Xiaomi Mi Aiot Router Ax6000 Default Password New

The Xiaomi Mi AIoT Router AX6000 typically does not have a pre-set default password for the admin panel or Wi-Fi. Instead, you create these credentials during the initial setup process. 🔑 Default Credentials

If you are prompted for a password on a brand-new or factory-reset device, try these common defaults: Admin Username: Leave blank or try admin. Admin Password: Leave blank or try admin. Default IP Address: 192.168.31.1 or miwifi.com.

Default Wi-Fi Name (SSID): Look for a network starting with "Xiaomi_" followed by numbers/letters. 📍 Where to Find the Information xiaomi mi aiot router ax6000 default password new

Bottom Sticker: Most specific information, including the default Wi-Fi name and MAC address, is printed on a label on the underside of the router.

Initial Setup: For "new" units, connecting to the open "Xiaomi_XXXX" Wi-Fi network will automatically redirect you to the setup page where you must set your own password. 🔄 How to Reset (If you forgot the password) The Xiaomi Mi AIoT Router AX6000 typically does

If the default admin credentials don't work, someone likely configured the router previously. You must perform a Factory Reset:

MI Wifi6 AX6000 | Router Configuration | Step by Step | 2023 Connect the Hardware: Connect the WAN port (the

2. How to Set Up Your New Router

Since this is a new device, you will likely need to configure it for the first time. Here is the standard procedure:

  1. Connect the Hardware: Connect the WAN port (the blue/grey port) to your modem/modem's LAN port using an Ethernet cable. Plug in the power adapter.
  2. Connect to the Network: On your phone or computer, search for Wi-Fi networks. Look for a network named "Xiaomi_AX6000_xxxx" (the 'x's represent the last digits of the MAC address).
  3. Connect: Connect to this network. It is open and has no password initially.
  4. Automatic Pop-up: Once connected, the setup page should automatically appear. If it doesn't, open a web browser and type 192.168.31.1 or miwifi.com in the address bar.
  5. Create Your Password:
    • The interface will ask you to set a Router Management Password.
    • It is recommended to check the box that says "Set Wi-Fi password same as management password" to make it easier to remember.
    • Click "Next" to complete the setup.

3. The "New" Router Scenario (Factory Fresh)

If you have purchased a new, unopened AX6000:

  1. Turn the router over.
  2. Read the SSID (Wi-Fi name, e.g., Xiaomi_XXXX) and the Initial Password from the sticker.
  3. Connect your phone/PC to that Wi-Fi using the sticker password.
  4. Open the Mi Wi-Fi app or a browser to 192.168.31.1.
  5. The setup wizard will force you to create a new Wi-Fi name and password. Once you do this, the sticker password is permanently deactivated.

2. No Default "Admin" Username/Password for Web Interface