Usb Device Id Vid 0781 Pid 5567 _verified_

The USB hardware identifiers primarily identify the SanDisk Cruzer Blade USB 2.0 flash drive. DeviceHunt Device Profile: SanDisk Cruzer Blade Manufacturer: SanDisk Corp. (Vendor ID 0781) Cruzer Blade (Product ID 5567) Interface: USB 2.0 (High Speed) Capacities:

Commonly available in 4GB, 8GB, 16GB, 32GB, 64GB, and 128GB variants. Typical Performance: Read Speeds: ~15–35 MB/s. Write Speeds: ~3–10 MB/s. Common Troubleshooting for This ID

If you are searching for this ID because your drive isn't working, here are the most frequent issues reported for this specific hardware: How to Fix Please Insert a Disk into USB Drive

The USB device ID VID 0781 PID 5567 belongs to the SanDisk Cruzer Blade USB 2.0 Flash Drive .

While "Cruzer Blade" is the official model name, it is frequently described as a solid piece because of its compact, "capless" contoured design where the USB connector is integrated directly into the body . Product Details Manufacturer: SanDisk Corp. (VID 0781) Model: SanDisk Cruzer Blade (PID 5567) Interface: USB 2.0 (High Speed)

Common Capacities: Typically found in 4GB, 8GB, 16GB, and 32GB variants Design Characteristics:

Form Factor: Small, lightweight, and "one-piece" (no moving parts or caps to lose) .

Portability: Features a small hook/hole for a lanyard or keychain. Performance and Known Issues

Speed: Users report sequential write speeds ranging from approximately 4.2 MB/s to 7.2 MB/s .

Common Error: This specific hardware ID (VID 0781 PID 5567) is often associated with a "write protected" error on SanDisk community forums, which usually indicates the drive has entered a permanent read-only mode due to a hardware failure . sandisk pendrive problem on disk write is protected

VID = 0781 PID = 5567. In almost all cases, this is a good candidate for an RMA. But check fist if you're eligible. SanDisk Forums

USB Flash Drive Speed Tests - VID = 781, PID = 5567 - NirSoft

SanDisk Cruzer Blade 32GB. Write Speed: 7.24 MB/Sec |. Write Speed: 6.38 MB/Sec 4.21 MB/Sec. Write Speed: 4.94 MB/Sec | Cruzer Blade — USB 0781:5567 - SanDisk Corp. - DeviceHunt

Cruzer Blade — USB 0781:5567. Vendor ID 0781. Quick Reference. Hardware ID. View all 106 devices. DeviceHunt Cruzer Blade — USB 0781:5567 - SanDisk Corp. - DeviceHunt

Cruzer Blade — USB 0781:5567 — DeviceHunt. Home / SanDisk Corp. / 5567. Cruzer Blade. USB USB\VID_0781&PID_5567. DeviceHunt

Troubleshooting Your SanDisk Cruzer Blade: VID 0781 & PID 5567

If you’ve ever dug into your device manager or used a tool like ChipGenius and found the hardware IDs , you’ve likely identified a SanDisk Cruzer Blade

. This compact USB 2.0 drive is a staple for quick file transfers, but it occasionally runs into common "life-cycle" issues that leave users scratching their heads. DeviceHunt usb device id vid 0781 pid 5567

Here is what you need to know about this specific device and how to handle the most common roadblocks. 1. Identifying the Hardware The "VID" (Vendor ID) 0781 is registered to SanDisk Corp . The "PID" (Product ID) 5567 specifically maps to the Cruzer Blade series DeviceHunt Interface: USB 2.0 (High Speed). Capacities: Commonly found in 4GB, 8GB, 16GB, and 32GB variants. Performance:

Typically averages a read speed of ~15–20 MB/s and a write speed of ~4–7 MB/s. 2. The Dreaded "Write Protected" Error

A frequent issue reported for the VID 0781 PID 5567 is the drive suddenly becoming write-protected SanDisk Forums Why it happens:

SanDisk drives are designed to go into a "fail-safe" read-only mode when the internal controller detects a potential hardware failure. This protects your data so you can still copy it off, even if you can't save anything new. Can it be fixed? While users often try

or registry edits, these software fixes rarely work for hardware-level protection. If your drive is locked, your best bet is to check your warranty status and consider an RMA (Return Merchandise Authorization). SanDisk Forums 3. Drivers and Firmware VID = 781, PID = 5567 - USB Flash Drive Speed Tests

Understanding the SanDisk Cruzer Blade (VID 0781 PID 5567) When you see the technical identifier USB Device ID VID 0781 PID 5567, you are looking at one of the most popular entry-level flash drives on the market: the SanDisk Cruzer Blade. These identifiers are not just random numbers; they are the "digital fingerprints" that tell your computer exactly what hardware is being plugged in and which drivers it needs to function. What do these IDs mean?

VID (Vendor ID) 0781: This code is assigned to SanDisk Corp. Every USB device produced by SanDisk will carry this specific vendor prefix.

PID (Product ID) 5567: This specific code identifies the Cruzer Blade model. While SanDisk makes many products, the 5567 PID is most commonly associated with the 8GB, 16GB, and 32GB versions of the Cruzer Blade. Technical Specifications & Performance

The SanDisk Cruzer Blade is a high-speed USB 2.0 mass storage device. While it is compatible with newer USB 3.0 or 3.1 ports, its transfer speeds are capped by the older 2.0 standard.

USB Flash Drive Speed Tests - VID = 781, PID = 5567 - NirSoft

The USB Device ID VID 0781 PID 5567 is the unique hardware identifier for a SanDisk Cruzer Blade Go to product viewer dialog for this item.

USB 2.0 flash drive. In the world of hardware diagnostics, the Vendor ID (VID) 0781 belongs to SanDisk Corp., while the Product ID (PID) 5567 specifically points to the widely-used Cruzer Blade model. Technical Overview of VID 0781 PID 5567

When you plug this device into a computer, the operating system uses these hexadecimal values to identify the hardware and load the appropriate mass-storage drivers. Vendor: SanDisk Corp. (Western Digital brand). Product: Cruzer Blade Interface: USB 2.0 (High Speed). Max Current: 200mA. Device Class: Mass Storage, Bulk-Only Transport. Key Features of the SanDisk Cruzer Blade Cruzer Blade

is a compact, capless USB drive designed for basic file transfers and storage.

Compact Design: It features a lightweight, small form factor that easily fits in a pocket or purse.

Capless Build: The one-piece design eliminates the risk of losing a cap.

SanDisk SecureAccess: This model typically comes preloaded with SanDisk SecureAccess software, which allows users to create a password-protected folder with 128-bit AES encryption. The USB hardware identifiers primarily identify the SanDisk

Performance: It is a USB 2.0 device, meaning it is better suited for documents and music rather than large 4K video files. Typical sequential write speeds are around 6-7 MB/s. Common Troubleshooting and Known Issues

Users searching for this specific ID often encounter two main issues: "Disk is Write Protected" and recognition failures. 1. "Disk is Write Protected" Error This is a frequent complaint on forums for the VID 0781 PID 5567 sandisk pendrive problem on disk write is protected

The USB Device ID VID 0781 PID 5567 identifies a SanDisk Cruzer Blade USB flash drive. Device Identification Vendor ID (VID) 0781: Registered to SanDisk Corp Product ID (PID) 5567: Typically corresponds to the Cruzer Blade model family. Device Class: USB Mass Storage (Class 08, Subclass 06, Protocol 50). Hardware Interface:

Primarily USB 2.0, though some reports show IDs for 3.0/3.2 Gen 1 variants. Performance and Specifications

The USB device ID VID 0781 PID 5567 identifies a SanDisk Cruzer Blade USB flash drive.

Below is an overview of this device’s technical profile and common troubleshooting steps for users encountering issues. Device Profile Manufacturer (VID 0781): SanDisk Corp. Product (PID 5567): Cruzer Blade Flash Drive. Interface: USB 2.0. Typical Capacities: Ranges from 8GB to 128GB.

Physical Features: Capless design with a integrated loop for keychains. Common Issues and Solutions

Users frequently search for this specific hardware ID when facing "Write Protected" or "No Media" errors. 1. Fixing "Write Protected" Errors

If the drive prevents you from adding or deleting files, you can attempt to clear the read-only attribute using DiskPart: Open the Command Prompt as an Administrator. Type diskpart and press Enter.

Type list disk to find your USB's disk number (check by size). Type select disk X (replace X with your drive's number). Type attributes disk clear readonly and press Enter. 2. Resolving "No Media" or "Device Not Recognized"

If the drive appears in Disk Management but says "No Media," or doesn't appear at all:

Check Physical Connection: Try a different USB port directly on the motherboard (avoid hubs).

Change Drive Letter: Open Disk Management, right-click the drive, and select Change Drive Letter and Paths to assign a new letter.

Reinstall Drivers: Open Device Manager, right-click the "USB Mass Storage Device" under Universal Serial Bus controllers, and select Uninstall device. Unplug and replug the drive to trigger a driver reinstall. 3. Verification of Authenticity

SanDisk Cruzer Blades are widely counterfeited. If the drive has significantly less capacity than advertised or fails frequently, verify it via the SanDisk Safe Buying Guide by checking packaging markings and laser-etched serial numbers on the metal connector.

Note: If these software fixes fail, the internal controller may have permanently locked into read-only mode to prevent data loss, which is a common failure state for SanDisk flash memory.

Are you currently facing a specific error message or hardware failure with this SanDisk drive? My sandisk ultra usb 3.0 is write protected what to do? Common issues and troubleshooting

Disable write protection using command line (CMD) * Connect your write protected SD card to your computer. * Right Click on Start. SanDisk Forums Fix Unrecognized USB Device? 12 Solutions (2025) - HP

Based on the USB ID provided (VID: 0781, PID: 5567), this device is identified as a SanDisk Cruzer Glide USB Flash Drive (typically 3.0/3.1 Gen 1).

Here is a prepared review template specifically tailored for this device.

Common issues and troubleshooting

  1. Not detected or intermittent connection

    • Try different USB ports and cables (if using an adapter).
    • Test on another computer or OS to rule out host issues.
    • Inspect the USB connector for damage or debris.

  2. Slow transfer speeds

    • Confirm the host port is USB 2.0 vs USB 3.x; speeds are limited by drive controller and NAND.
    • Reformat to a native filesystem (ex: NTFS or exFAT for large files) — beware this erases data.

  3. Drive shows incorrect capacity or becomes read-only

    • Possible counterfeit or controller failure; verify with tools like H2testw (Windows) or F3 (Linux/macOS).
    • Firmware issues or NAND wear can produce incorrect capacity reports.

  4. Corrupted files or partition

    • Run filesystem repair tools: chkdsk (Windows), fsck (Linux), First Aid in Disk Utility (macOS).
    • If recovery is critical, avoid writing to the drive and use file-recovery software (PhotoRec, Recuva).

  5. Device presents as multiple drives (virtual CD)

    • Some SanDisk drives include a U3 or secure-access partition; use vendor tools to remove or update these if undesired.

Step 2: Uninstall and Reinstall the Driver via Device Manager

This is the most effective software fix.

  1. Open Device Manager (right-click Start button > Device Manager).
  2. Expand Universal Serial Bus controllers or Disk drives.
  3. Look for the device listed as "Unknown Device," "USB Mass Storage Device," or "SanDisk Cruzer."
  4. Right-click the device and select Uninstall device.
  5. In the confirmation dialog, check "Delete the driver software for this device" if available.
  6. Unplug the USB drive.
  7. Restart your computer.
  8. Plug the USB drive back in. Windows will automatically reinstall the generic driver.

How to verify authenticity:

  1. Use tools like:
    • H2testw (Windows)
    • F3 (Fight Flash Fraud) on Linux/Mac
  2. Check physical enclosure – Genuine SanDisk Ultra Fit drives have a textured black and red design.
  3. Purchase from authorized retailers – Avoid marketplaces with third-party sellers.

Technical Context for the User (Cheat Sheet)

If you are posting this to get help, here is the likely information you are looking for, so you can provide extra details if asked:

If you are posting on a Linux forum, include the output of lsusb -v as well.

The hardware identification for VID 0781 PID 5567 refers to a SanDisk Cruzer Blade USB 2.0 flash drive

. This device is a common mass storage unit found in various capacities ranging from 4GB to 32GB or higher. DeviceHunt Device Identification & Specifications Manufacturer: SanDisk Corp. (VID: 0781) Product Model: Cruzer Blade (PID: 5567) Interface: USB 2.0 (High-Speed) Power Consumption: Typically 200 mA Standard Performance:

Users often report "Poor" to "Very Poor" benchmark speeds compared to modern USB 3.0 alternatives, with average read speeds around 23–36 MB/s and write speeds around 3–15 MB/s DeviceHunt Common Issues & Troubleshooting

If you are documenting this ID because the device is malfunctioning, consider the following known scenarios: HP USB Drive Read-Only Bug FIX [Easy & Fast]

1. The "Driver Failed" Error (Rare but possible)

Most modern OSes (Windows 10/11, macOS, Linux) have native drivers for this drive. However, on older systems (Windows 7 or XP), you might see a yellow exclamation mark. In that case, go to SanDisk’s official support site and download the latest drivers for the Ultra Fit series.

3. Device descriptor request failed

This means the USB host controller recognized that something is plugged in, but could not read the device’s VID/PID correctly. This is typically a hardware issue (bad USB port, broken connector, or dead flash drive).