPN.  Maintenance and Management 

Huawei provides centralized support for the ATN series through the Huawei Enterprise Support Portal, offering manuals, software updates, and troubleshooting guides. For larger deployments, it integrates with the CX600/NE40E series using a unified software platform for streamlined operations.  ATN Series - Huawei Carrier

Huawei ATN 910DA Datasheet: Exclusive Insights and Specifications

The Huawei ATN 910DA is a cutting-edge, high-performance access node designed to meet the evolving needs of modern telecommunications networks. As a leading player in the networking and telecommunications industry, Huawei continues to innovate and push the boundaries of what is possible with its latest offerings. In this article, we will delve into the exclusive datasheet of the Huawei ATN 910DA, exploring its key features, specifications, and benefits.

Introduction to Huawei ATN 910DA

The Huawei ATN 910DA is a versatile access node that supports a wide range of interfaces and applications, making it an ideal solution for various network deployment scenarios. This node is designed to provide high-speed, reliable, and secure connectivity for a large number of users, supporting a broad range of services, including broadband access, voice, and data.

Key Features and Benefits

The Huawei ATN 910DA datasheet reveals a comprehensive set of features and benefits that make it an attractive solution for network operators and service providers. Some of the key features include:

• High-performance hardware platform: The ATN 910DA is powered by a high-performance processor and equipped with ample memory and storage, ensuring smooth and efficient operation even under heavy loads.
• Multi-interface support: The node supports a wide range of interfaces, including Gigabit Ethernet, 10 Gigabit Ethernet, and EPON, allowing for flexible network design and easy integration with existing infrastructure.
• Advanced Quality of Service (QoS): The ATN 910DA features advanced QoS capabilities, ensuring that critical applications and services receive priority treatment and optimal network performance.
• Robust security features: The node includes robust security features, such as firewall, VPN, and access control, to protect against unauthorized access and malicious activities.

Technical Specifications

The Huawei ATN 910DA datasheet provides detailed technical specifications, which are summarized below:

• Hardware Specifications:
  • Processor: High-performance processor with 64-bit architecture
  • Memory: Up to 16 GB of RAM and 256 GB of storage
  • Interfaces: 8 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, 1 x EPON
• Software Specifications:
  • Operating System: Huawei's proprietary VRP (Versatile Routing Platform)
  • Supported protocols: OSPF, IS-IS, BGP, MPLS, and more
  • QoS features: Advanced QoS, traffic shaping, and policing

Exclusive Insights

The Huawei ATN 910DA datasheet also reveals some exclusive insights into the node's capabilities and design. For instance:

• Scalability and flexibility: The ATN 910DA is designed to be highly scalable and flexible, allowing network operators to easily upgrade and expand their networks as needed.
• Energy efficiency: The node features energy-efficient design and components, reducing power consumption and minimizing environmental impact.
• Integration with Huawei ecosystem: The ATN 910DA is fully integrated with Huawei's broader ecosystem, including its network management system, assurance platform, and security solutions.

Market and Competitive Landscape

The access node market is highly competitive, with several major players vying for market share. However, the Huawei ATN 910DA datasheet demonstrates that Huawei remains a leader in the industry, with a strong focus on innovation, performance, and customer needs.

Conclusion

The Huawei ATN 910DA datasheet provides a comprehensive overview of this powerful access node, highlighting its key features, specifications, and benefits. With its high-performance hardware platform, advanced QoS capabilities, and robust security features, the ATN 910DA is an attractive solution for network operators and service providers seeking to upgrade their networks and deliver high-quality services to their customers. As the telecommunications industry continues to evolve, Huawei's ATN 910DA is well-positioned to play a critical role in shaping the future of networking and communication.

Overview

The Huawei ATN 910DA is a compact, high-performance access terminal designed for secure LTE/5G-based fixed wireless access and industrial IoT backhaul applications. It combines carrier-grade radio, robust routing functions, and flexible I/O in a small, weather-resistant enclosure suitable for rooftop or pole mounting.

Part 7: Ordering & Compatibility (SKU Decoder)

To procure the exclusive ATN 910DA correctly, avoid confusion with the base 910D. Use these part numbers:

• Base Chassis: ATN910DA (No PSU included).
• Power Supply Units:
  • PSU-45W-DC (Standard -48V)
  • PSU-45W-24DC (+24V for utility substations)
• Accessories:
  • CR-MPB-E-8E1 (Spare E1 protection module)
  • CKIT-910DA (Rack-mount kit for 19" cabinets)

Exclusive Warning: The 910DA does not accept the AC power module of the 910C. Attempting to insert it will short the backplane. Always verify PSU voltage before insertion.

3. Switching Capacity

This is where the "DA" series distinguishes itself from standard access nodes.

• Switching Architecture: Full cross-connect switching.
• Packet Switching Capacity: Up to 120 Gbit/s (bidirectional).
• **TDM Switching Capacity

Huawei ATN 910D-A is a compact, 1U case-shaped router designed for the high-performance demands of 5G-oriented base station access and VIP private line services. Positioning itself as a cornerstone for mobile bearer networks, it bridges the gap between traditional LTE and modern 5G architectures by offering high density, large capacity, and advanced network slicing capabilities. Core Technical Specifications ATN 910D-A

is built to provide high-speed uplinks and versatile service interfaces within a small physical footprint: Switching Capacity: Supports a robust Dimensions: A compact 1U height, measuring 442 mm x 220 mm x 44.45 mm Port Density:

Features a mix of high-speed interfaces, typically including: 4 x 100GE/50GE 16 x 25GE/10GE/GE 8 x 10GE/GE/FE Environment Resilience:

Designed for industry-level durability with an operating temperature range of -40°C to +65°C

, making it suitable for outdoor deployment in wireless cabinets. Exclusive 5G-Ready Features

The router integrates several next-generation protocols and features essential for 5G network evolution: Network Slicing (FlexE):

It utilizes FlexE-based slicing to provide hard isolation between services. This ensures that different service slices do not interfere with each other, meeting strict SLA requirements for various 5G use cases. Advanced Routing Protocols: Full support for (Segment Routing over IPv6) and Huawei ATN 910D-A is a compact, high-capacity 1U

, allowing for simplified network control and smoother evolution from traditional MPLS. High-Precision Timing: Supports the

high-precision clock synchronization protocol, which is critical for the phase and time accuracy required by 5G base stations. Intelligent Maintenance: Features like

(in-situ Flow Information Telemetry) enable real-time performance monitoring and millisecond-level fault detection. Deployment and Reliability ATN 910D-A is engineered for ease of use and high availability: Plug-and-Play (PnP):

Supports automatic configuration for rapid large-scale deployment. Redundancy:

Equipped with dual power supplies (AC/DC) to ensure 1+1 backup and power redundancy protection. Uniform Management:

It shares the same software platform and maintenance interfaces as larger Huawei routers (like the NetEngine 8000 series ), enabling unified network management.

For further technical details, including command-line references and installation guides, you can visit the official Huawei ATN 910D-A Support Page ATN 910D-A with other models in the series, such as the ATN 910D-C ATN 910C - Huawei Carrier

Huawei ATN 910D-A is a compact, 1U fixed-case multi-service access router designed for 5G-oriented mobile backhaul and VIP private line services. It is characterized by its high switching capacity of 800 Gbps to 880 Gbps

, allowing it to facilitate massive data throughput in a small form factor. Huawei Carrier Key Technical Specifications ATN 910D-A

provides high-density port configurations to meet evolving network demands: Port Density Switching Capacity : 800 Gbps (standard) to 880 Gbps (peak). Physical Dimensions : Approximately depending on AC or DC chassis. Power Reliability : Supports dual AC or DC power modules for redundancy. Huawei Carrier Exclusive 5G and Service Features Designed for "Cloud-Network Synergy," the ATN 910D-A integrates several advanced protocols: Modern Routing : Full support for Segment Routing (SR/SRv6)

, simplifying tunnel technology and improving network load efficiency. Network Slicing : Implements FlexE (Flexible Ethernet)

to divide physical ports into multiple sub-interfaces for strict service isolation. Precision Timing : Support for

high-precision clock synchronization, essential for 5G base station operations. In-situ Flow Information Telemetry (iFIT)

: Enables real-time service quality monitoring and fast fault location. Huawei Carrier Environmental and Reliability Design

The device is built to operate in harsh industrial environments: Temperature Range : Functions reliably from negative 40 raised to the composed with power C positive 65 raised to the composed with power C

, supporting outdoor cabinet deployments alongside wireless baseband units (BBU). Fan Redundancy : Equipped with three fans in a

backup configuration, ensuring stable cooling even if a single fan fails. Quick Recovery

: Hardware-based OAM and BFD support fast link failure detection within and switchover times of less than Huawei Carrier

Further technical documentation and firmware details are available on the Huawei Support Portal table or more information on the SRv6 migration capabilities of this model? ATN910C - Huawei Carrier

Huawei ATN 910D-A is a compact, high-capacity 1U router designed specifically for 5G mobile backhaul and VIP private line services

. It serves as a 5G-ready access device that supports high-density 100GE interfaces and advanced features like network slicing and SRv6. Huawei Carrier Key Technical Specifications

The ATN 910D-A is built to handle the massive bandwidth requirements of 5G networks while maintaining a small physical footprint. Switching Capacity : Supports up to Port Density Dimensions : Standard 1U height ( : Dual DC/AC power supply with backup; typical power consumption is approximately Environment : Operating temperature range from , making it suitable for outdoor cabinet installations. Advanced 5G Features Network Slicing

(Flexible Ethernet) to provide hardware-level isolation for different services, ensuring that private line traffic is not affected by mobile traffic. Next-Gen Protocols : Supports

(Segment Routing over IPv6) and EVPN for simplified network programming and automated service deployment. Clock Synchronization : Features high-precision clock synchronization including and Synchronous Ethernet. Intelligent O&M : Incorporates

(In-situ Flow Information Telemetry) for real-time service quality monitoring and hop-by-hop performance detection. Huawei Carrier Documentation and Setup

For detailed technical guidance, you can refer to the following official and community resources: Official Support Huawei Support Portal

provides technical manuals, license queries, and software upgrade instructions. Installation Guides

: Step-by-step hardware setup, including rack mounting and cabling, is available via the ATN 910D-A Installation Guide Product Brochure

: A comprehensive visual overview of specifications can be found in the ATN 910D-A Brochure on this device or details about specific transceivers compatible with its 100GE ports? Huawei ATN 910D-A Support Guide, Manuals & PDF

Supported Protocols:

• Layer 2: 802.1Q VLAN (4K), QinQ, STP/RSTP/MSTP, LACP.
• Layer 3: Static, OSPFv2/v3, IS-IS, BGP-4.
• MPLS: LDP, RSVP-TE, MPLS L2VPN (VLL/VPLS), MPLS L3VPN.
• Circuit Emulation: SAToP (RFC 4553), CESoPSN (RFC 5086) – Critical for E1 transport.
• Sync: SyncE (ITU-T G.8262), IEEE 1588v2 PTC (Ordinary Clock and Boundary Clock).
• Management: SNMPv3, NETCONF, SSHv2, Huawei U2000 NMS.

Exclusive Feature: The 910DA supports PW (Pseudowire) Redundancy at sub-50ms failover, matching SDH ring performance for migration projects.

Limitations & considerations

• Performance varies greatly by network conditions, carrier support for CA/MIMO, and antenna setup.
• Some advanced enterprise features may require specific firmware or licensing.

If you want, I can:

• Produce a printable PDF datasheet with these specs and diagrams.
• Look up exact band tables, regulatory certifications, and model numbers for the specific region (requires the target country).

(Note: I assumed typical specs across Huawei ATN-series outdoor access terminals; exact values vary by specific 910DA SKU and region.)

The Huawei ATN 910D-A is a compact 1U fixed-box router designed for 5G access and high-density 100GE/50GE port configurations. It features an 800 Gbps switching capacity and supports advanced technologies like SRv6, EVPN, and iFIT for real-time network monitoring. For more detailed technical documentation and manuals, you can visit the Huawei ATN 910D-A Support Page. ATN Series - Huawei Carrier

The Huawei ATN 910D-A is a compact, high-performance router designed for high-density 5G-ready access and metropolitan area networks (MAN). As a core member of the Huawei ATN Series, it bridges the gap between traditional access and next-generation 100G networking by offering a massive 800 Gbps switching capacity in a slim 1U form factor. Huawei ATN 910D-A Key Specifications

The ATN 910D-A is engineered to handle massive data throughput required by 5G base stations and VIP private line services. Technical Specification Switching Capacity Form Factor 1U Height, 220mm Depth Interface Density 4100GE/50GE + 1625GE/10GE/GE + 8*10GE/GE/FE Operating Temp -40°C to +65°C (Support for outdoor deployment) Redundancy Dual DC/AC, 1+1 backup Clock Sync High-precision 1588v2 clock synchronization Core Features and Exclusive Technologies

5G-Ready Capabilities: Built to support SR/SRv6 (Segment Routing over IPv6), EVPN, and iFIT (in-situ Flow Information Telemetry) for real-time network performance monitoring.

FlexE Slicing: Provides hard network slicing based on FlexE (Flexible Ethernet) deployment, allowing for physical isolation of services to ensure low-latency performance for critical applications.

Ultra-Compact Design: At just 220mm deep, the unit can be co-located with base station equipment in the same cabinet, significantly reducing deployment footprints.

Industrial-Level Reliability: The device uses high-quality industrial components and advanced heat dissipation to operate in extreme environments ranging from -40°C to +65°C. Product Comparison: ATN 910D-A vs. ATN 910D-C

While both routers belong to the same series, their performance targets differ slightly for specific aggregation needs.

Capacity: The ATN 910D-A reaches 800 Gbps, while the ATN 910D-C is rated for slightly higher 880 Gbps capacity with 1.76 Tbps switching throughput.

Dimensions: Both share the 1U height, but the ATN 910D-C has a wider chassis width at 442mm. High-performance hardware platform : The ATN 910DA is

Ports: Both support high-density 100GE/50GE ports, but the 910D-A is specifically optimized for base station access with its port mix of 100G, 25G, and GE.

Detailed documentation and firmware updates are available through the Huawei Support Portal, which requires authorized equipment accounts for specific downloads. ATN Series - Huawei Carrier

Huawei ATN 910DA Datasheet Guide

Introduction

The Huawei ATN 910DA is a high-performance, compact, and versatile network equipment designed for small to medium-sized enterprises, data centers, and service provider networks. This guide provides an overview of the Huawei ATN 910DA datasheet, highlighting its key features, specifications, and use cases.

Key Features

1. Compact Design: The ATN 910DA is a compact, 1RU (1 rack unit) device, ideal for space-constrained environments.
2. High-Performance: Equipped with a powerful processor and ample memory, the ATN 910DA delivers high-performance routing, switching, and security features.
3. Multi-Gigabit Ethernet: The device supports multiple Gigabit Ethernet ports, including 10G and 2.5G, providing flexible connectivity options.
4. Advanced Security: The ATN 910DA features robust security capabilities, including firewall, VPN, and threat detection and mitigation.
5. Flexible Management: The device supports various management interfaces, including CLI, WebUI, and SNMP, ensuring easy configuration and monitoring.

Specifications

1. Hardware Specifications
   • Processor: 64-bit, quad-core processor
   • Memory: 8 GB RAM, 2 GB Flash
   • Storage: 1x USB 2.0 port
2. Network Specifications
   • 8x GE (RJ45) ports
   • 2x 10GE (SFP+) ports
   • 2x 2.5GE (RJ45) ports
   • 1x MGMT (RJ45) port
3. Performance Specifications
   • Routing performance: up to 10 Gbps
   • Switching performance: up to 20 Gbps
4. Security Specifications
   • Firewall: Stateful inspection, zone-based firewall
   • VPN: IPSec, L2TP, PPTP
   • Threat detection and mitigation: integrated

Use Cases

1. Enterprise Networks: The ATN 910DA is suitable for small to medium-sized enterprises, providing a compact, high-performance network solution for LAN and WAN deployments.
2. Data Centers: The device can be used in data centers to provide high-density, low-latency connectivity for servers and storage systems.
3. Service Provider Networks: The ATN 910DA can be used by service providers to offer high-performance, secure network services to their customers.

Additional Information

1. Operating System: The ATN 910DA runs on Huawei's VRP (Versatile Routing Platform) operating system.
2. Warranty: The device comes with a standard 1-year warranty, with optional extended warranty options available.
3. Support: Huawei provides comprehensive support for the ATN 910DA, including documentation, software updates, and technical support.

Conclusion

The Huawei ATN 910DA is a versatile, high-performance network equipment suitable for various applications, including enterprise networks, data centers, and service provider networks. This guide provides a comprehensive overview of the device's key features, specifications, and use cases. For more detailed information, refer to the official Huawei ATN 910DA datasheet.

The Huawei ATN 910D-A is a large-capacity, 1U case-shaped router designed for 5G mobile backhaul and VIP private line services. It features an 880Gbps switching capacity and high-density 100GE ports, making it suitable for large-scale access device deployment. Key Technical Specifications

The ATN 910D-A is built for high-performance intelligent IP networks with a focus on 5G-ready features. Switching Capacity: 880Gbps. Interface Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports. Dimensions: 442mm x 220mm x 44.45mm (1U height).

Weight: Approximately 4.2 kg (DC) to 4.3 kg (AC) without packaging.

Power Consumption: Typical power consumption is approximately 180W.

Power Redundancy: Supports dual DC/AC power inputs with 1+1 backup.

Operating Temperature: Industrial-grade design supporting -40°C to +65°C, allowing for outdoor cabinet deployment. Advanced Features

The router supports modern networking protocols required for high-speed data transmission and 5G slicing.

L3 Features: Supports OSPF, BGP, ISIS, Static routes, and advanced IPv6 features like 6PE and 6VPE.

SR/SRv6 & EVPN: Fully supports Segment Routing (SR) and SRv6 (BE/Policy), as well as Ethernet VPN (EVPN) for both L2 and L3 services.

Network Slicing: Implements slicing based on FlexE deployment to meet different 5G service requirements.

Synchronization: High-precision clock synchronization including IEEE 1588v2, G.8275.1, and Synchronous Ethernet.

OAM & Management: Includes features like iFIT (in-situ Flow Information Telemetry) for real-time performance monitoring and Plug-and-Play (PnP) for simplified deployment. Application Scenarios ATN 910D-A Brochure v2.0 | PDF - Scribd

As 5G networks transition from a futuristic concept to a global standard, the pressure on "last-mile" access has never been higher. Enter the Huawei ATN 910D-A

, a 1U fixed multi-service access router designed specifically for the heavy lifting of 5G-oriented bearer networks.

Whether you're looking to upgrade mobile base station backhaul or enhance VIP private line services, this datasheet breakdown explores why the ATN 910D-A is a critical piece of the Huawei ATN Series High-Density Performance in a 1U Frame Don't let the slim 1U form factor fool you. The ATN 910D-A

is engineered for high-capacity, high-performance environments. Its primary mission is to bridge the gap between 4G and 5G requirements, providing a seamless evolution path for service providers. Versatile Interface Support

: One of its strongest selling points is the sheer variety of ports. The device supports 100GE, 50GE, 25GE, 10GE, and FE

service interfaces. This range allows operators to scale bandwidth as their traffic demands grow without replacing hardware. Dual Power Protection : Reliability is non-negotiable in telecom. The supports both AC and DC power supplies with built-in power redundancy protection

, ensuring that a single power failure doesn't take down the entire site. Built for the Future: SRv6 and EVPN

Modern networks aren't just about speed; they're about intelligence. The Huawei ATN 910D-A

is prepped for the latest software-defined networking (SDN) features: SRv6 (Segment Routing over IPv6)

: Simplifies network protocols and enables massive connectivity, essential for 5G "Everything" networks. EVPN (Ethernet VPN)

: Provides a unified control plane for different types of services, improving efficiency and reducing management overhead. FlexE (Flexible Ethernet)

: Allows for hard network slicing, ensuring that critical services (like emergency or VIP data) have guaranteed bandwidth that isn't impacted by general traffic. Precision Timing with 1588v2 5G requires ultra-precise synchronization to function. The ATN 910D-A supports the 1588v2 high-precision clock

feature. This ensures that every base station connected to the router is perfectly in sync, which is vital for low-latency applications and smooth handovers between cells. Why It Matters for Your Network ATN 910D-A

isn't just a router; it’s an investment protection strategy. By supporting legacy interfaces alongside 100GE uplinks, it allows carriers to maintain existing services while being "5G Ready." If you are managing a network that is scaling rapidly, the detailed documentation

and 3D hardware models provided by Huawei can help your team plan deployments with pinpoint accuracy. for SRv6 on this device or perhaps a comparison between the and the earlier 910C models?

The Huawei ATN 910D-A is a compact 1U, 800Gbps high-capacity fixed-port router designed for 5G base station access and VIP private line services. It supports advanced features such as FlexE slicing, SRv6, and iFIT, optimized for high-density, low-latency network environments with an operating temperature range of -40°C to +65°C. Detailed technical specifications and manuals are available on the Huawei Support Site. ATN 910D-A Brochure v2.0 - Scribd

3. Physical & Hardware Specifications

| Parameter | Specification | |----------------------------|----------------------------------------| | Dimensions (H×W×D) | 44 × 442 × 220 mm (1U) | | Weight (fully loaded) | ~3.5 kg | | Fixed ports | 4 × GE SFP, 2 × FE electrical | | Expansion slots | 2 (supports 4×GE, 2×10GE, E1/T1, etc.) | | Max 10GE ports | 2 | | Max GE ports | 12 | | Power consumption (typical)| 35 W | | MTBF | >50 years |

Part 6: Competitive Comparison – Why "Exclusive" Matters

How does the ATN 910DA compare to Cisco’s ASR 903 or Nokia’s 7210 SAS?

| Feature | Huawei ATN 910DA | Cisco ASR 903 | Nokia 7210 SAS-M | | :--- | :--- | :--- | :--- | | E1 Port Density | 8 (Internal) | 4 (Requires module) | 8 (Requires separate card) | | Industrial Temp | -40°C to +70°C | 0°C to 40°C (Standard) | -40°C to +65°C | | Power Consumption | 45W (Max) | 150W (Typical) | 90W | | Form Factor | 1U (Half-width rack option) | 2U (Full-width) | 1U (Full-width) | | Layer 3 BGP Routes | 50k | 200k | 100k |

Exclusive Verdict: The 910DA loses on raw BGP scale but wins on E1 density per watt and physical footprint. It is a niche champion, not a core router.