Satlink Ws-6933 Software Update //free\\ May 2026

Updating the software on your Satlink WS-6933 is essential for maintaining accurate satellite transponder lists and ensuring compatibility with modern DVB-S2 signals. This guide outlines the preparation, tools, and step-by-step process required for a successful firmware update. Preparation and Requirements Before starting, ensure you have the following items ready:

Hardware: A Windows-based PC and the USB cable provided with your device.

Firmware File: The latest .bin file, which can be found on official Satlink support pages or through regional partners.

Update Tool: You will typically need the Flash Loader or Satlink Tools software to facilitate the transfer.

Battery Check: Ensure the meter is fully charged or connected to its 12V DC adapter to prevent power failure during the process. Step-by-Step Update Process Install Drivers & Software:

Install the necessary drivers so your PC recognizes the Satlink device.

Verify the connection in your PC’s Device Manager under "Ports (COM & LPT)". Enter Download Mode: Power off the device.

Hold down the Return/Back button while turning the device on. The screen should remain black, but the Power light will illuminate, indicating it is in "Download Mode". Configure the Update Tool: Open the Flash Loader software on your PC. satlink ws-6933 software update

Select the correct COM port identified in your Device Manager.

Choose the "Download to Device" option and browse for the .bin firmware file you downloaded. Execute the Flash:

Click "Next" to begin the transfer. Do not disconnect the cable or turn off the device until the progress reach 100%.

Once complete, the device may restart automatically or prompt you to click "Finish". Verification: Power the Satlink on normally.

Navigate to System Setup in the menu to check the SW Version and confirm it matches the new firmware version. Benefits of Updating

To update the software (firmware) on your Satlink WS-6933 Go to product viewer dialog for this item.

, you will need to use a PC to transfer the update file via USB. This process typically resets the device, meaning you will need to re-upload your satellite and transponder (TP) lists afterward. Prerequisites Updating the software on your Satlink WS-6933 is

USB Cable: A standard cable to connect the meter to your computer.

Drivers: Ensure you have the Satlink USB drivers installed so your PC recognizes the device in the Device Manager under "Ports (COM & LPT)".

Software Tools: You will need the Flash Loader program for firmware updates and SAT Editor if you also plan to update TP lists.

Firmware File: A compatible .bin update file (e.g., version 10.2 or later). Step-by-Step Update Process

Enter Download Mode: Turn off the device. While holding the Return button, flip the power switch to ON. The screen should remain black, but the power light will stay lit. Connect to PC: Plug the

into your computer via USB and verify which COM Port it is assigned to in your computer's Device Manager. Run Flash Loader:

Open the Flash Loader software and select the correct COM Port. Choose the "Download to Device" option. Part 1: What Does a Satlink WS-6933 Software Update Fix

Browse for your firmware file (ensure the file extension is .bin).

Execute Update: Click "Next" to begin. Wait for the progress bar to reach 100%. Do not disconnect the cable during this time.

Finalize: Once complete, turn the device off and back on. You can verify the new version in the System Setup menu.

Watch these step-by-step video guides to see how to install the drivers, enter download mode, and use the Flash Loader software correctly: How to Update Satlink 6933 TP List and Software (2025) 7K views · 7 months ago YouTube · TassTech