Studio 5000 Logix Designer V35: Release Notes & Key Features
Rockwell Automation released Studio 5000 Logix Designer Version 35 in late 2022, introducing significant productivity enhancements, expanded hardware support, and advanced virtualization capabilities. This release focuses heavily on process industry requirements and motion simulation. Key Features and Enhancements
Virtual Motion Support (Axis-Test Mode): A highly requested feature that allows developers to test motion applications for Kinetix, PowerFlex, and iTRAK devices without physical hardware. It works in conjunction with FactoryTalk Logix Echo V2 to virtualize motor and drive behavior during design.
Embedded Process Instructions: V35 adds three new instructions directly into the software to streamline PlantPAx applications: PD4SD: Process Discrete 2-, 3-, or 4-State Device. PNPOS: Process n-Position Device. PVLVMP: Process Mix Proof Valve.
SequenceManager Expansion: Added support for 5x80P (Process) controllers, allowing them to utilize advanced sequencing functionality.
User Scripting (SDK): For the first time, Studio 5000 offers a publicly available SDK that allows users to write C++ script commands to automate repetitive tasks within the Logix Designer environment.
Modernized UI: Updated device configuration with a web-based Add-On Profile (AOP) interface to provide a more consistent experience across different Rockwell software platforms. Hardware and System Requirements
To run Studio 5000 V35 effectively, your system should meet the following Product Compatibility & Download Center (PCDC) specifications: Characteristic Recommended Processor Intel Core 2 Duo (2.8 GHz) Intel Core i5 (2.4 GHz) RAM 8 GB Hard Disk Space 16 GB free 20 GB free Operating System Windows 10 v1703 or later Windows 10/11 Professional
Note: For communication, you must use FactoryTalk Linx 6.31 or later to support V35 firmware. Important Anomalies and Workarounds Release Note - Rockwell Automation Compatibility
Rockwell Automation's Studio 5000 Logix Designer V35 focuses on expanding hardware support for 1756-L8z and GuardLogix 5580 controllers, enhancing motion control for Kinetix 5100 drives, and strengthening CIP security. The update also streamlines workflows with an improved user interface, faster cross-referencing, and updated PlantPAx instructions for the FactoryTalk ecosystem. You can find the release notes and downloads on the Rockwell Automation Product Compatibility & Download Center (PCDC).
Studio 5000 V35 Release Notes
Introduction
The Studio 5000 software suite, part of the Rockwell Automation Integrated Architecture, provides a comprehensive development environment for designing, testing, and deploying industrial automation applications. Studio 5000 V35 is a major release that includes new features, enhancements, and bug fixes. These release notes provide an overview of the changes and updates in this version.
What's New in Studio 5000 V35
The following new features and enhancements are included in Studio 5000 V35:
Enhancements
The following enhancements have been made to existing features in Studio 5000 V35:
Bug Fixes
The following bugs have been fixed in Studio 5000 V35:
Known Issues
The following known issues exist in Studio 5000 V35:
System Requirements
The following system requirements apply to Studio 5000 V35:
Installation Instructions
To install Studio 5000 V35, follow these steps:
Conclusion
Studio 5000 V35 is a comprehensive release that provides new features, enhancements, and bug fixes. These release notes provide an overview of the changes and updates in this version. Refer to the Studio 5000 user manual and online help for more information on using the software. If you have any questions or need assistance, contact Rockwell Automation technical support.
Studio 5000 Logix Designer V35 focuses on virtualization and process industry streamlining, introducing Axis Test Mode for simulating motion without physical hardware. Key updates include expanded SequenceManager support for 5x80P controllers, new embedded Process Instructions for PlantPAx, and a new SDK for automating tasks via C++ scripting. For full technical details and release notes, visit Rockwell Automation Product Compatibility & Download Center Studio 5000 – V35: What's New - The Automation Blog
What’s New in Studio 5000 Logix Designer V35 Rockwell Automation has officially released Studio 5000 Logix Designer V35
, bringing significant productivity boosts to process and motion applications. This update focuses on expanding hardware support and introducing long-requested virtualization features that streamline system design and testing. New Process Instructions & Features Studio 5000 V35 Release Notes
V35 introduces several powerful instructions and features specifically for the process industry:
Embedded Process Instructions: Three new instructions—PD4SD (Process Discrete 2-, 3-, or 4-State Device), PNPOS (Process n-Position Device), and PVLVMP (Process Mix Proof Valve)—are now embedded to align with PlantPAx.
SequenceManager Expansion: Now supports ControlLogix 5580P controllers, allowing process applications to use the same proven sequencing functionality across the latest hardware.
Two-Argument Arctangent (ATAN2): A new math instruction that computes the arc tangent of two sources and returns the result in radians. Motion & Virtualization Highlights
One of the most anticipated features in this release is the ability to test systems without physical hardware:
Axis-Test Mode: You can now virtualize motion for Kinetix, PowerFlex, and iTRAK 5730 CIP Motion devices. This feature supports both physical controllers and emulated controllers via FactoryTalk Logix Echo V2.
User Scripting Utility (SDK): V35 introduces the first publicly available user scripting utility, allowing you to write C++ script commands to automate repetitive tasks within the Logix Designer environment. Expanded Hardware & Compatibility
V35 broadens the scope of supported equipment and improves the user interface:
Supported Hardware: Includes new support for FLEXHA 5000 I/O (extended redundancy), GuardLink, and enhancements for the 1756-EN4TR.
Modern UI for Device Profiles: Add-On Profiles (AOP) now feature a modern web-based interface, providing a common configuration experience across Rockwell's software platforms.
64-bit Data Types: New predefined data types like USINT, UINT, UDINT, ULINT, LINT, and REAL improve precision for 5380, 5480, and 5580 controllers. System Requirements
To ensure optimal performance, your workstation should meet these minimums: Studio 5000 v35 system requirements
Studio 5000 V35 Release Notes: A Comprehensive Review
Rockwell Automation has recently released Studio 5000 V35, the latest version of their integrated development environment (IDE) for Allen-Bradley programmable logic controllers (PLCs). This new release brings a range of exciting features, enhancements, and improvements that aim to streamline the development process, improve productivity, and provide a more intuitive user experience. In this article, we will dive into the details of the Studio 5000 V35 release notes, exploring the key updates, new features, and benefits that this version has to offer.
Overview of Studio 5000
Before we dive into the release notes, let's take a brief look at Studio 5000. This software is a comprehensive development environment that allows engineers and programmers to design, configure, and program Allen-Bradley PLCs. Studio 5000 provides a single platform for developing and testing PLC code, HMI applications, and motion control projects. With its intuitive interface and powerful features, Studio 5000 has become the go-to choice for industrial automation professionals.
Studio 5000 V35 Release Notes
The Studio 5000 V35 release notes highlight several key updates and enhancements. Some of the most notable changes include:
Key Features of Studio 5000 V35
In addition to the updates mentioned in the release notes, Studio 5000 V35 also includes several other key features that make it a powerful and versatile development environment. Some of these features include:
Benefits of Upgrading to Studio 5000 V35
Upgrading to Studio 5000 V35 offers several benefits for industrial automation professionals. Some of the most significant advantages include:
Conclusion
The Studio 5000 V35 release notes highlight a range of exciting updates and enhancements that make this version a significant improvement over its predecessors. With its improved user interface, enhanced project management, and new PLC programming features, Studio 5000 V35 is an essential tool for industrial automation professionals. Whether you're a seasoned developer or just starting out, Studio 5000 V35 provides a comprehensive and intuitive development environment that can help you complete projects more efficiently and effectively. If you're interested in learning more about Studio 5000 V35 or would like to schedule a demo, contact Rockwell Automation or an authorized distributor today.
Frequently Asked Questions (FAQs)
Q: What are the system requirements for Studio 5000 V35? A: The system requirements for Studio 5000 V35 include a 64-bit Windows operating system, 8 GB of RAM, and a 2.4 GHz processor.
Q: Can I upgrade from an earlier version of Studio 5000 to V35? A: Yes, it is possible to upgrade from earlier versions of Studio 5000 to V35. However, it's recommended that you consult the Rockwell Automation documentation and support resources for guidance on the upgrade process.
Q: What are the benefits of using Studio 5000 V35 for PLC programming? A: The benefits of using Studio 5000 V35 for PLC programming include improved productivity, increased efficiency, and enhanced security. The new features and enhancements in V35 make it easier to develop, test, and deploy PLC code.
Q: Does Studio 5000 V35 support the latest Allen-Bradley PLC families? A: Yes, Studio 5000 V35 supports the latest Allen-Bradley PLC families, including the CompactLogix and ControlLogix series. Studio 5000 Logix Designer V35: Release Notes &
Q: How can I get started with Studio 5000 V35? A: To get started with Studio 5000 V35, you can download a free trial version from the Rockwell Automation website or contact an authorized distributor for more information. Rockwell Automation also provides comprehensive documentation, tutorials, and technical support to help you get started with Studio 5000 V35.
Studio 5000 V35 Release Notes
Introduction
Studio 5000 is a comprehensive software solution for the design, operation, and maintenance of integrated control and information systems. The latest release, Studio 5000 V35, offers a range of new features, enhancements, and improvements to help users optimize their control and automation projects. This document provides a detailed overview of the new features, changes, and known issues in Studio 5000 V35.
New Features
Enhancements and Changes
Known Issues
System Requirements
Upgrade and Installation Instructions
Conclusion
Studio 5000 V35 offers a range of new features, enhancements, and improvements to help users optimize their control and automation projects. The latest release provides enhanced security, improved performance, and new controller support, among other features. Users should review the known issues and system requirements before upgrading to ensure a smooth transition. Rockwell Automation recommends that users upgrade to Studio 5000 V35 to take advantage of the latest features and improvements.
Rockwell Automation's Studio 5000 Logix Designer version 35 (v35) advances industrial automation by expanding hardware support for FLEXHA 5000 I/O and GuardLink, alongside enhancing Process Control with SequenceManager for 5x80P controllers. The release focuses on improved controller change detection for security, modernized web-based Add-On Profiles (AOPs), and specialized instructions, while requiring 64-bit systems with 8GB RAM. For the full release details, visit Rockwell Automation. Release Note - Rockwell Automation
Studio 5000 Logix Designer V35 enhances process control with Axis Test Mode, expanded SequenceManager for 5x80P controllers, and embedded process instructions. This update, supporting Windows 10/11 and Server 2022, also introduces web-based Add-On Profiles and supports new FLEXHA 5000 I/O. For the full technical details, visit Rockwell Automation PCDC Rockwell Automation Release Note - Rockwell Automation
Studio 5000 V35, released in late 2022, serves as a significant milestone in Rockwell Automation’s shift toward virtualization and process integration. This version focuses on three pillars: hardware expansion, process efficiency, and digital engineering. Key Feature Enhancements
Axis Test Mode: Perhaps the most notable addition, this feature allows users to simulate motion control (Kinetix, PowerFlex, and iTRAK devices) without physical hardware. This is compatible with both physical controllers and emulated ones via FactoryTalk Logix Echo.
Embedded Process Instructions: Three key instructions previously found in the PlantPAx library are now natively embedded: P_SD: Process Discrete 2-, 3-, or 4-State Device. P_nPOS: Process n-Position Device. P_valveMP: Process Mix Proof Valve.
Logix Designer SDK: V35 introduces the first public scripting utility, allowing developers to use C++ to automate repetitive tasks like opening, saving, and downloading projects.
Expanded SequenceManager Support: Functionality is extended to include 5x80P process controllers, streamlining batch process management.
Modern Add-On Profiles (AOPs): A new web-based user interface for device profiles provides a more modern and responsive configuration experience. System Requirements
V35 is strictly a 64-bit application and does not support 32-bit operating systems. Release Note - Rockwell Automation Compatibility
Studio 5000 Logix Designer Version 35.00 focuses on expanding hardware support for process industries, enhancing motion virtualization, and introducing modern web-based device configuration tools. Key New Features
Expanded Process Hardware Support: Includes SequenceManager expansion for 5x80P controllers, bringing process-specific functionality to the latest controller technology.
Axis-Test Mode: Allows for virtualized motion testing for Kinetix, PowerFlex, and iTRAK 5730 CIP Motion devices without physical hardware. It works with physical controllers or emulated ones via FactoryTalk Logix Echo.
New Process Instructions: Three new embedded instructions—P_SD (Discrete Device), P_nPOS (n-Position Device), and P_valveMP (Mix Proof Valve)—to streamline PlantPAx programming.
Web-Based Add-On Profiles (AOP): Updated device profiles now use a modern, web-based interface for a consistent configuration experience across platforms.
Logix Designer SDK: Alignment with a new SDK allows users to write C++ scripts to automate repetitive tasks within the Designer environment. System Improvements
Controller Change Detection: Expanded support for ControlLogix 5580 controllers to better track project changes.
I/O Tree Enhancements: Ability to cut, copy, and paste multiple devices simultaneously to reduce manual editing time. Editor Shortcuts: New navigation shortcuts (
) added to Sequential Function Chart (SFC) and Function Block Diagram (FBD) editors. Hardware Requirements RSLogix/Studio 5000: Windows 11 Compatibility Improved Performance : Studio 5000 V35 provides improved
Studio 5000 View Designer versions 9.01 and higher are compatible with Windows 11 Professional or Enterprise Edition. Rockwell Automation
( 9324-RLDx ) Studio 5000 programming software. ... - Release Note
Studio 5000 Logix Designer version 35.00, released in November 2022, focuses on expanding hardware support, including FLEXHA 5000 I/O and the 1756-EN4TR, alongside introducing Axis Test Mode and expanded SequenceManager capabilities. The update also enhances user experience through modernized Add-On Profiles (AOP) and adds official Windows 11 support. For full technical details, visit Rockwell Automation. Release Note - Rockwell Automation Compatibility
Studio 5000 Logix Designer Version 35 enhances industrial automation by expanding support for Flex5000 and Compact 5000 I/O while improving logic engine performance for high-speed motion. The update advances digital transformation through refined Sequence Manager capabilities, enhanced Logix Echo emulation, and strengthened CIP Security for granular device authentication. For details, refer to Rockwell Automation.
Rockwell addressed over 120 customer-reported defects. The most impactful fixes:
| ID | Description | Impact Area | |----|-------------|--------------| | COR-7524 | Online edits in a routine containing 500+ rungs caused 5-second freeze. | Ladder Editor | | AOI-1893 | Parameters of nested AOIs lost their default values after import/export. | Add-On Instructions | | SEC-3321 | FactoryTalk Linx crashed when enumerating 50+ CIP Security devices. | Security | | TREE-4012 | Deleting a produced tag while a consumer was online caused controller watchdog fault. | Produced/Consumed | | UDT-267 | Adding a new member to a UDT at index 0 corrupted existing array tags. | Data Types |
Critical Fix: The PCDC (Programmatically Created Data Context) memory leak present in V34.02–V34.04 has been patched. Users with long-running applications (e.g., web handling) reported memory creep of 2MB/hour; this is resolved.
Issue: After installation, FactoryTalk Activation Manager fails to detect licenses stored in a network server.
FTActResetTool.exe) with admin rights.Issue: On non-English Windows (e.g., German, Japanese), the Compare Tool shows truncated text in side panels.
Newly Supported Hardware (Requires FW 35.011):
Discontinued Hardware Support (No longer recognized in V35):
Date of summary: March 23, 2026.
Studio 5000 Logix Designer® version 35.00 release focuses heavily on expanded hardware support, enhanced security, and improved workflow integration. Key Features & Enhancements Hardware Support : Includes support for the new GuardLogix® 5580 controllers and expanded FLEX 5000™ I/O modules. Process Instructions : Introduction of new instructions for the PlantPAx® 5.0
system, improving native integration for process applications. Security Upgrades : Enhanced CIP Security™
capabilities, including support for more granular policy configurations and improved certificate management. Axis Test Mode
: A new feature allowing users to test motion axes without a physical motor connected, simplifying virtual commissioning. Integrated Motion : Support for Kinetix® 5100
on EtherNet/IP™ providing more flexibility for low-to-mid power applications. Important Considerations Operating System : V35 is optimized for Windows 10 (64-bit) and Windows 11 Firmware Compatibility
: Ensure your controller firmware matches the major revision (35.xxx) to enable all software features. FactoryTalk® Services : Requires FactoryTalk Services Platform v6.30 or later for full functionality. Installation Notes Co-existence
: V35 can be installed alongside previous versions of Studio 5000, but only one version can be active for a specific controller project at a time. : Ensure your FactoryTalk Activation
Studio 5000 V35 Release Notes
Introduction Rockwell Automation is pleased to announce the general availability of Studio 5000 Logix Designer software version 35. This release focuses heavily on enhancing integration with the Logix platform, improving CIP Security implementations, and expanding the capabilities of specific controller types, such as the ControlLogix 5580 and CompactLogix 5380 controllers.
Key New Features and Enhancements
CIP Security Enhancements Version 35 significantly advances the security capabilities within the Logix architecture. Users can now configure and manage CIP Security policies directly within the Studio 5000 environment. This includes improvements in how controllers handle CIP Security authority, making it easier to restrict unauthorized access to controller data and configuration.
Controller Firmware Compatibility Studio 5000 V35 introduces full support for firmware version 35 for the ControlLogix 5580 and CompactLogix 5380 controllers. This update ensures that users can leverage the latest processor features, including increased connection capacities and improved system overhead handling.
Motion Enhancements This release provides updates to the motion toolset. Improvements have been made to the coordination of axes and the execution of motion instructions, allowing for smoother integration of complex motion control applications.
Add-On Profile (AOP) Updates Several new and updated Add-On Profiles are included in this release to support the latest hardware modules from Rockwell Automation. This ensures seamless integration and configuration of third-party and Rockwell devices within the I/O tree.
Redundancy Support For applications requiring high availability, Studio 5000 V35 offers enhanced support for ControlLogix redundancy systems. This includes updates to the synchronization mechanisms required for redundancy pairs operating on firmware version 35.
Resolved Issues This release addresses several customer-reported issues and known anomalies from previous versions. Key fixes include improvements to:
System Requirements To ensure optimal performance, the following minimum system requirements are recommended for Studio 5000 V35:
Installation Instructions Users can install Studio 5000 V35 alongside existing versions of the software, allowing for multi-version support. It is recommended to back up existing project files before opening them in the new version. Please note that once a project is upgraded to version 35, it cannot be reverted to a previous firmware version without restoring from a backup.
Conclusion Studio 5000 V35 represents a continued commitment by Rockwell Automation to provide a secure, reliable, and feature-rich environment for industrial automation. Users are encouraged to review the full technical documentation provided with the installation media for a comprehensive list of all changes and resolved anomalies.