It seems you are looking for a piece of information (document, summary, or regulatory text) regarding "SRPS EN 13670."
Here is the concise breakdown of what this standard is:
SRPS EN 13670 is the Serbian adoption of the European standard EN 13670:2009.
Full Title: Execution of concrete structures
What it covers:
Key point regarding "piece": If you need the actual text (the legal/technical piece of documentation), you must purchase it from the Institute for Standardization of Serbia (ISS). It is not freely available due to copyright.
Relation to other standards:
If you meant a specific piece of text from the standard (e.g., a clause on tolerances or curing), please clarify which clause number you need.
One of the most important concepts in the standard is the Execution Class (EXC 1, EXC 2, or EXC 3). The class is determined by: srps en 13670
| Execution Class | Typical Applications | Required Level of Quality Control | |----------------|----------------------|-----------------------------------| | EXC 1 | Simple structures, low-risk (small houses, agricultural sheds) | Basic control, minimal testing | | EXC 2 | Common buildings and bridges (most standard projects) | Normal control, defined testing frequency | | EXC 3 | Complex, high-risk structures (nuclear facilities, high-rise, long-span bridges) | Strict control, third-party inspection, detailed documentation |
The project designer must specify the EXC. If not specified, EXC 2 is assumed by default.
SRPS EN 13670 is more than just an ISO number—it is the operational "bible" for any concrete construction project in Serbia. It bridges the gap between architectural vision (design) and on-the-ground reality (execution). For Serbian contractors, adopting this standard reduces disputes, improves structural durability, and increases eligibility for international tenders. For clients and supervisors, it provides a clear, legally defensible benchmark for acceptance.
Whether you are starting a small residential slab or a massive hydroelectric dam, your first step toward success is opening the blue-covered document: SRPS EN 13670.
Disclaimer: This article is for informational purposes. Always refer to the official Institute for Standardization of Serbia (ISS) publication for legal compliance.
SRPS EN 13670:2012 is the Serbian national adoption of the European standard EN 13670, which provides universal requirements for the execution of concrete structures. This guide summarizes its scope, key technical sections, and the primary responsibilities it places on designers and constructors. 1. Scope and Application
This standard applies to the construction of both permanent and temporary concrete structures.
In-Situ & Precast: Covers both cast-on-site works and the assembly of prefabricated elements. It seems you are looking for a piece
Excluded Areas: It does not cover concrete production/conformity (covered by SRPS EN 206), health and safety regulations, or contractual responsibilities.
Innovative Materials: Additional requirements are needed if using lightweight concrete, fibers, or special innovative designs. 2. Core Technical Sections
The standard is organized into practical areas that serve as a checklist for ensuring structural safety and serviceability:
Execution Management: Defines the documentation required, including the Execution Specification, Quality Plan, and detailed execution records.
Falsework and Formwork: Requirements for design, installation, release agents, and the timing of formwork removal.
Reinforcement: Rules for handling, bending, and placing reinforcing steel.
Prestressing: Specific procedures for tensioning tendons and grouting.
Concreting Operations: Guidelines for the placement, compaction, and curing of concrete to ensure durability. Key point regarding "piece": If you need the
Geometrical Tolerances: Specifies the allowable deviations to ensure the structure meets its intended design. 3. Key Functions
The standard serves three primary roles in a construction project:
Transfer of Design: Acts as a link to communicate the designer's requirements to the constructor.
Technical Standard: Provides a set of standardized technical requirements for any concrete work contract.
Checklist: Helps designers ensure they provide all necessary technical information to the builder. 4. Implementation Details
Current Status: The Serbian version (SRPS EN 13670:2012) is an active, published standard available through the Institute for Standardization of Serbia (ISS). Language: Available in both Serbian and English.
Execution Classes: Projects must specify an "Execution Class" which dictates the level of inspection and quality management required during construction. SRPS EN 13670:2012
SRPS EN 13670 is the Serbian adoption of the European Standard EN 13670:2009, titled "Execution of concrete structures." The acronym "SRPS" stands for Srpski standard (Serbian Standard), indicating that this European standard has been fully accepted and translated into the national standards system of Serbia.
Essentially, this standard specifies the requirements for the execution of concrete structures. It covers everything from the delivery of fresh concrete to the final finished structure, including formwork, reinforcement, concrete placement, compaction, curing, and geometrical tolerances.