Thomson Bluetooth Digital Alarm Clock Radio (Model BTC-2138)
is a versatile bedside companion designed for clear visibility and wireless audio streaming. It features a distinctive red LED display specifically chosen to avoid impairing night vision. Grays Auction Core Features & Specifications Wireless Connectivity : Equipped with Bluetooth V2.1
, allowing you to stream music wirelessly from your smartphone or tablet. Dual Alarm System : Features AL1 and AL2
settings, making it ideal for couples or individuals with multiple wake-up times. Digital Display 0.9" (2.3cm) Red LED display
with adjustable brightness (dimmer function) for comfortable nighttime viewing. FM Radio Tuner : Built-in PLL FM tuner with a pig-tail antenna and memory for up to 20 station presets USB Charging Port : Includes a (charge-only) to power your mobile devices overnight. Audio Output : Delivers total power through its integrated speaker. Backup Power 2 x AA batteries
(not included) to maintain time and alarm settings during power outages. Grays Auction Operational Guide (Manual Instructions)
While specific button layouts vary by model, Thomson digital clock radios typically follow these standard procedures for setup: Setting the Time Ensure the unit is in Standby mode Press and hold the Time Set / Memory button until the display flashes. (or Forward/Reverse) buttons to adjust the time. again to confirm. Setting the Alarm In standby mode, press and hold the When the digits flash, use the buttons to set your wake-up time.
Select your alarm source (Radio, Buzzer, or Bluetooth) if the model supports it. button again to save. Using Bluetooth Source/Mode button to switch to Bluetooth mode.
Enable Bluetooth on your device and select "Thomson BTC2138" (or similar) to pair.
Once connected, you can control playback through your device or the clock's top-mounted controls. Snooze & Sleep Functions : Press the Snooze/Dimmer
button during an active alarm to silence it for approximately 9 minutes. Sleep Timer : While playing music/radio, press the
button repeatedly to select a countdown (e.g., 90, 60, 30 minutes) after which the unit will turn off. eBay Australia troubleshooting steps for pairing issues or instructions on how to store FM radio presets
The Westclock Model 71036 Alarm Clock Instructions Setup And Review
The Thomson BTC2138 is a Bluetooth FM clock radio that features a large LED display, dual alarms, and USB charging capabilities. While the exact full manual for the
is often packaged with the device, it shares a standardized interface with other Thomson models like the CR50. Quick Setup Guide
Power On: Plug the DC adapter into the back of the unit and a wall outlet.
Backup Power: Insert 2 x AA batteries (not included) into the bottom compartment to maintain settings during power outages.
Antenna: Fully extend the FM wire antenna located at the back for clear radio reception. Clock & Alarm Functions
To adjust these settings, the device must be in Standby Mode (powered on but not playing music). Set Time:
Long-press the TIME SET / MEMORY button until the display blinks.
Use the HOUR button to set the hour and the MINUTE button for minutes. Press TIME SET again to confirm. Set Alarms (1 or 2):
Long-press the ALARM 1 (or ALARM 2) button until the time flashes. Use the HOUR and MINUTE buttons to set your wake-up time.
Press the ALARM button again to choose your wake-up source: Radio (frequency shows) or Buzzer ("bU" shows).
Toggle Alarm ON/OFF: Short-press the ALARM button; a light on the display indicates if the alarm is active. Bluetooth & Audio Bluetooth Pairing: Press the SOURCE
or POWER button to switch to Bluetooth mode (the display typically shows "bt" or a flashing Bluetooth icon). On your phone/tablet, search for or Thomson in the Bluetooth settings and select it to pair.
FM Radio: Use the SCAN or FORWARD/REVERSE buttons to find stations. You can save up to 20 presets using the MEMORY button.
Sleep Timer: Press the SLEEP button repeatedly to choose a countdown (90, 60, 30, etc. minutes) before the radio turns off automatically. Display & Charging
Dimmer: Use the SNOOZE / DIMMER button to toggle between High, Low, or Off brightness levels.
USB Port: The USB port on the back is for charging only; it does not play music from USB sticks.
This model is designed as an all-in-one bedside hub with the following highlights:
0.35W RMS speaker with Bluetooth V2.1 for wireless music streaming. PLL FM tuner with 20 programmable station presets. 0.9-inch red LED display with a Hi/Lo dimmer for night use.
Dual alarm settings with wake-to-buzzer or wake-to-radio options. Convenience:
Built-in white night light and a USB port for charging mobile devices. thomson bluetooth digital alarm clock radio btc2138 manual
AC adapter with a battery backup slot (2 x AA batteries, not included) to maintain settings during power outages. Grays Auction Operating Instructions 1. Setting the Clock Time Ensure the device is in Standby Mode (radio off). Press and hold the TIME SET / MEMORY button until the display digits begin to blink. HOUR / REVERSE button to adjust the hour and the MINUTE / FORWARD button to set the minutes.
button again or wait for the blinking to stop to save the time. 2. Configuring the Dual Alarms You can set two independent alarms (AL1 and AL2). In standby mode, long-press the button until the time blinks. Use the buttons to adjust your wake-up time. Toggle Alarm: Short-press the
button to turn the alarm on or off. An indicator light next to the alarm number will confirm it is active. Wake Source:
Most models allow you to cycle through the alarm mode (Buzzer vs. Radio) by repeatedly pressing the alarm button. 3. Using Bluetooth & Radio Bluetooth Pairing:
Switch the mode to Bluetooth. Search for "BTC-2138" on your smartphone or tablet to pair and stream music wirelessly. STANDBY/ON button to turn on the radio. Use the buttons to tune into frequencies. To save a station, tune to your frequency and long-press . To cycle through saved stations (P01–P20), press the 4. Night Light & Dimmer Snooze/Dimmer:
The top button serves as both a snooze (delaying the alarm for 9 minutes) and a dimmer to adjust the LED brightness between High and Low. Night Light:
Activate the integrated white night light using its dedicated control button for subtle bedside illumination. Grays Auction Maintenance and Troubleshooting Battery Backup:
Always keep two fresh AA batteries in the compartment to avoid resetting your clock and alarms after every power flicker. Radio Reception:
Fully extend the pigtail FM antenna and reposition it if you experience static. The USB port is for charging only ; it does not support music playback from thumb drives. Grays Auction or tips on optimizing FM radio reception THOMSON CR50 Alarm Clock Radio Instruction Manual
The Thomson BTC-2138 is a Bluetooth-enabled digital alarm clock radio designed for bedside use, featuring a compact design and a clear red LED display. Key Features
Audio Streaming: Equipped with Bluetooth V2.1 for wireless music streaming from compatible devices.
FM Radio: Includes a PLL FM tuner with 20 station preset memory.
Dual Alarms: Features two independent alarm settings (AL1 and AL2).
Wake Options: You can choose to wake up to a buzzer or the radio.
Device Charging: Includes a USB charging port specifically for charging mobile devices while they sit on your bedside.
Display Features: A 0.9" (2.3cm) red LED display with a Hi/Lo dimmer to adjust brightness for night use.
Sleep & Snooze: Integrated sleep timer and snooze functions for controlled rest.
Night Light: Includes a built-in white night light function. Specifications Speaker Output: 0.35W RMS.
Power: Operated via an external AC power adaptor (DC input jack).
Battery Backup: Requires 2 x AA batteries (not included) to maintain time and alarm settings during power outages. Time Format: Offers 12-hour or 24-hour display options.
While a full digital manual is not always hosted as a single PDF on standard repositories, retailers like Grays and secondary marketplaces often provide these full technical specs for the Thomson BTC-2138.
Based on the Thomson BTC-2138 Bluetooth Digital Clock Radio , here are the core features and instructions on how to use a primary one. Key Features Bluetooth Wireless Streaming : Pair your phone to use the clock as a bedside speaker Grays Auction Dual Alarms
: Set two separate wake-up times (AL1 and AL2), ideal for different weekday/weekend schedules or for couples eBay Australia USB Charging Port
: Charge your mobile devices directly from the back of the unit while you sleep Grays Auction FM Radio with 20 Presets : Save up to 20 of your favourite stations for quick access Grays Auction Adjustable Dimmer
: Switch between High and Low brightness on the 0.9-inch red LED display to avoid sleep disruption Grays Auction Night Light Function : Includes a soft white night light built into the unit Grays Auction Sleep and Snooze
: Auto-off timer (Sleep) and a standard Snooze button for extra rest Grays Auction How to Use the Dual Alarm Feature
Setting the dual alarms (AL1 or AL2) allows you to choose between a buzzer or the radio for your wake-up call Grays Auction Enter Setting Mode : When the device is in standby mode, long-press button. The time display will begin to blink Adjust the Time : While the display is blinking, press the HOUR / REVERSE button to set the hour and the MINUTE / FORWARD button to set the minutes Confirm and Choose Mode : Press the
button again to save the time. You can then toggle between waking up to the Grays Auction Check Status
: A light next to the "Alarm 1" or "Alarm 2" label on the display indicates the alarm is active Snooze/Stop : Press the button to pause the alarm for 9 minutes, or the STANDBY/OFF button to stop it until the next day device.report steps or saving your FM radio presets Thomson Bluetooth Digital Clock Radio – Model BTC-2138
The Thomson BTC2138 is a versatile Bluetooth digital alarm clock radio designed for bedside convenience. It combines traditional FM radio and dual alarm functionality with modern Bluetooth streaming and USB charging. Key Features and Specifications
Display: 0.9" (2.3cm) red LED display with adjustable brightness.
Connectivity: Bluetooth V2.1 for wireless streaming, 3.5mm AUX input, and a USB port for charging devices. Radio: PLL FM tuner with up to 20 station presets. Thomson Bluetooth Digital Alarm Clock Radio (Model BTC-2138)
Alarms: Dual alarm system (AL1/AL2) with wake-to-buzzer or wake-to-radio options.
Backup: Requires 2 x AA batteries for time and alarm memory during power outages. Operating Instructions 1. Setting the Clock Time
Ensure the device is in Standby Mode (connected to power but the radio is off).
Press and hold the TIME SET / MEMORY button until the display flashes.
Use the HOUR / REVERSE button to adjust the hour and the MINUTE / FORWARD button to adjust the minutes. Press the TIME SET button again to confirm. 2. Setting the Alarms (AL1 & AL2)
In Standby Mode, press the ALARM 1 or ALARM 2 button to toggle the alarm on or off (indicated by a light on the display).
To set the time, long-press the respective ALARM button until the digits blink. Adjust the time using the HOUR and MINUTE buttons. Press the ALARM button once more to save.
Snooze: When the alarm sounds, tap the SNOOZE / DIMMER button to silence it for 9 minutes. 3. Bluetooth Pairing
Press the MODE or STANDBY button to turn the unit on and switch to Bluetooth Mode.
The indicator light will flash rapidly while searching for a connection.
Enable Bluetooth on your smartphone or tablet and select "BTC-2138" from the available devices.
Once paired, the indicator light will flash slowly or remain steady, and you can stream audio directly to the clock’s speakers. 4. Using the FM Radio Press the MODE button until you reach FM mode.
Manual Tuning: Use the FORWARD and REVERSE buttons to find a frequency.
Auto Scan: Long-press the PLAY/SCAN button to automatically search and save stations.
Presets: To save a station, press MEMORY, select a preset number (P01–P20) using the arrows, and press MEMORY again to confirm. 5. Additional Functions
USB Charging: Plug a standard USB cable into the rear port to charge mobile devices while the clock is connected to AC power.
Sleep Timer: Press the SLEEP SET button repeatedly to choose a countdown (90, 60, 30, 15, 10, or 5 minutes) after which the radio will turn off automatically.
Dimmer: Use the SNOOZE / DIMMER button while the radio is off to cycle through display brightness levels. Troubleshooting Tips
No Power: Ensure the DC input jack is firmly connected and the AC outlet is functioning.
Weak Radio Reception: Uncoil the pig-tail FM antenna completely for better signal.
Bluetooth Connection Failure: Ensure your device is within 10 meters and is not already connected to another speaker.
For further assistance, check the official Thomson support site or digital libraries like Manuals+ or Manua.ls.
The Thomson BTC2138 Bluetooth Digital Alarm Clock Radio is a versatile bedside companion designed for both modern connectivity and classic utility. This compact device combines a high-quality FM tuner with Bluetooth streaming, allowing you to wake up to your favorite radio station or your own curated playlists. Key Specifications & Features
The BTC2138 is built for efficiency and ease of use, featuring a small footprint that fits easily on nightstands.
Display: 0.9-inch (2.3cm) Red LED for high visibility in low-light conditions.
Connectivity: Bluetooth V2.1 for wireless audio streaming and a USB port for charging mobile devices.
Radio: PLL FM tuner with 20 station presets for quick access. Audio Output: Single speaker with 0.35W RMS total power.
Power: AC power via an external adapter with a backup slot for 2 x AA batteries to maintain settings during power outages. Manual & Operating Instructions
Setting up your Thomson BTC2138 involves a few standard steps for time, alarm, and connectivity. Setting the Time Ensure the device is in Standby Mode.
Press and hold the Time Set / Memory button until the display begins to flash.
Use the Hour and Minute buttons (often labeled as Prev/Next or Reverse/Forward) to adjust to the current time. Press the Time Set button again to confirm and save. Programming Alarms
The BTC2138 typically features dual alarms (AL1 and AL2) to accommodate different wake-up schedules. You have frequent power outages (no alarm backup)
Set Alarm Time: Long press the AL1 or AL2 button while in standby. When the time flashes, use the hour/minute buttons to set your wake time.
Select Wake Mode: After setting the time, press the alarm button repeatedly to toggle between Buzzer or Radio modes.
Snooze/Dimmer: When the alarm sounds, tap the Snooze button for a 9-minute delay. Bluetooth Pairing Thomson Bluetooth FM Clock Radio with USB Charging
This detailed guide for the Thomson BTC2138 Bluetooth Digital Alarm Clock Radio covers everything from the initial setup to maximizing its modern features like USB charging and wireless streaming.
Master Your Morning: The Ultimate Guide to the Thomson BTC2138
The Thomson BTC2138 is more than just a clock; it's a multi-functional bedside companion featuring a 0.9-inch red LED display, dual alarms, and Bluetooth connectivity. Whether you've lost your manual or just bought a pre-owned unit, this guide covers every essential function. 1. Getting Started: Initial Setup
Before diving into the features, ensure your clock is powered correctly.
Power Source: Connect the external AC power adaptor to a wall outlet and the DC input jack on the back of the device.
Battery Backup: For peace of mind during power outages, insert 2 x AA batteries (not included) into the bottom compartment. This keeps your time and alarm settings saved even if the power fails. 2. Setting the Time
If the display is flashing "0:00" after plugging it in, follow these steps: Ensure the device is in Standby Mode (radio/Bluetooth off).
Long press the TIME SET / MEMORY button until the display begins to blink. Use the HOUR / REVERSE button to adjust the hours. Use the MINUTE / FORWARD button to adjust the minutes.
Press the TIME SET button once more to confirm, or wait a few seconds for the display to stop blinking. 3. Setting Dual Alarms (AL1 & AL2)
The BTC2138 allows for two separate wake-up times, perfect for couples or different weekday/weekend schedules.
To Set Alarm 1: In standby mode, long press the ALARM 1 button until the time flashes. Adjust the time using the Hour and Minute buttons.
To Select Wake-Up Mode: Repeatedly press the ALARM button to toggle between waking up to the Buzzer or the FM Radio. A corresponding light on the display will indicate which alarm is active.
Snooze & Dimmer: When the alarm sounds, tap the SNOOZE / DIMMER button to silence it for 9 minutes. You can also use this button during normal operation to adjust the display brightness between High and Low. 4. Bluetooth Pairing & Audio
One of the BTC2138's best features is its ability to act as a wireless speaker. Turn on the unit and switch the mode to Bluetooth.
The BT indicator will likely flash, signaling it is in pairing mode.
On your phone or tablet, go to Bluetooth settings and select "BTC-2138" from the list of available devices.
Once connected, you can stream music or podcasts directly through the 0.35W RMS speaker. 5. FM Radio and Presets
Scanning: Use the Forward/Reverse buttons to find your favorite stations.
Saving Presets: The BTC2138 can store up to 20 FM stations. To save a station, press the TIME SET / MEMORY button while in FM mode and use the PRESET button to assign it a slot (P01–P20).
Sleep Timer: Use the SLEEP SET button to fall asleep to the radio. You can set the timer to automatically turn off after 90, 60, 30, 15, 10, or 5 minutes. 6. Bonus Features: USB Charging & Night Light
USB Charging: The built-in USB port is designed for charging only. Plug in your smartphone's charging cable to power up your device overnight.
Night Light: If you need a little extra visibility in the dark, look for the dedicated Night Light function, which provides a soft white glow.
Are you having trouble with a specific feature, like the Bluetooth connection or the FM signal? THOMSON CR50 Alarm Clock Radio Instruction Manual
5V/1A (5W) is what iPhones used in 2012. A modern smartphone plugged in while using GPS or video will discharge faster than this charges.
Tips:
Connect the DC power adapter to the unit and plug into an AC outlet. The display will light.
Set the time:
Adjust display brightness:
The Thomson BTC2138 is a compact digital alarm clock with: