To install TWRP 2.7.0.1 on your Samsung Galaxy Tab 3 Lite (SM-T110), you will need a Windows PC and the specific .tar.md5 file you mentioned. This version of TWRP is widely used for this specific tablet model to enable custom ROM installations and root access . Prerequisites
Samsung USB Drivers: Installed on your computer so Odin can recognize the tablet.
Odin Flash Tool: Use a stable version like Odin v3.09 or v3.10 .
Recovery File: Ensure you have t110.twrp.2.7.0.1.tar.md5 downloaded. Battery: At least 50% charge.
Backup: Flashing custom recovery shouldn't wipe data, but backing up important files is highly recommended. Installation Steps Prepare the Tablet (Download Mode) Power off your SM-T110 completely.
Press and hold Volume Down + Home + Power buttons simultaneously until a "Warning" screen appears .
Press Volume Up to confirm and enter Download Mode (you will see an Android robot icon) . Configure Odin on PC Launch the Odin executable on your computer. Connect your tablet to the PC via a USB cable.
Check the ID:COM box in Odin; it should turn blue or yellow, indicating a successful connection .
Click the AP (or PDA in older versions) button and select your t110.twrp.2.7.0.1.tar.md5 file . Flash the Recovery t110.twrp.2.7.0.1.tar.md5
In Odin's "Options" tab, ensure only "Auto Reboot" and "F. Reset Time" are checked. Click Start. The process usually takes less than a minute.
Once finished, Odin will show a green "PASS!" or "RESET" message . Boot into TWRP The device will automatically reboot.
To verify, power off the tablet and hold Volume Up + Home + Power to enter your new TWRP recovery .
How to Install TWRP Recovery on Any Samsung Device (2026 Guide)
Installing t110.twrp.2.7.0.1.tar.md5 allows users of the Samsung Galaxy Tab 3 Lite (SM-T110) to replace the stock recovery with TWRP (Team Win Recovery Project), enabling advanced tasks like creating full backups, flashing custom ROMs, or rooting the device. Prerequisites Before starting, ensure the following are prepared: A Windows PC: Required to run the Odin flashing tool.
Samsung USB Drivers: Install official drivers on your PC so it recognizes the tablet. Odin3 Tool: Download a reliable version of Odin3.
TWRP File: Ensure you have the t110.twrp.2.7.0.1.tar.md5 file specifically for the SM-T110 model.
Battery Charge: Ensure your tablet has at least 50% battery to prevent shutdown during the process. Step-by-Step Installation Guide To install TWRP 2
Enable Developer Options: Go to Settings > About Tablet and tap Build Number seven times until "Developer mode has been enabled" appears.
Enable USB Debugging: In Settings > Developer Options, toggle on USB Debugging and OEM Unlock (if available). Enter Download Mode: Power off the tablet completely.
Press and hold Power + Home + Volume Down simultaneously until a warning screen appears. Press Volume Up to confirm and enter Download Mode. Configure Odin on PC: Open Odin3.exe as an Administrator.
Connect the tablet to the PC via USB. Odin should show a blue or yellow box under ID:COM, indicating a successful connection.
Click the AP (or PDA) button and select the t110.twrp.2.7.0.1.tar.md5 file.
Crucial Step: In the "Options" tab, uncheck Auto Reboot. This prevents the tablet from automatically restarting and potentially overwriting TWRP with the stock recovery. Flash the Recovery:
Click Start. Wait for the process to finish; it should show a green PASS! message. Boot into TWRP:
Manually power off the device (hold Power + Volume Down if necessary). Immediately press and hold Power + Home + Volume Up. t110 : This is the device codename
Release the Power button when the Samsung logo appears but keep holding Home + Volume Up until the TWRP recovery screen is visible. Next Steps
Once TWRP is installed, you can use the Install menu to flash a SuperSU or Magisk zip file to root your device, or navigate to Backup to create a "Nandroid" backup of your current system. Samsung Galaxy Tab 3 TWRP recovery and root
The filename follows a specific naming convention that identifies exactly what the file is and what device it is for:
t110: This is the device codename. It corresponds to the Samsung Galaxy Tab 3 7.0 (WiFi only). The 3G version is the T111, and the LTE version is the T113. This file will not work on any other device.twrp: Stands for Team Win Recovery Project. It is a custom recovery environment that replaces the stock Android recovery provided by Samsung.2.7.0.1: This is the version number of the recovery. This is an older version of TWRP (released around 2014).tar: Indicates that this is an archive file (often required by the Odin flashing tool).md5: This extension indicates that the file contains a checksum. Samsung’s flashing tool (Odin) uses this to verify that the file was not corrupted during download before it attempts to flash it to the tablet.This file is used to "flash" a custom recovery onto the tablet. Once installed, TWRP replaces the minimal stock recovery (which usually only shows a dead Android robot when something goes wrong).
With TWRP installed, users can:
The prefix t110 refers to the Samsung Galaxy Tab 3 Lite (Wi-Fi only), model number SM-T110.
Because Samsung devices from this era used Exynos or Marvell PXA986 chipsets (not Qualcomm), they required a special flashing method via Odin — which is why the .tar.md5 format is used.