Xprinter Xp-58iiht Driver

To set up your Xprinter XP-58IIHT, you will need to download the official drivers and properly load the thermal paper. Driver Download & Installation

The XP-58IIHT typically uses the standard 58mm series driver. You can find the latest version on the Xprinter Official Driver Page.

Download: Locate the "58mm Series Printer Driver" (often labeled for Windows or Linux) on the official site.

Connection: Connect the printer to your PC via the USB cable and turn it on before running the installer.

Setup: Run the downloaded setup file. In the installation menu, select the XP-58 series and choose the correct port (usually USB001).

Verification: After installation, go to your PC's Printers & Scanners settings, find the Xprinter, and click Print Test Page to confirm it is working. Loading Thermal Paper The XP-58IIHT uses 58mm wide thermal paper rolls.

Open the Cover: Press the button or lift the latch to open the top paper compartment. xprinter xp-58iiht driver

Orientation: Place the paper roll so the paper feeds from the bottom of the roll.

Secure: Pull a small amount of paper out past the cutter, then press the center of the cover down firmly until it clicks to ensure it is properly loaded. Key Specifications XP-58IIHT - Xprinter

The Xprinter XP-58IIHT is a 58mm thermal receipt printer widely used for POS systems in retail, restaurants, and small businesses. Setting it up correctly requires the right driver version and specific configuration steps to ensure features like the auto-cutter function properly. Quick Setup Guide Download the Driver: Use the XPrinter Driver Setup V7.77 or higher.

Avoid using the outdated drivers found on the bundled CD, as they often have compatibility issues with newer versions of Windows. Installation Steps:

Connect & Power On: Plug the USB cable into your computer and ensure the printer is turned on before starting the setup.

Extract Files: Drivers are typically downloaded as a ZIP file. Right-click the folder and select "Extract All" before running the setup file. To set up your Xprinter XP-58IIHT , you

Configure Printer Type: During the installation, you must select the correct printer series. For the XP-58IIHT, select the XP-58 series; however, some users have found better compatibility by selecting XP-80C to enable advanced logic like auto-cutting. Connectivity Options:

USB Connection: Most reliable for desktop POS systems. Windows usually detects the printer once the driver is installed.

Bluetooth: For mobile use, pair with the device named "Printer001" using a dedicated Bluetooth printer app. Hardware Maintenance:

Ensure the thermal paper roll is placed with the leading edge pulling toward you.

Close the cover firmly to avoid paper loading errors or faint printing. Key Specifications XP-58IIHT - Xprinter

Here’s a complete guide to finding, installing, and troubleshooting the XPrinter XP-58IIHT driver. The Ultimate Guide to the Xprinter XP-58IIHT Driver:

The XP-58IIHT is a 58mm thermal receipt printer that connects via USB, Serial (RS-232), and Ethernet. It works with Windows, Mac, Linux, Android, and POS systems.

The Ultimate Guide to the Xprinter XP-58IIHT Driver: Installation, Troubleshooting, and Setup

If you run a small retail shop, a fast-food counter, or a food truck, you have likely encountered the need for a reliable, high-speed receipt printer. The Xprinter XP-58IIHT is one of the most popular 58mm thermal receipt printers on the market, known for its blazing-fast USB and Ethernet connectivity. However, like any peripheral, it is useless without the correct software. The single biggest hurdle users face is finding, installing, and troubleshooting the Xprinter XP-58IIHT driver.

In this comprehensive 2,000-word guide, we will cover everything you need to know about the XP-58IIHT driver—from where to download safe, malware-free files to step-by-step installation guides for Windows, Mac, and POS systems.

USB connection (most common)

  1. Do not connect printer yet (or connect then cancel auto driver search).
  2. Run the downloaded .exe installer as Administrator.
  3. Choose USB when asked.
  4. Connect printer via USB cable and power it on.
  5. Windows will auto-detect and finish installation.

6. Troubleshooting Common Driver Issues

For Virtual COM port (if using Serial version):

Some XP-58IIHT units have a serial interface. You will need to create a virtual COM port and map it to USB using a utility like "Virtual Serial Port Emulator."

Step 1: Download and Extract

After downloading the driver ZIP file, right-click and select "Extract All."

Part 5: Configuring Printer Settings for Optimal Performance

Once installed, configure these settings:

  1. Paper Size: Open printer properties > Preferences > Advanced. Set paper size to 58mm x 297mm (or “58mm x Continuous”). If not listed, create a custom size.
  2. Print Speed: Set to High (250mm/s) unless you experience skipping.
  3. Density (Darkness): Default is 8 (1–15 scale). Increase to 12 if prints are too light.
  4. Cut Option: Enable “Cut paper after print” if using an auto-cutter model (XP-58IIHT C variant).
  5. Cash Drawer: Under “Device Settings,” assign the drawer kick to the same port (usually pin 2).

Part 8: Driver Alternatives & Virtual POS Printers

If you cannot get the official driver to work, consider these alternatives:

  1. Generic / Text Only Driver – Works but loses barcodes, cuts, and drawer control.
  2. Epson TM-T20 Driver – Surprisingly compatible (since both use ESC/POS). Not perfect, but works for basic receipts.
  3. Virtual Serial Port Emulator – Convert USB to virtual COM port (e.g., com0com), then use ESC/POS commands directly. Advanced users only.

Reset printer to defaults:

  1. Turn off.
  2. Hold FEED button.
  3. Power on → keep holding until 3 beeps → release.