Before attempting any modifications, ensure the following settings are enabled on your device: USB Debugging: Enabled in Developer Options.
OEM Unlocking: Also referred to as "Factory Unlock" or "Enable OEM Unlock" in Developer Options; if this is not enabled, flashing TWRP will result in a "Failed" error.
Unlocked Bootloader: This is the most critical step and will wipe all user data. Method 1: Fastboot Flashing (Community Verified)
The most common approach found on forums like 4PDA and Pantip involves manual flashing via a PC:
Preparation: Install Huawei USB drivers and set up Minimal ADB and Fastboot on your PC.
TWRP Image: Download the specific TWRP image for the PLE-701L (community members often recommend the version named twrp-ple-701l-a504v2.img). Flashing: Connect the tablet to the PC and run adb reboot bootloader. Verify the bootloader status (should show "unlocked").
Flash the recovery using: fastboot flash recovery [filename].img.
Rooting: Boot into the newly installed TWRP and flash SuperSU v2.76 (or a compatible Magisk version) to gain root. Method 2: Multi-Tool Alternative
Some users successfully utilized the Honor 5X Multi-Tool to flash recovery when general Huawei tools failed.
Note: Users reported that using a recovery image specifically intended for the Honor 5X (such as TWRP_kiwi2) worked on the PLE-701L when flashed through this specialized utility. Important Precautions
Recovery Access: To enter recovery mode after flashing, power off the device, then hold Volume Up + Power. Release Power once the logo appears but keep holding Volume Up.
Compatibility: Be extremely careful to use firmware and recovery images specifically for the PLE-701L model. Using files for the 10-inch version or other variants can lead to boot loops or "erecovery" errors. How to Access Recovery Mode on Huawei Mediapad T5
Rooting and installing TWRP 3.0 on the Huawei MediaPad T2 7.0 Pro (PLE-701L) enables the installation of custom ROMs like LineageOS to bypass performance issues with the stock Android 5.1, requiring an unlocked bootloader. While custom ROMs offer improved responsiveness, specialized recovery images (e.g., twrp-ple-701l-a504v2.img
) are required to avoid device failure. Technical discussions and user experiences are available at Huawei MediaPad T2 7.0 Pro - Обсуждение - 4PDA
2) Прошиваете twrp вместо стокового рекавери fastboot flash recovery twrp-ple-701l-a504v2.img.
MediaPad T2 Pro 10.0 へLineage OS 18.1を導入する - Qiita
Rooting the Huawei MediaPad T2 7.0 Pro (PLE-701L) (Team Win Recovery Project) is a multi-step process that requires unlocking the device's bootloader before flashing custom recovery and rooting files. Rooting Overview
The primary goal is to replace the stock recovery with TWRP 3.0, which then allows you to flash root packages such as 1. Prerequisites Backup Data : Unlocking the bootloader will erase all content on the device. Enable Developer Options
: Go to Settings > About Tablet and tap "Build Number" 7 times. Enable USB Debugging : Found under Developer Options. : Download Minimal ADB and Fastboot on your PC and obtain the specific TWRP 3.0 image for the How to Install TWRP Recovery on Android without Root
This guide outlines the general process for installing TWRP 3.0 and rooting the Huawei MediaPad T2 7.0 Pro (PLE-701L) based on community resources. ⚠️ Disclaimer
Rooting and installing custom recoveries will void your warranty and may brick your device if done incorrectly. Proceed at your own risk. Backup all important data before starting, as unlocking the bootloader will perform a factory reset. 1. Prerequisites
Enable Developer Options: Go to Settings > About Tablet and tap Build Number seven times.
Allow Debugging: In Developer Options, enable USB Debugging and OEM Unlocking.
Drivers & Tools: Install the Huawei HiSuite and ADB/Fastboot tools on your PC.
Unlock Code: You must have your unique 16-digit Bootloader Unlock Code. Note: Huawei has officially stopped providing these, but third-party services like DC-Unlocker are often used by the community. 2. Unlock the Bootloader Connect your tablet to the PC.
Open a command prompt in your ADB folder and type:adb reboot bootloader
Once the device is in Fastboot mode (green robot screen), type:fastboot oem unlock [YOUR_16_DIGIT_CODE] The device will wipe all data and reboot. 3. Install TWRP 3.0 Recovery
Download a compatible TWRP image (e.g., twrp-ple-701l-a504v2.img) and place it in your ADB folder. Boot into Fastboot mode again:adb reboot bootloader
Flash the recovery by typing:fastboot flash recovery [TWRP_FILENAME].img Reboot the tablet:fastboot reboot 4. Rooting the Device
Download the SuperSU v2.76 zip (or a compatible Magisk version) and transfer it to your tablet's internal storage or SD card. Boot into TWRP recovery:adb reboot recovery
In TWRP, tap Install, select the SuperSU/Magisk zip, and swipe to confirm flash. Wipe Dalvik/Cache and then select Reboot System. 5. Verification
Once the tablet reboots, look for the SuperSU or Magisk app in your app drawer. You can also download Root Checker from the Play Store to confirm access. Huawei MediaPad T2 7.0 Pro - Обсуждение - 4PDA
The forum thread read like a map stitched from fragments: “TWRP 3.0 ROOT Huawei MediaPad T2 7.0 Pro PLE-701L — Google.” For Jonah it was less a set of instructions and more a siren call. He’d bought the tablet for cheap at a flea market because the owner swore it “just needed a little love.” The tablet came alive in his hands — a handsome slate with a stubborn lockscreen and a curiosity that would not accept stock.
That night, Jonah cleared his desk, set up two lamps, and spread out cables like ritual tools. He told himself he’d follow the guide step by step: unlock the bootloader, flash TWRP 3.0, push SuperSU, claim root. The words felt like a spellbook. He brewed tea, opened a terminal, and read the thread again for luck.
The first hurdle arrived as a gentle, bureaucratic beast: the bootloader refused to unlock without an authorization code. The thread’s comments offered prayers and a dozen possible workarounds. Jonah picked one marked “tried & true.” He waited while the command prompt ticked at him. The tablet blinked; the bootlogo changed color like a creature settling into a new skin. Progress. He smiled at the tiny victory and told the empty room, “We’re doing this.” TWRP 3.0 ROOT Huawei MediaPad T2 7.0 Pro PLE-701L - Google
Flashing TWRP was a moment of theatre. The tablet’s screen lit with a recovery menu that looked like a different world — blue and clean and dangerous. TWRP 3.0’s logo glowed like a lighthouse. Jonah felt a flinch of fear: this was the line where warranties died and possibility began. He tapped “Install,” selected the zip, and watched the progress bar crawl. Somewhere in the quiet, his neighbor’s late-night jazz filtered through the thin walls like encouragement.
Rooting was less cinematic. It was files moving, permissions changing, tiny confirmations that built into authority. After SuperSU finished, a new app appeared: a small crown icon that seemed too regal for such a modest device. Jonah launched it with the solemnity of someone turning a key. “Grant,” he whispered when asked. The app replied with a beep and a tiny animation, and the tablet hummed like a living thing settling.
Success was not absolute. A few apps balked, misbehaved, or demanded updates that the old hardware could not provide. Jonah spent the next morning pruning and pruning—removing bloatware, tweaking settings, installing a lightweight launcher, and configuring backups that felt almost parental. The tablet, newly granted agency, ran smoother than it had any right to. Jonah installed an emulator to play an old favorite, and for a moment the tiny speakers filled his apartment with the bleeps of a past era.
The story, Jonah realized, was not about hacking a device but about claiming what was ignored. The MediaPad had been discarded into someone else’s “needs work” pile; he gave it new purpose. Each command he typed was a conversation with an object that did not speak but responded. In the end, the tablet was both tool and trophy — a reminder that small, careful acts could coax potential from neglect.
He wrote a short post on the forum: “TWRP 3.0 on PLE-701L — it worked. Steps I used…” He listed what mattered: patience, backups, and the right zip. Replies trickled in like distant applause. A user from another city asked questions; another posted a helpful tip about a quirky driver issue. The thread grew a little brighter.
Weeks later, Jonah found the tablet on his kitchen counter, wallpapered with a photo of a lighthouse sunset he’d taken on a trip. The screen unlocked with a touch that now felt familiar. He smiled, charged the device, and set it beside his mug. Somewhere in the glow of TWRP’s icon and the crown of root, he felt—a small, private victory—like he’d learned to read a language the world thought obsolete.
Outside, a streetlight buzzed. Inside, the MediaPad hummed softly, rooted and reclaimed, ready for whatever odd, useful purpose Jonah would discover next.
The Huawei MediaPad T2 7.0 Pro (PLE-701L) is a 7-inch tablet powered by the Qualcomm Snapdragon 615 (or 616) chipset . Rooting this device with TWRP 3.0 allows users to bypass manufacturer restrictions, install custom ROMs like LineageOS, and perform complete system backups . Essential Requirements and Preparation
Before beginning the rooting process, ensure you have the following tools and settings ready:
Rooting the Huawei MediaPad T2 7.0 Pro (PLE-701L) and installing TWRP 3.0 allows for deep system customization, enabling features like custom ROMs, advanced backups, and root-only applications. Important Prerequisites
Before proceeding, ensure you have completed these steps to avoid bricking your tablet:
Backup Data: Unlocking the bootloader will perform a factory reset, erasing all personal data.
Battery Level: Ensure the device is charged to at least 60%.
Enable Developer Options: Go to Settings > About Tablet and tap Build Number seven times. Then, in Developer Options, enable USB Debugging and OEM Unlocking.
Install PC Tools: Download and install Huawei HiSuite for drivers and Minimal ADB and Fastboot. Step 1: Unlock the Bootloader
Huawei officially stopped providing bootloader unlock codes in 2018. To unlock your PLE-701L today, you may need third-party tools like DC-Unlocker, SigmaKey, or open-source solutions like PotatoNV if your chipset is supported. Connect your tablet to your PC.
Open the ADB command prompt on your PC and type:adb reboot bootloader
Once in Fastboot mode (indicated by a green robot), enter the command:fastboot oem unlock [YOUR_16_DIGIT_CODE] The device will confirm the unlock and reboot. Step 2: Install TWRP 3.0 Custom Recovery
Once the bootloader is unlocked, you can flash the custom recovery image.
Download a compatible TWRP 3.0 image for the PLE-701L (e.g., from community forums like 4PDA) and place it in your ADB folder. Rename the file to twrp.img for simplicity.
Boot your tablet into Fastboot mode again using adb reboot bootloader.
In the PC command prompt, flash the recovery:fastboot flash recovery twrp.img
Reboot into TWRP by holding Volume Up + Power simultaneously while the cable is disconnected. Step 3: Rooting with SuperSU or Magisk
With TWRP installed, you can now flash the root package of your choice. Magisk is generally recommended for its ability to hide root from banking apps.
Unlocking Potential: How to Install TWRP 3.0 and Root Your Huawei MediaPad T2 7.0 Pro (PLE-701L)
The Huawei MediaPad T2 7.0 Pro (PLE-701L) is a solid tablet, but if you want to truly own your hardware, rooting and installing a custom recovery like TWRP 3.0 is the way to go. This opens the door to custom ROMs, advanced backups, and specialized apps that need system-level access. Important Prerequisites
Before you start, ensure you have completed these essential steps:
Backup Your Data: This process will factory reset your device.
Enable Developer Options: Go to Settings > About Tablet and tap Build Number seven times.
Enable USB Debugging & OEM Unlocking: Find these in the new Developer Options menu and toggle them on.
Install Drivers: Download and install Huawei HiSuite and Minimal ADB and Fastboot on your PC. Step 1: Unlock the Bootloader
Huawei no longer provides official unlock codes, but you can still use third-party tools like the DC-Unlocker tutorial or specialized software to obtain your unique code. Connect your tablet to your PC.
Open a command prompt in your ADB folder and type:adb reboot bootloader
Once in fastboot mode (you'll see a green robot), type:fastboot oem unlock [YOUR_16_DIGIT_CODE]. The Flashing Night The forum thread read like
Confirm the unlock on your tablet screen. Your device will restart and factory reset. Step 2: Flash TWRP 3.0 Custom Recovery
A custom recovery like TWRP is essential for flashing root files. Unlocking Huawei Bootloader Guide | PDF | Booting - Scribd
Warning: Rooting and installing custom recoveries like TWRP can potentially brick your device. Make sure to follow the instructions carefully and understand the risks involved.
TWRP 3.0 ROOT Huawei MediaPad T2 7.0 Pro PLE-701L
Requirements:
Step 1: Enable Developer Options and USB Debugging
Step 2: Install ADB and Fastboot Drivers
Step 3: Boot into Fastboot Mode
adb devices to verify that your device is detected.adb reboot bootloader to reboot your device into Fastboot mode.Step 4: Unlock Bootloader (if not already unlocked)
Note: Check if your bootloader is already unlocked by typing fastboot oem getvar unlocked in the command prompt. If it is not unlocked, proceed with caution.
fastboot oem unlock <your_unlock_code> to unlock the bootloader.Step 5: Flash TWRP 3.0 Recovery
twrp-3.0-ple-701l.img).fastboot flash recovery twrp-3.0-ple-701l.img to flash the TWRP recovery image.Step 6: Root Device
fastboot boot twrp-3.0-ple-701l.img.Verify Root and TWRP Installation:
Troubleshooting:
Please confirm if you need any changes or additional information.
To install Huawei MediaPad T2 7.0 Pro (PLE-701L) , you must first have an unlocked bootloader. This process involves flashing a custom recovery image via Fastboot and then installing a rooting package like SuperSU. Prerequisites Unlocked Bootloader
: Essential before any flashing. While Huawei's official unlock portal is often unavailable, tools like DC-Unlocker or third-party unlock tools are commonly used alternatives. : Unlocking the bootloader will erase all data : Download the twrp-ple-701l-a504v2.img UPDATE-SuperSU-v2.76.zip Installation Steps
TWRP 3.0 ROOT Huawei MediaPad T2 7.0 Pro PLE-701L: A Comprehensive Guide
Are you a proud owner of the Huawei MediaPad T2 7.0 Pro PLE-701L and looking to unlock its full potential? Do you want to install custom ROMs, mods, and kernels to give your device a personalized touch? Look no further! In this article, we will guide you through the process of installing TWRP 3.0 and rooting your Huawei MediaPad T2 7.0 Pro PLE-701L.
What is TWRP?
TWRP (Team Win Recovery Project) is a popular open-source recovery software for Android devices. It allows users to install custom ROMs, kernels, and mods, as well as create and restore backups of their device. TWRP 3.0 is the latest version of the software, which offers a user-friendly interface and advanced features.
Why Root Your Huawei MediaPad T2 7.0 Pro PLE-701L?
Rooting your device gives you superuser access, allowing you to modify system files, install custom software, and customize your device to your liking. With root access, you can:
Prerequisites
Before we begin, make sure you have:
Step 1: Unlock the Bootloader
To install TWRP 3.0 and root your device, you need to unlock the bootloader first. The bootloader is a program that loads the operating system into memory. Unlocking it allows you to modify the boot process and install custom software.
To unlock the bootloader, follow these steps:
Step 2: Install TWRP 3.0
Now that the bootloader is unlocked, you can install TWRP 3.0. Follow these steps:
adb reboot bootloaderfastboot flash recovery twrp-3.0-ple-701l.imgStep 3: Root Your Device
With TWRP 3.0 installed, you can now root your device. Follow these steps:
Step 4: Verify Root Access
To verify that your device is rooted, follow these steps: Huawei MediaPad T2 7
Conclusion
Congratulations! You have successfully installed TWRP 3.0 and rooted your Huawei MediaPad T2 7.0 Pro PLE-701L. With TWRP 3.0, you can now install custom ROMs, mods, and kernels to give your device a personalized touch. With root access, you can modify system files, remove bloatware, and use apps that require root access.
Frequently Asked Questions
Q: What is the difference between TWRP and CWM recovery? A: TWRP (Team Win Recovery Project) and CWM (ClockworkMod) recovery are both popular recovery software for Android devices. TWRP is known for its user-friendly interface and advanced features, while CWM is known for its simplicity and stability.
Q: Can I unroot my device if I change my mind? A: Yes, you can unroot your device by flashing the stock firmware or using an app like Universal Unroot.
Q: Is rooting my device safe? A: Rooting your device can void your warranty and potentially brick your device if done incorrectly. However, with proper guidance and precautions, rooting can be a safe and rewarding experience.
Disclaimer
The author and this website are not responsible for any damage or issues that may arise from rooting your device. Proceed with caution and at your own risk.
This guide outlines the process for unlocking the bootloader, installing TWRP 3.0, and rooting the Huawei MediaPad T2 7.0 Pro (PLE-701L). ⚠️ Important Precautions
Data Loss: Unlocking the bootloader wipes all data from your tablet.
Security: Rooting may void your warranty and can make your device more vulnerable to security risks.
Requirements: You will need a Windows PC, a high-quality USB cable, and the ADB/Fastboot tools installed. Step 1: Unlock the Bootloader
Huawei no longer provides unlock codes directly through their official site. You may need third-party services like DC-Unlocker to retrieve your 16-digit unlock code.
Enable Developer Options: Go to Settings > About Phone and tap "Build Number" 7 times.
Enable Settings: In Settings > Developer Options, toggle on USB Debugging and OEM Unlocking.
Boot to Fastboot: Connect your tablet to your PC. Open a command prompt in your ADB folder and type:adb reboot bootloader.
Unlock Command: Once in Fastboot mode (showing a green robot), type:fastboot oem unlock [YOUR_16_DIGIT_CODE].The tablet will factory reset and reboot. Step 2: Install TWRP 3.0 Custom Recovery
Download TWRP: Obtain the specific TWRP image for the PLE-701L (often named twrp-ple-701l-a504v2.img) and place it in your ADB folder.
Enter Fastboot Mode: Re-connect to your PC and run:adb reboot bootloader.
Flash Recovery: Run the following command:fastboot flash recovery twrp-ple-701l-a504v2.img.
Boot into TWRP: Power off the device, then hold Volume Up + Power simultaneously until the TWRP screen appears. Step 3: Root via SuperSU or Magisk
Download Root File: Download the SuperSU zip (e.g., version 2.76) or the latest Magisk zip and transfer it to your tablet's internal storage or SD card. Install in TWRP: In the TWRP main menu, tap Install. Locate and select your root .zip file. Swipe to confirm Flash.
Reboot: Once finished, select Reboot System. Your device should now be rooted.
To verify, you can download a "Root Checker" app from the Google Play Store.
| File | Purpose | Source / Note |
|------|---------|----------------|
| TWRP_3.0.2_PLE.img | Custom recovery | Unofficial build from XDA (developer: surdu_petru or OldDroid) |
| UPDATE-SuperSU-v2.82.zip | Root management | Chainfire’s final stable release for Android 5.x–6.x |
| no-verity-opt-encrypt-5.1.zip | Disable dm-verity & forced encryption | Optional, only if boot loops after rooting |
| ADB & Fastboot | Platform tools | Version 1.4.3 or newer |
| Huawei USB drivers | Windows connectivity | Official HiSuite drivers or manual .inf |
Checksums (example – verify yours):
MD5: 9a3f2c1b...SHA1: 9e8d7c6b...With the twrp_3.0.2_ple701l.img in his fastboot folder, Alex ran:
fastboot flash recovery twrp_3.0.2_ple701l.img
The terminal said:
target reported max download size of 268435456 bytes
sending 'recovery' (14564 KB)...
OKAY [ 0.468s]
writing 'recovery'...
OKAY [ 0.312s]
finished. total time: 0.780s
Success? He disconnected and held Power + Volume Up. The Huawei logo flickered… and then… Team Win Recovery Project 3.0.2-0 appeared. The dark blue theme. The swipe to unlock. It was alive.
But TWRP was old. It couldn’t decrypt Android’s default file encryption. The internal storage showed only gibberish folder names. Alex panicked until he remembered the no-verity-opt-encrypt.zip. He had placed it on an external microSD card beforehand. Good thinking.
Posted by: AndroidTech Labs | Category: Rooting & Recovery
If you are holding a Huawei MediaPad T2 7.0 Pro (Model: PLE-701L) and feel that it has been left behind by software updates, you are not alone. This 7-inch tablet launched with Android 5.1 Lollipop and was never officially graced with Marshmallow or Nougat in most regions. However, thanks to the custom development community, you can breathe new life into this device by installing a custom recovery and gaining full system privileges.
In this 2,500+ word guide, we will focus exclusively on the combination of TWRP 3.0 (Team Win Recovery Project) and Root access for the Huawei MediaPad T2 7.0 Pro PLE-701L. We will also address the critical "Google" aspect—ensuring your Google Play Services and apps continue to function after rooting.
Warning: Rooting and installing custom recovery will void your warranty, wipe your user data, and permanently trigger the "Rooted" flag on Huawei’s board software. Proceed at your own risk.
Device: Huawei MediaPad T2 7.0 Pro
Model: PLE-701L (Wi-Fi + LTE variant)
Android Version: Stock Lollipop 5.1.1 (EMUI 3.1) – Note: This device did not receive official Marshmallow or higher.
Bootloader Status: Must be unlocked (Huawei no longer provides unlock codes; legacy methods or paid services may be required).