Vmware Esxi 70 Update 3 Hpe Customized Iso Image Download |best| Top < Top 20 RECENT >

To download the VMware ESXi 7.0 Update 3 HPE Customized ISO, you must now use the Broadcom Support Portal following the shift from legacy VMware Customer Connect. These manufacturer-specific images are critical for HPE ProLiant Gen9, Gen10, and newer servers because they integrate essential network and storage controller drivers not found in the generic VMware image. Download Instructions via Broadcom Support Portal

As of 2024, standard downloads require a support contract, but some vendor-customized ISOs may still be accessible via the portal's custom tabs.

Access the Portal: Log in or register at the Broadcom Support Portal.

Navigate to Downloads: Select VMware Cloud Foundation from the dropdown menu near your username, then click My Downloads on the left.

Search for vSphere: Use the search bar for VMware vSphere and select the version you are entitled to (e.g., Enterprise or Enterprise Plus).

Locate Custom ISOs: Select version 7.0 from the version dropdown and click the Custom ISOs tab.

Filter and Download: Search for "HPE" to find the HPE Custom Image for ESXi 7.0U3 Install CD. Click the download link next to the desired image. Important Release Details for HPE Custom ISOs

Latest Releases: Recent customized images for 7.0 U3 were published as recently as February 2025. Hardware Compatibility:

Gen9 Servers: The last fully tested end-to-end combo for Gen9 hardware is typically the July 2022 HPE Custom Image used alongside SPP 2022.03.1.

Synergy Servers: Specific ISOs and Add-ons are required for HPE Synergy hardware; ensure you select the "Synergy only" variants if applicable.

Retired Tools: Images released after July 2022 no longer include legacy utilities like HPONCFG or BOOTCFG; these have been replaced by the HPE iLO RESTful API Tool.

For further driver details and management software components, you can also refer to the HPE vibsdepot or the HPE Support Center.

Are you planning to perform a fresh installation or an in-place upgrade using this ISO?

🔁 Alternative if HPE site is slow

Use VMware Customer Connect (with VMware account) → search for “HPE” → but HPE’s site always has the latest HPE-tested version.

The HPE customized ISO for VMware ESXi 7.0 Update 3 is no longer hosted on the old VMware Customer Connect site. It must now be downloaded through the Broadcom Support Portal, as Broadcom has integrated VMware's software distribution. Download Instructions

To find the official HPE custom image, follow these steps on the Broadcom Support Portal: Log In: Register or sign in to your Broadcom account.

Navigate to Downloads: Select VMware Cloud Foundation from the username dropdown, then click My Downloads on the left menu.

Search for vSphere: Search for "VMware vSphere" in the top right search bar and select the appropriate version (e.g., VMware vSphere Enterprise). Filter for Custom ISOs: Select version 7.0. Navigate to the Custom ISOs or OEM Addons tab. Search for HPE to locate the specific customized images.

Identify Version: Common file names for this version include:

VMware-ESXi-7.0.3-21424296-HPE-703.0.0.11.3.0.5-Apr2023.iso.

VMware-ESXi-7.0.3-19193900-HPE-703.0.0.10.8.1.3-Jan2022.iso. Why Use the HPE Customized ISO?

Driver Integration: It includes specialized drivers for HPE network and storage controllers that are not found in the standard VMware ISO.

Management Tools: Pre-installs essential software like the HPE iLO Driver, Agentless Management Service (AMS), and Smart Update Tool (iSUT).

Hardware Support: Required for a successful installation on many ProLiant servers; specifically, the July 2022 image is the last version verified to support HPE Gen9 servers. Alternative Update Method

If you already have a standard ESXi installation, you can apply the HPE customizations via the HPE vibsdepot using offline bundles and the ESXCLI command-line tool. VMware ESXi Images for HPE Servers

VMware ESXi 7.0 Update 3 HPE Customized ISO is the essential installer for HPE ProLiant, Synergy, and Apollo servers. It integrates critical hardware-specific drivers (storage controllers, network cards) and management tools (HPE iLO, Agentless Management Service) that are not present in the generic VMware image. Hewlett Packard Enterprise Top Download Sources & Method

As of early 2024, the download process has shifted from the legacy VMware Customer Connect to the Broadcom Support Portal Hewlett Packard Enterprise Primary Source: Broadcom Support Portal Log in (or register) at the Broadcom Support Portal VMware Cloud Foundation from the dropdown menu. My Downloads on the left menu. Search for VMware vSphere and select version Navigate to the Custom ISOs tab and filter for HPE Information Hub: HPE VMware ESXi Images Page This page provides the HPE Support Matrix to verify server compatibility.

It lists current and archived versions but will redirect you to Broadcom for the actual file download. Hewlett Packard Enterprise Key Build Versions Release Date Image Filename (Example) Build Number VMware-ESXi-7.0.3-24411414-HPE-703.0.0.11.9.0.5-Feb2025.iso VMware-ESXi-7.0.3-21424296-HPE-703.0.0.11.3.0.5-Apr2023.iso HPE Custom Image 703.0.0.10.9.1 Important Deployment Notes

vSphere 7 End of Support Life: What You Need to Know - Rimini Street

The HPE Customized ISO Image for VMware ESXi 7.0 Update 3 is the recommended installation medium for running VMware vSphere on HPE ProLiant, Synergy, and Superdome Flex servers. This specialized image integrates critical Hewlett Packard Enterprise (HPE) drivers and management agents directly into the base VMware ESXi installer, ensuring hardware stability and full management capabilities from the moment of deployment. Key Features of the HPE Customized Image

The HPE custom image significantly simplifies the installation process for modern hardware. Key components included are:

HPE Management Tools: Features integrated UEFI platform support, the HPE iLO Driver, and the SSACLI Utility for storage management.

HPE Agentless Management Service (AMS): Supports active health monitoring and agentless management through the iLO.

Verified Device Drivers: Includes VMware IOVP certified drivers for HPE-specific network and storage controllers, such as those found in Gen9 and Gen10 servers.

Integrated Smart Update Tool (iSUT): Enables seamless firmware and driver updates via the iLO repository. How to Download the HPE ESXi 7.0 Update 3 ISO

Following the transition of VMware services, all official downloads are now managed through the Broadcom Support Portal. To download the VMware ESXi 7

Access the Portal: Log in to the Broadcom Support Portal with your registered credentials.

Navigate to Downloads: Select My Downloads from the left-hand menu.

Search for VMware vSphere: Locate VMware vSphere within your entitled products list.

Select Custom ISOs: Under the "Custom ISOs" tab, search for "HPE" or "Hewlett Packard Enterprise".

Choose Version: Locate the entry for ESXi 7.0 Update 3 (e.g., April 2023 or latest version) and click the download button for the Install CD ISO. Benefits of Using the HPE Customized Image

Using the standard VMware ISO on HPE hardware often leads to missing drivers for critical components like RAID controllers and NICs. The HPE customized image provides: HPE Custom Image for VMware vSphere 7.0 Update 3

The Silent Stability: A Story of the HPE Customized ISO

The server room hummed with the familiar, monotonous drone of cooling fans. It was 2:00 AM, and Rajan, the lead infrastructure architect, was staring at a screen filled with red error text. The deadline for the hospital's new patient-record system migration was in six hours.

Everything had been going smoothly until he attempted the upgrade. He had used the generic VMware ESXi 7.0 installer, thinking it was a safe, standard choice. But now, his HPE ProLiant DL380 Gen10 servers were refusing to recognize the storage controller. The NICs were blinking erratically. The "Healthy" green LEDs had turned a threatening amber.

"It’s the drivers," whispered Sarah, his junior engineer, looking over his shoulder. "The generic ISO doesn't have the HPE Smart Array drivers baked in."

Rajan sighed, rubbing his temples. In the rush to deploy, he had overlooked the golden rule of hardware compatibility. He needed a clean install, and he needed it now. Time was bleeding away.

"Get the HPE customized image," Rajan said, his voice steady but urgent. "We don't have time to inject drivers manually via PowerCLI."

Sarah opened her browser, her fingers flying across the keyboard. She didn't go to a random third-party forum; she knew better. She navigated to the official HPE Support Center and then cross-referenced the VMware Compatibility Guide (VUG).

"Here," she said, highlighting the entry on the screen. "VMware ESXi 7.0 Update 3 - HPE Customized Image."

Rajan looked at the description. It wasn't just a standard ISO. This specific image was a collaborative masterpiece between VMware and HPE engineers. It was designed to speak the native language of the ProLiant hardware.

The Download

Sarah clicked the download link. The file was sizable, but the connection was dedicated.

"Look at the version," Rajan pointed out. "It matches the specific build number we need for the vCenter 7.0 U3 cluster. If we had downloaded the generic ISO and tried to force the HPE drivers later, we’d be fighting dependency hell for days."

As the progress bar crept forward, Rajan prepared the iLO (Integrated Lights-Out) console. The beauty of the HPE Customized ISO wasn't just the drivers; it was the optimization. It included HPE-specific utilities—insight agents, health drivers, and power management modules that the generic kernel knew nothing about.

The Restoration

Once the ISO was mounted to the virtual media drive via iLO, Rajan rebooted the server. He watched the boot sequence. Usually, he’d hold his breath during the storage initialization phase, waiting for a failure.

This time, the screen flickered, and the familiar ESXi installer loaded instantly. But there was a difference. Usually, there would be a pause, a scan, a struggle. Now, the HPE Smart Storage Administrator driver loaded seamlessly. The installer saw the RAID array immediately. It saw the network interfaces. It saw the server not as a collection of generic parts, but as a cohesive, engineered machine.

"Standard partitioning?" Sarah asked.

"Standard," Rajan nodded. "The image handles the rest."

They completed the installation in under ten minutes. When the server rebooted into ESXi, the DCUI (Direct Console User Interface) didn't show a single "Unknown" device. Every piece of hardware—the iLO card, the storage battery, the flexfabric adapters—was green.

Rajan opened the vSphere Host Client. He navigated to the "Hardware Health" tab. It was populated perfectly—fan speeds, temperatures, and power supply metrics were all streaming live data. This was the advantage of the customized image; it turned the server from a simple compute host into an intelligent, manageable node.

The Finish Line

By 5:30 AM, the cluster was fully operational. The patient record system VMs were spinning up, fast and stable.

Sarah leaned back in her chair, exhaling a breath she felt like she’d been holding all night. "That would have been a disaster with the generic ISO."

Rajan nodded, pouring a lukewarm cup of coffee. "The generic ISO is like a one-size-fits-all t-shirt. It covers you, but it doesn't fit right. That HPE image..." He gestured to the blinking green lights of the rack. "That’s a tailored suit. It just works."

Epilogue

The story of that night became a lesson for the whole IT department. They learned that while VMware builds the engine, HPE builds the chassis, and the HPE Customized ISO for ESXi 7.0 Update 3 was the transmission that made them work together. It wasn't just a file download; it was the difference between a sleepless night of troubleshooting and a successful, silent deployment.

The HPE customized ISO for VMware ESXi 7.0 Update 3 is primarily hosted on the Broadcom Support Portal, following Broadcom's acquisition of VMware. While Hewlett Packard Enterprise (HPE) provides detailed release notes and support documentation, the physical ISO file must be obtained through your Broadcom entitlement. Download Instructions via Broadcom Support Portal

Access the Portal: Log in to the Broadcom Support Portal with your registered credentials.

Select Product Category: Use the drop-down menu next to your username to select VMware Cloud Foundation. The Last Boot Sequence Maya’s screen glowed at

Navigate to Downloads: Click on My Downloads in the left-hand navigation pane and search for "VMware vSphere".

Choose Version: Select the 7.0 major version from the available list.

Locate Custom ISOs: Click on the Custom ISOs tab. Locate the entry for HPE Customized Image for ESXi 7.0 Update 3.

Download: Click the download icon for the specific ISO. You may need to accept the Broadcom EULA and complete a trade compliance screening before the download begins. Key Image Details & Compatibility VMware ESXi Images for HPE Servers

VMware and HPE continue to collaborate to provide optimized performance for ProLiant servers. Using the HPE-customized version of ESXi 7.0 Update 3 ensures that your hardware-specific drivers and management tools are integrated directly into the hypervisor. Why Use the HPE Customized ISO?

Standard VMware ESXi images often lack the specific drivers required for HPE hardware. Using the customized image provides:

Driver Stability: Pre-loaded drivers for Smart Array controllers and network cards.

HPE Active Health System: Built-in tools for hardware monitoring and logs.

Integrated Management: Better communication between ESXi and HPE iLO.

Optimized Performance: Specific tuning for ProLiant architecture. Top Sources for the Download

You can typically find the ISO through two primary official channels: 1. Broadcom Support Portal

Since VMware’s acquisition by Broadcom, the download location has shifted. Access: Log in to the Broadcom Support Portal.

Navigation: Search under the "VMware Cloud Foundation" or "vSphere" product categories.

Filter: Look for the "Custom ISOs" tab under the ESXi 7.0 Update 3 version. 2. HPE Support Center HPE maintains a dedicated landing page for VMware software.

Search: Use the HPE Support Center and search for "ESXi 7.0 U3."

Selection: Ensure you select the "Software - Hypervisor" category.

Verification: Check the release notes to ensure it supports your specific Gen9, Gen10, or Gen11 hardware. Quick Installation Tips

💡 Check Recipes: Always consult the HPE VMware Recipe Documentation to match your BIOS/Firmware versions with the ESXi build.

Use iLO: Mount the ISO via the iLO Remote Console for easy remote installation.

Verify MD5: Always check the checksum after downloading to prevent installation corruption.

To help you find the exact version for your server, what HPE ProLiant Generation (e.g., Gen10, Gen10 Plus) are you currently using?

The Last Boot Sequence

Maya’s screen glowed at 2:00 AM, a single line of text mocking her in the dark: “Image deployment failed. Checksum mismatch.”

Three racks of HPE Synergy frames sat silent behind her. The disaster recovery window was four hours. She had the drivers. She had the scripts. But the foundation—the VMware ESXi 7.0 Update 3 HPE Customized ISO—was corrupt.

She’d already tried the public URL. Timeout. The partner portal was under maintenance. Even the gray-beards on the forums were just linking each other in circles.

Then her senior, Leo, sent a single Slack message: “Look at the top result. Not the sponsored one. The one from the HPE support forum, posted by ‘StorageSlayer.’ Dated last Tuesday.”

Maya clicked. It was a plain-text thread. A user named StorageSlayer had written: “HPE ISO for 70U3 is being delisted tomorrow due to a NVMe patch conflict. Grab the final good build from my stash before it’s gone.”

Below it: a direct download link. No marketing. No login wall. Just a raw URL ending in HPE-Customized-Addon_Esxi70U3-Depot.zip.

Her hand hovered over the mouse.

“This feels like a trap,” she whispered.

But the cooling fans of the chassis were slowing down. The window was shrinking.

She clicked.

Download: 12.8 GB. Speed: 220 MB/s. Integrity: SHA256 verified against Leo’s screenshot.

She mounted the ISO via iLO. The Gen10 blades blinked awake. One by one, they found the image—HPE’s custom async drivers for Smart Array controllers, the amd-iommu fix, the NSX-T vibs all pre-slipped.

esxcli software profile install -d /vmfs/volumes/datastore1/HPE-70U3.iso How to get the HPE-customized ISO (concise steps)

The terminal scrolled green. Reboot required.

She held her breath.

First blade: POST. Second: vmkernel loaded. Third: hostd started. By the third minute, all twelve hosts had joined vCenter.

Maya leaned back. The DR window had 47 minutes left.

She bookmarked the forum thread, then opened a new tab and typed:

vmware esxi 70 update 3 hpe customized iso image download top

She hit Enter. This time, the top result was her own comment: “Found it. Link still works as of today. Use at once—this build is gold.”

Below it, a reply from StorageSlayer:

“You’re welcome. Now keep it on a local repo. Never trust the top result twice.”

Maya smiled. Then she copied the ISO to three different drives, two clouds, and a cold storage tape.

In IT, the legend wasn’t the software. It was knowing who to trust when the official channels failed.

The official HPE Customized ISO for VMware ESXi 7.0 Update 3 can be downloaded via the Broadcom Support Portal. Due to the transition from VMware Customer Connect to Broadcom, direct links to specific ISO files are no longer available, and users must navigate through their entitled account to access them.  Download Instructions 

To obtain the correct image for your HPE hardware, follow these steps on the Broadcom Support Portal:  Register/Log In: Sign in with your registered credentials.

Navigate to Downloads: Select VMware Cloud Foundation from the dropdown menu next to your username.

Search for vSphere: Click My Downloads on the left menu and search for "VMware vSphere" in the top-right search bar.

Select Version & Entitlement: Choose your specific entitlement (e.g., VMware vSphere - Enterprise) and select the 7.0 major version.

Access Custom ISOs: Click the Custom ISOs tab. Locate the entry for the HPE Custom Image for ESXi 7.0U3 and click the download icon.  Key Features of the HPE Customized Image 

Using the HPE-specific ISO is recommended for ProLiant, Synergy, and Superdome Flex servers as it integrates essential drivers and management tools not found in the standard VMware image: 

HPE Management Tools: Includes UEFI platform support, HPE iLO drivers, and the Agentless Management Service (AMS).

Storage & Network Drivers: Integrated drivers for HPE Smart Array and various network controllers required for successful installation on Gen9, Gen10, and Gen11 hardware.

Firmware Support: Includes the HPE Integrated Smart Update Tool (iSUT) to facilitate firmware updates via the iLO repository.  Important Version Notes  VMware ESXi Images for HPE Servers | HPE

HPE Customized ISO image for VMware ESXi 7.0 Update 3 is a specialized installation package that integrates Hewlett Packard Enterprise (HPE) drivers and software agents directly into the standard VMware ESXi installer. These images are essential for ensuring hardware compatibility, optimizing performance on HPE ProLiant and Synergy servers, and enabling advanced management features like the HPE Integrated Smart Update Tool (iSUT) Agentless Management Service (AMS) Finding and Downloading the ISO

Following Broadcom’s acquisition of VMware, the download process has moved from the legacy VMware Customer Connect portal to the Broadcom Support Portal

. Because the new portal architecture does not support direct deep links to specific images, you must manually navigate to the file: Access the Portal : Log in to the Broadcom Support Portal using your registered account credentials. Navigate to Downloads VMware Cloud Foundation from the dropdown menu next to your username and click on My Downloads in the left-hand menu. Search for vSphere : Use the search bar to find VMware vSphere

and select the version you are entitled to (e.g., Enterprise Plus). Filter for Custom ISOs : Under the Custom ISOs tab, look for the HPE Custom Image for ESXi 7.0U3 Install CD Select the Build

: Identify the latest build number. For instance, recent versions include: February 2025 Release VMware-ESXi-7.0.3-24411414-HPE-703.0.0.11.9.0.5-Feb2025.iso September 2024 Release VMware-ESXi-7.0.3-23794027-HPE-703.0.0.11.8.0.4-Sep2024.iso Key Considerations for HPE Servers VMware ESXi Images for HPE Servers | HPE AFRICA

ESXi 7.0 U3—HPE Synergy only Nov 2024. From the Custom ISOs tab, locate and select the HPE Custom Image for ESXi 7.0U3 Install CD. Hewlett Packard Enterprise VMware ESXi Images for HPE Servers

HPE Customized ISO image for VMware ESXi 7.0 Update 3 is a specialized version of the standard ESXi hypervisor, specifically engineered with integrated drivers and management tools for HPE ProLiant and Synergy servers. Since Broadcom's acquisition of VMware, these images are now hosted on the Broadcom Support Portal Broadcom support portal How to Download the HPE Customized ISO

Downloads are no longer available via the legacy VMware Customer Connect site. Follow these steps to access them through Broadcom Support Register/Log In : Create an account on the Broadcom Support Portal and log in with your credentials. Select Product Category : From the dropdown menu next to your username, select VMware Cloud Foundation Search for vSphere My Downloads on the left menu and search for "VMware vSphere". Choose Version : Select your entitlement (e.g., vSphere Enterprise Plus ) and pick version Access Custom ISOs : Click the Custom ISOs tab. Locate the HPE Customized Image for ESXi 7.0U3 Install CD and click download. Broadcom support portal Key Features and Components

The HPE custom image includes value-added software that is not present in the standard VMware base image: Hewlett Packard Enterprise HPE Management Tools : Includes the HPE iLO Driver HPE Agentless Management Service (AMS) for health monitoring, and the SSACLI Utility for storage management. Integrated Drivers

: Contains certified VMware IOVP drivers for HPE network and storage controllers, ensuring high stability and performance. Update Support : Features the HPE Integrated Smart Update Tool (iSUT)

, which allows firmware and drivers to be updated via the iLO Repository. Hewlett Packard Enterprise Compatibility and Prerequisites VMware vSphere® Hypervisor ESXi ISO image - HPE Support

This report covers the current availability status, download locations, critical considerations regarding the HPE/Vmware partnership split, and installation best practices.

How to get the HPE-customized ISO (concise steps)

• Visit HPE’s official support/download site for your server model and locate the “Software and Drivers” section.
• Search for VMware ESXi 7.0 U3 HPE Custom Image (image names often include “HPE Custom Image for VMware ESXi 7.0 U3”).
• Download the ISO matching your architecture (typically x86_64) and check the checksum provided by HPE.
• Optionally, use HPE Service Pack for ProLiant (SPP) or HPE Image Streamer tools if you manage many servers.

Before you download or install

1. Check server model support: Verify your ProLiant/Apollo model is listed in HPE’s compatibility matrix for ESXi 7.0 U3.
2. Backup configurations and VMs: Snapshot or migrate workloads and export host configuration.
3. Review current firmware: Update iLO, BIOS/UEFI, and storage firmware to HPE-recommended versions for 7.0 U3.
4. Check third-party drivers: If you use third-party HBAs/NICs, confirm driver inclusion in the HPE ISO or plan to inject drivers separately.
5. Plan maintenance window: Host reboot required; schedule downtime or vMotion VMs off the host.

📌 Recommended specific version (stable for HPE)

If you see multiple 7.0 U3 ISOs, choose the latest maintenance release of 7.0 U3, for example:

• ESXi 7.0 U3p (build 21930508 or newer) – last solid U3 before 7.0 U3q.

2. Management Integration

With the custom image, you get HPE Addons pre-packaged:

• HPE ESXi Management Agent (hp-smx-provider)
• HPE AMS (Agentless Management Service) – Allows iLO to see the OS health.
• HPE ICMP (Integrated Management Log) – For hardware alerts directly in vCenter.