WAIT! Before you leave...
To reset your Canon PIXMA G2010 printer, you can use a manual button sequence to enter Service Mode and clear waste ink counter errors like
. While official Canon support typically recommends visiting a service centre
, many users successfully use these "resetter" steps at home. ij.manual.canon How to Manually Reset Canon G2010
Follow these steps carefully to clear the "Ink Absorber Full" error: Enter Service Mode Turn off the printer (keep it plugged in). Press and hold the While holding Stop, press and hold the Release the button (keep holding Power). (some models may require 6 times). Release the button. Wait for the green light to stay solid. Execute the Reset Once the green light is stable, press the
to confirm. The printer will process and may print a page showing a reset counter ("D=000.0").
Turn off the printer and turn it back on. The error should be gone. Alternative Reset Methods WIC Reset Utility
: A third-party software that can reset the waste ink counter with a purchased "Reset Key" via Canon Service Tool : Technical software like
or newer versions can be used on Windows to manage deep system resets, though these are not officially distributed for consumer use. wic-reset.com
: Resetting the software does not physically clean the ink pads. It is highly recommended to eventually replace the waste ink absorber pads to prevent actual ink leakage inside your machine. the ink absorber pads for this model?
Introduction
The Canon G2010 is an inkjet printer designed for home and small office use. It is known for its affordable price, compact design, and decent print quality. However, like any other printer, it can encounter issues, one of which is the need for a resetter.
What is a Resetter?
A resetter is a tool or software used to reset a printer's internal counters, which track the number of pages printed, ink levels, and other maintenance-related parameters. When a printer's counters reach a certain threshold, it may stop functioning or display error messages, even if the printer is still in good working condition. A resetter helps to bypass these counters and restore the printer to its default settings.
Why is a Resetter Needed for Canon G2010?
The Canon G2010 printer uses a Continuous Ink Supply System (CISS), which allows users to refill the ink tanks instead of replacing them. However, the printer's internal counters still track the number of pages printed and estimate the ink levels. When the counters reach a certain threshold, the printer may:
In such cases, a resetter is needed to reset the counters and restore the printer's functionality.
Types of Resetters for Canon G2010
There are two types of resetters available for the Canon G2010: resetter printer canon g2010
How to Use a Resetter for Canon G2010
The steps to use a resetter for the Canon G2010 vary depending on the type of resetter:
Software Resetter:
Hardware Resetter:
Precautions and Risks
Using a resetter for the Canon G2010 can pose some risks:
Conclusion
In conclusion, a resetter for the Canon G2010 printer is a useful tool to restore the printer's functionality when it encounters issues related to internal counters. However, users should exercise caution when using a resetter, as it may void the warranty or cause damage to the printer. It is essential to follow the instructions carefully and ensure that the resetter is compatible with the printer model.
Recommendations
Additional Resources
For more information on resetters and printer maintenance, you can visit:
Canon PIXMA G2010 , "resetting" typically refers to clearing the Waste Ink Pad Counter (Error Code
), which occurs when the printer's internal absorbers are theoretically full. How to Reset the Waste Ink Counter (Manual Method)
You can often reset the counter without external software by putting the printer into Service Mode Enter Service Mode Turn off the printer. Press and hold the While holding Power, press the button (triangle icon)
Release the Power button. Wait for the green light to stop flashing and stay steady. Reset the Counter
button once to confirm. The printer should print a page showing , indicating a successful reset to 0%.
: Turn the printer off, then back on to resume normal operation. Factory Reset (Settings Initialization) To reset your Canon PIXMA G2010 printer, you
If you just want to reset all internal settings to factory defaults: Ensure the printer is on and the LCD shows "1". button (pliers/screwdriver icon). button repeatedly until " " appears on the LCD. Press either the button to initialize. ij.manual.canon Third-Party Resetter Tools
If manual steps fail, professional service tools are available, though they may require a paid "Reset Key": WIC Reset Utility
: A popular software used to read and reset waste ink counters. You can download it from WIC Reset Connect Canon Service Tool (V5105 or newer)
: Official-style adjustment software often found on technician forums or sites like wic-reset.com
To reset a Canon G2010 printer, you can either perform a manual hardware reset
to clear waste ink counter errors (like 5B00 or P07) or use the on-device menu to initialize general settings. Manual Reset (Service Mode)
This method is used to fix the "Waste Ink Pad Full" error (5B00 or P07) without needing external software. Enter Service Mode Ensure the printer is turned off but connected to power. Press and hold the While holding Power, press the
Release both buttons. The green power light will flash and then stay steady. Reset the Waste Ink Counter Once in Service Mode (steady green light), press the to confirm the command.
The printer will process the reset and may print a page showing a "D" value of , indicating the counter is cleared. Exit Service Mode button to turn the printer off. Turn the printer back on; the error should be gone. Factory Reset (Device Settings) Use this for general connection or configuration issues. LCD Button Method Ensure the printer is on.
button (pliers/screwdriver icon) until "1" appears on the LCD. button repeatedly until the letter Press either the button to initialize all settings. Menu Navigation (if applicable) Device settings Reset settings Verification & Troubleshooting Check Counter Status : In Service Mode, you can press Stop 3 times Power once
to print the EROM data. The "D" value shows the current waste ink percentage. WIC Reset Utility : If manual steps fail, third-party software like the WIC Reset Utility
can be used, though it typically requires purchasing a "Reset Key". clean the print heads
if you are still experiencing print quality issues after the reset? AI responses may include mistakes. Learn more
To reset your Canon PIXMA G2010 printer, you generally need to put it into Service Mode first. This is typically done to fix common errors like 5B00 or P07, which indicate a full waste ink absorber counter. Method 1: Manual Service Mode Reset
This sequence is often used to clear error codes and allow the printer to communicate with a reset utility:
Turn off the printer, but leave it plugged into the power source. Press and hold the Stop/Reset button (triangle icon).
While holding the Stop button, press and hold the Power button. Stop printing or display error messages (e
Release the Stop button while still holding the Power button down.
Press the Stop button 5 times (for some models, try 6 times if 5 doesn't work). Release the Power button.
Wait for the green power light to stop flashing and stay steady. The printer is now in Service Mode. Method 2: Resetting After Ink Refills
If you have just refilled the ink tanks and the printer isn't updating the levels, follow these official Canon Manual steps: Press the Setup button (pliers/screwdriver icon). Press the Black or Color button for more than 5 seconds.
The ink icon should turn off, and the remaining ink count will be reset. Method 3: Resetting via Software (WIC Reset)
For persistent "Waste Ink Pad" errors that manual buttons won't clear, you may need a reset utility:
Download Utility: Tools like WIC Reset Utility can reset the internal counter.
Process: You typically need a "Reset Key" (often a paid service) to clear the error permanently after entering Service Mode. Important Troubleshooting Tips How to Reset Canon Printers Waste Ink Counter
A resetter (sometimes called a "service tool" or "WIC resetter") is a small software program that communicates directly with your printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). It forces the waste ink counter back to zero.
To perform this reset, you need:
Before you run any software resetter, you must address the physical issue. The "Waste Ink Absorber" is a physical pad inside the printer that soaks up ink used during cleaning cycles.
If you reset the counter without cleaning or replacing the pads:
Recommendation: If you are handy with electronics, open the printer side panel, remove the felt pads, wash them thoroughly with warm water and soap, dry them completely, and reinstall them. If you aren't comfortable doing this, take the printer to a service center after performing the reset to prevent a mess.
Resetting the Canon G2010 requires specific tools and software, as the process cannot be completed through the standard printer driver or on-printer menu.
The resetter printer Canon G2010 is an invaluable tool that can extend the life of your printer by months or even years. When used correctly—after physically cleaning the waste ink pads—it saves you from expensive service center bills.
However, treating the resetter as a permanent fix without addressing the physical waste ink will destroy your printer. The best long-term strategy is to install an external waste ink tank modification and then use the resetter freely.
Remember: If your Canon G2010 shows the ink absorber full error, do not panic. Download a reputable resetter, prepare your printer in service mode, and reset the counter. But always, always give those waste pads the attention they deserve.
Disclaimer: This guide is for educational purposes only. Modifying your printer may void its warranty. The author is not responsible for any hardware damage resulting from the misuse of resetter tools. Always back up your printer settings before performing a reset.
No. Resetting is a maintenance procedure, not a hack. However, there is a physical reality: If the real pad is truly full, resetting without cleaning can cause ink to leak inside your printer, destroying electronics. We will cover this in the safety section below.