Xp-n160ii Driver Download Repack Windows 10 — Xprinter

To download and install the driver for the Xprinter XP-N160II Windows 10

, you should generally use the universal thermal receipt printer driver provided by the manufacturer. Driver Download & Installation Steps Download the Driver Visit the official Xprinter Support/Download page Look for the "Receipt Printer Driver (Windows)" "Xprinter Windows Driver" . This universal driver supports the XP-N160II model. Run the Installer Open the downloaded Right-click the setup file and select Run as Administrator Configure Settings Windows 10 Select Interface (most common for this model) or depending on your connection. Select Printer Series (if listed). If neither is specific, use the 80mm series Finish Installation Install Now Once finished, go to Settings > Devices > Printers & Scanners to confirm the printer is listed and set it as the default. Quick Troubleshooting Port Selection : If the printer doesn't print, go to Printer Properties > Ports

and ensure the correct USB port (e.g., USB001 or USB002) is selected. DIP Switches

: Ensure the physical switches on the bottom of the printer are set correctly for your communication speed (Baud rate). cash drawer port for this printer? Xprinter Xp-n160ii Driver Download Windows 10

Xprinter XP-N160II driver for Windows 10 enables high-performance 80mm thermal receipt printing with features designed for retail and hospitality environments. Core Driver Features Broad Connectivity Support

: The driver facilitates seamless communication across multiple interfaces, including USB, LAN, Bluetooth, and Wi-Fi , allowing it to integrate into various POS setups. ESC/POS Command Compatibility

: It is fully compatible with standard ESC/POS printing commands, ensuring it works with most commercial retail POS software. High-Speed Output To download and install the driver for the

: When correctly configured on Windows 10, the driver supports the printer's maximum speed of , significantly reducing customer wait times. Automated Paper Cutting : The driver manages the integrated auto-cutter

, which is rated for up to 1.5 million cuts, ensuring clean and efficient receipt handling. Graphics and Character Customization

: It supports bitmap and graphic downloads, as well as adjustable character sizes and line spacing for personalized receipt branding. AliExpress Installation Highlights Multi-OS Compatibility Frequently Asked Questions (FAQ) 1

: Beyond Windows 10, the driver package often includes support for Windows XP, 7, 8.1, and Linux. Simple Setup Process

: Official installation guides emphasize a straightforward "click and install" process through the Xprinter Official Driver Page Advanced Networking

Frequently Asked Questions (FAQ)

1. Before you start — checklist

• Printer model: Confirm the label on the printer reads “XP-N160II” (or XP-N160 II).
• Windows version: Confirm you’re running Windows 10 (32-bit or 64-bit). To check: Settings > System > About.
• Connection type: USB, Serial (RS-232), Parallel, or Ethernet/Wi‑Fi (if using a network-enabled version or converter).
• Power and cables: Ensure the printer is plugged in and powered on; USB cables and network cables are in good condition.
• Administrator rights: You’ll need admin rights on the PC to install drivers.

Alternative: Using XP-N160II with USB and Ethernet

The XP-N160II supports multiple interfaces. For network printing (shared POS systems):

1. Download the same Windows 10 driver.
2. During installation, choose Ethernet / Network.
3. Assign a static IP to the printer (default is often 192.168.0.100).
4. In Windows, add a TCP/IP port using that IP address.

Issue 1: "Driver is unavailable" or Yellow Exclamation Mark

• Cause: Windows 10 Driver Signature Enforcement blocks unsigned Xprinter drivers (older versions).
• Fix: Reboot Windows 10 → While booting, press F8 → Select "Disable Driver Signature Enforcement" → Install driver again.

Issue 5: The printer works but auto-cutter does not cut

• Cause: The driver’s "Cut after print" command is disabled.
• Fix:
  • Right-click printer → Printing Preferences → Advanced Options.
  • Find "Document cutting" → Set to "Cut (Partial cut)" or "Feed and cut".

Step 5: Set as default (Optional)

1. Press Windows + R, type control printers, and hit Enter.
2. Find Xprinter XP-N160II.
3. Right-click it and select Set as default printer.

11. Integration with POS software

• Configure the POS settings to the printer’s port (COM#, TCP/IP).
• Many POS systems support ESC/POS out of the box; select “EPSON” or “ESC/POS” compatible driver if a direct Xprinter option is unavailable.
• For custom applications, use the vendor’s SDK or send raw ESC/POS commands over the COM/TCP port.