Zolid Hi-speed Dvd Maker Driver Windows 10 • Real

The Zolid Hi-Speed DVD Maker (often model P50589) is a legacy USB video capture device originally designed for Windows XP and Vista. Getting it to work on Windows 10 can be challenging because the manufacturer no longer provides official modern drivers. Driver Download & Compatibility

Since there is no official support site, users typically rely on community archives or third-party repositories:

Internet Archive: A reliable source for the original installation disk image (ISO) which includes the drivers and software like ArcSoft ShowBiz.

Manual Installation: You can download generic "Hi-Speed USB DVD Creator" drivers that support Windows 10 from third-party sites like Driver Scape.

Hardware Identification: The device often uses the ITE it9910 chipset (USB ID: 048D:9009). Knowing this can help you find compatible "generic" drivers if the Zolid-branded ones fail. Installation Steps for Windows 10

Windows 10 often rejects legacy drivers due to security settings. Follow these steps for the best chance of success:

Disable Driver Signature Enforcement: Legacy drivers are often unsigned. Go to Settings > Update & Security > Recovery > Advanced Startup (Restart Now). Then navigate to Troubleshoot > Advanced Options > Startup Settings > Restart, and press 7 or F7 to disable driver signature enforcement. zolid hi-speed dvd maker driver windows 10

Install the Driver First: Do not plug in the device before installing the driver. Run the setup from the archive or installation disk. Device Manager Update: Plug in the device. Open Device Manager.

Right-click the "Unknown Device" (or similar), select Update Driver, and choose "Browse my computer for drivers" to point it to the folder where you extracted the driver files.

Use Compatibility Mode: If the installer fails to run, right-click the .exe file, select Properties > Compatibility, and choose Windows XP (Service Pack 3) or Windows 7. Essential Software Tips

ArcSoft ShowBiz: The original software bundled with the device is often required to recognize the video stream.

Modern Alternatives: If the original software doesn't work on Windows 10, try free capture software like OBS Studio or PotPlayer, which can often interface with the device once the drivers are correctly installed.

Capture Settings: For best results digitizing VHS to PAL DVD, set your capture resolution to 720x576 at 25 fps (MPEG-2 format). The Zolid Hi-Speed DVD Maker (often model P50589)

Note: If Windows 10 still refuses to recognize the device, it may be due to the 64-bit architecture of your OS. Many older Zolid drivers were only designed for 32-bit systems.

Zolid hi-speed dvd maker P50589 install disk - Internet Archive

The Ultimate Guide to the Zolid Hi-Speed DVD Maker Driver on Windows 10

Last Updated: October 2025

If you are reading this, you likely have an external USB DVD burner—specifically the Zolid Hi-Speed DVD Maker—and you are struggling to get it to work properly on a modern Windows 10 PC. You are not alone.

In the early 2010s, Zolid was a popular brand for affordable, portable external DVD writers. However, as Microsoft pushed Windows 10 updates (and now Windows 11), many legacy devices faced driver compatibility issues. This article serves as the definitive resource for installing, troubleshooting, and optimizing the Zolid Hi-Speed DVD Maker driver for Windows 10.

Step 3: Disable USB Selective Suspend (Crucial for Zolid)

The Zolid Hi-Speed DVD Maker is very sensitive to power-saving features. Windows 10 often cuts power to inactive USB ports, which the DVD maker interprets as an eject command. Step 3: Disable USB Selective Suspend (Crucial for

To fix this:

  1. Open Control Panel > Power Options.
  2. Click Change plan settings next to your active plan.
  3. Click Change advanced power settings.
  4. Scroll to USB settings > USB selective suspend setting.
  5. Set it to Disabled.
  6. Click Apply and restart your PC.

Troubleshooting steps

  1. Check Device Manager:

    • Open Device Manager → look under “DVD/CD-ROM drives” and “Universal Serial Bus controllers.”
    • If device shows with a yellow warning icon or as “Unknown device,” note the hardware IDs (right-click → Properties → Details → Hardware Ids).

  2. Install/update generic drivers:

    • In Device Manager, try “Update driver” → “Search automatically for drivers.”
    • If automatic fails, choose “Browse my computer for drivers” → “Let me pick from a list” → select “DVD/CD-ROM drives” or “USB Mass Storage Device” generic driver.

  3. Use Windows Update:

    • Run Windows Update to fetch optional drivers. Some mass-market drivers are delivered there.

  4. Try different USB ports/cables:

    • Use a powered USB port or a Y-cable (some slim drives need extra power). Try USB 2.0 vs USB 3.0 ports.

  5. Uninstall and reinstall:

    • In Device Manager, uninstall the device (right-click → Uninstall device), disconnect, reboot, and reconnect to let Windows re-detect.

  6. Check burning software:

    • Test with built-in Windows Disc Image Burner or a third-party app (ImgBurn, CDBurnerXP, BurnAware). If one app fails and another works, it’s a software compatibility issue.

  7. Firmware and chipset drivers:

    • If hardware IDs identify a chipset manufacturer (e.g., Prolific, MediaTek), search for that chipset’s Windows 10 driver. Firmware updates for white-label drives are rare and risky; avoid unless from a trusted manufacturer.