Upgrade Medianav 9.1.3 To 1.0.13.1 [2021] May 2026

Directly upgrading software from Medianav version 9.1.3 to 1.0.13.1 is not possible because they run on different hardware and operating systems. Version 9.1.3 is the final official update for the MediaNav Evolution (MN2) hardware based on Windows CE, while version 1.0.13.1 is for the MediaNav Evolution 3 (MN3) hardware based on Linux. Key Technical Differences MediaNav Evolution (9.1.3) MediaNav Evolution 3 (1.0.13.1) Operating System Windows CE 6.0 Processor RAM Connectivity No native Android Auto/CarPlay Native Android Auto/Apple CarPlay Options for Your System

Official Update: If you are on a version lower than 9.1.3, the latest official firmware for your hardware is 9.1.3. You can update using the official Renault Media Nav Toolbox or Dacia Media Nav Toolbox.

Hardware Replacement: To get version 1.0.13.1 and features like Android Auto, you must physically replace your head unit with an MN3 unit. These units are generally "plug-and-play" with existing harnesses in most Renault/Dacia vehicles.

Third-Party Mods: Custom firmware like Menaco or SuperMod can add extra features (like video players or custom maps) to your existing 9.1.3 system, but they cannot convert the base OS to Linux. Basic Update Procedure (for 9.1.3)

If you just want to ensure your current system is fully updated to its own maximum:

Upgrading a MediaNav device from version 9.1.3 to 1.0.13.1 is not possible via a standard software update because these versions belong to two different hardware generations with incompatible operating systems.

Version 9.1.3 is the final official firmware for MediaNav Evolution (Generation 2), which runs on Windows CE 6.

Version 1.0.13.1 belongs to MediaNav Linux (Generation 3), also known as ULC4 or MediaNav Evolution 2, which runs on a Linux-based system. Hardware Compatibility Breakdown

Because the underlying hardware and processors differ significantly, you cannot "flash" the Linux-based firmware (1.0.x.x) onto the Windows-based hardware (9.x.x). MediaNav Evolution (v5.x - 9.1.3) MediaNav Linux (v1.0.x - 1.0.15.x) Operating System Windows CE 6 Hardware Gen Generation 2 (LG LAN5200 WR2) Generation 3 (LG LAN5800WR0) Connectivity Some support wired CarPlay/Android Auto Native Linux/Android support Display Resistive Touchscreen (standard) Capacitive Multi-touch (improved sensitivity) How to Achieve Modern Features (Android Auto / CarPlay) upgrade medianav 9.1.3 to 1.0.13.1

If your goal for the upgrade is to get Android Auto or Apple CarPlay, you may already have them or can enable them without switching to version 1.0.13.1. Media nav evolution Android Auto | UK Dacia Forum

Part 7: Should You Do It? Final Verdict

Upgrading from Medianav 9.1.3 to 1.0.13.1 is highly recommended for 95% of users. The improvements in stability, speed, and smartphone compatibility are undeniable. It transforms a frustrating, laggy system into a reliable daily driver.

Do not upgrade if:

You have a pre-2014 "Tricolor" Medianav (Hardware 0.x).
Your vehicle is still under a strict warranty that prohibits user firmware updates.
You are uncomfortable with the risk (low but real) of bricking the system.

Pro Tip: Before starting, take a photo of your current system information screen (version 9.1.3). If anything goes wrong, a dealer can use that photo to re-flash your unit, though they may charge a fee.

Part 6: Troubleshooting Common Problems

Even with perfect preparation, issues can arise. Here is how to handle them.

Part 4: The Upgrade Process – 9.1.3 to 1.0.13.1

Perform these steps in your vehicle. Ensure you are in a well-ventilated area, and you will not need to drive during the update.

Start the Engine: Turn your car on and let it idle. This prevents the system from shutting down due to power saving modes. (Do not do this with just the ignition on – the battery may drain). Directly upgrading software from Medianav version 9
Enter System Settings: On your Medianav screen, navigate to:
- Menu → Settings → System → System Information (or Update).
Insert the USB Drive: Plug your prepared USB drive into the vehicle’s USB port (usually located in the glovebox or center console).
Initiate the Update: The system should automatically detect the new firmware. A message will appear: "New version found: 1.0.13.1. Update?"
- Select Yes.
- If nothing appears, go to System Information and manually select Update Software.
Wait (15–25 minutes): The screen will go black, then show a progress bar or a spinning circle.
- Do not touch the USB drive.
- Do not turn off the ignition.
- Do not press any buttons.
- The system may reboot 2–3 times. This is normal.
First Boot: When the update completes, the system will boot into the new interface (black and white/Orange theme). You will see a message: "Update successful. Remove USB."
Remove USB and Reboot: Remove the USB drive. Turn the car off completely, wait 30 seconds, and restart the engine. This final hard reset ensures all new drivers are loaded.

Safety & Risk Assessment

Before proceeding, understand the risks involved in flashing automotive firmware:

Warranty: This process modifies the factory software state. If your vehicle is still under warranty, the dealer may detect the software change and could potentially void claims related to the infotainment system.
Power Stability: The update process can take up to 30 minutes. You must ensure your car battery does not die during the process. A voltage drop during a firmware flash can permanently damage the MediaNav unit. It is highly recommended to keep the engine running or use a battery tender.
Settings Reset: Updating the firmware will reset all your saved radio stations, Bluetooth pairings, and equalizer settings. Be prepared to re-pair your phone and re-tune your radio.

Part 5: Post-Upgrade Checklist

Congratulations, you are now on Medianav 1.0.13.1. However, a few steps are necessary to finalize the process: Part 7: Should You Do It

Factory Reset: Go to Settings → System → Factory Reset. This clears any corrupted cache files from the old 9.1.3 firmware. (You will lose saved radio presets and paired phones – this is expected).
Re-pair Bluetooth: Delete your phone from the car’s memory and your car from your phone’s Bluetooth list. Re-pair fresh.
Update GPS Maps (if applicable): If your unit has navigation, version 1.0.13.1 uses a different map database. You may need to download new maps from the official Renault/Dacia portal.
Test Key Features:
- Play a USB music track for 30 minutes.
- Make a 5-minute Bluetooth call.
- Toggle between radio and aux.

From Fossil to Fluid: Why Upgrading Your Medianav from 9.1.3 to 1.0.13.1 Feels Like Buying a New Car

If you drive a Renault or Dacia from the mid-2010s, you are likely familiar with the quiet frustration of Medianav 9.1.3.

It’s the digital equivalent of a tortoise on tranquilizers. You press the "Nav" button, go make a coffee, and return just as the map finishes stuttering to life. But what if I told you that the same hardware sitting in your dashboard is capable of running a completely different operating system—one that is faster, smoother, and actually usable?

Meet Medianav 1.0.13.1.

Despite the confusing version numbers (9.1.3 sounds newer than 1.0.13.1, right? Wrong), this is not a downgrade. It is a full-blown evolution. Here is why you need to make the switch this weekend.