Digital MicroEnterprise
Book a Call

Resetear Impresora Canon G2110 Verified -

The rain in Bogotá was not just falling; it was plotting against the pedestrians. Inside the cramped cybercafé on the corner of Avenida Jiménez, the atmosphere was humid and thick with the smell of instant coffee and ozone.

Marcos stared at the Canon G2110 as if it were a bomb that had just ticked its final second. The printer was mocking him. Its power light was blinking a rhythmic, hateful green-seven-times-followed-by-orange. The "Ink Absorber Full" error.

"I have a line of customers, Marcos," Doña Luisa said, tapping her watch. She was holding a stack of invoices that needed to be printed three minutes ago. "The client is waiting for the contract."

"It’s the sponge, Luisa," Marcos muttered, flipping open the top cover. "The counter says the waste ink pad is full. The printer thinks it’s going to drown in its own ink. It’s locked itself."

"Can you fix it or not?"

Marcos didn't answer. He was the tech guy, the fixer. But he knew the truth: Canon’s G-series were tanks, but their software was a fortress. You couldn't just press a button. You needed the key.

He sat down at the service terminal, an old tower PC that whirred like a jet engine. His fingers flew across the keyboard.

Step 1: The Connection. He grabbed the USB cable—a thick, shielded one, not the cheap dollar-store junk that caused half the errors in this city. He plugged it into the back of the G2110. The computer chimed. Ding-dong.

Step 2: The Protocol. "Service Tool 4720," Marcos whispered. It was the standard, but sometimes it failed. Sometimes it bricked the machine. He opened the software. The interface was utilitarian, grey, and looked like it had been designed in Windows 95.

He navigated to the specific requirement for the G-series. He didn't want to mess with the firmware. He just needed to reset the counter. resetear impresora canon g2110 verified

He checked the forums on his phone. There was a thread he’d bookmarked months ago titled simply: "Resetear impresora canon g2110 verified."

"Verified," he said to himself. "That’s what I need."

The instructions were precise. He couldn't just click randomly.

  1. Enter Service Mode. Marcos walked back to the printer. He disconnected the power cord. He held down the Resume button (the triangle inside the circle) and reconnected the power cord. Breathe. While holding Resume, he pressed the Power button. He held them both for five seconds. The green light lit up solid. He released the Resume button, then pressed it five times quickly. Click. Click. Click. Click. Click. He released the Power button. The printer blinked, then the green light glowed steady.

    "Service mode engaged," Marcos whispered. The printer was now deaf to standard commands, waiting for a master signal.

Step 3: The Reset. He ran back to the PC. The Service Tool had detected the printer. The USB port ID showed up in the drop-down menu.

This was the moment of truth. In the "Ink Absorber Counter" section, the numbers were high—too high. It read 108%.

He checked the "Resetear impresora canon g2110 verified" guide one last time. Select 'Main' and 'Platen'. He clicked the Main checkbox. He clicked the Platen checkbox. He hovered the mouse over the "Set" button.

"Do it," Luisa called out. "The client is calling my phone!" The rain in Bogotá was not just falling;

Marcos clicked Set.

The printer whirred. The carriage slid violently from right to left. The gears ground together for a second—a sound that made Marcos wince—but then, silence. The software progress bar filled up green.

Step 4: Verification. The tool popped up a message: A value was written successfully. But Marcos knew better. Software lied. He closed the tool, grabbed the power cord, and pulled it. He waited ten seconds.

"Come on, baby," he whispered.

He plugged it back in and pressed the Power button.

The printer came to life. It performed its startup cycle—the loud clicking and clacking of the printhead moving. It stopped. The screen didn't show an error code. It didn't blink orange.

It just sat there. Green light. Solid.

"Test print," Marcos said, grabbing the stack of invoices from Luisa’s desk. He fed a sheet into the tray and hit the print command on the PC.

The G2110 grabbed the paper aggressively. It zipped through the mechanism, and seconds later, a perfectly crisp invoice slid into the output tray. Enter Service Mode

Marcos wiped the sweat from his forehead with the back of his hand.

"Is it done?" Luisa asked, appearing over his shoulder.

"Counter reset to zero," Marcos said, grabbing his screwdriver to close the casing he had loosened earlier. "The sponge isn't actually dry, Luisa. We bought time, maybe six months. Then we actually have to wash it."

"Six months is a lifetime

3. How many times can I reset the printer?

You can reset it multiple times, but physically, the waste pad can only absorb so much ink. After 3-4 resets, you must clean or replace the pads.

⚠️ Before You Start

  • Resetting the counter does not physically clean or replace the waste ink pads. If pads are truly saturated, ink may leak. Consider cleaning/replacing pads after reset.
  • Use this only to temporarily resume printing or after servicing the pads.
  • Works for Windows and macOS (service tool required).

Preventing Future Resets: Hardware Maintenance

Resetting the counter is only half the solution. A verified long-term fix involves cleaning or replacing the waste ink pads. Here is a maintenance guide:

  1. Open the printer – Remove the back cover and bottom tray (requires screwdriver).
  2. Locate the waste ink pads – Usually a white sponge pad in the bottom-right corner.
  3. Wear gloves – The ink is water-resistant and stains.
  4. Remove and wash – Rinse the pad under warm water until water runs clear. Squeeze dry.
  5. Reinstall and reset counter again – After physical cleaning, perform the Service Tool reset once more.

This ensures no leakage occurs, making your resetear impresora canon g2110 truly verified and safe.

Requirements:

  • Windows PC (Windows 7, 8, 10, or 11 – 32-bit or 64-bit)
  • USB cable (printer must be connected directly to the computer; Wi-Fi will not work for this process)
  • Canon Service Tool (version 4900 or 5200 is known to work with G2110)
  • Administrator access on your PC

2. Is the Service Tool a virus?

The official tool is not a virus, but many downloads online include malware. Always scan downloaded files with Windows Defender or Malwarebytes. A verified hash for ST4900 is available on service forums.

Conclusión

El reseteo de la Canon G2110 es un proceso técnico pero accesible. Recuerda siempre que resetear el contador es solo "avisar" a la impresora que hay una esponja nueva o limpia. Si no limpiaste la esponja física, monitorea la bandeja trasera para evitar fugas de tinta.

¿Te funcionó este método? Déjanos un comentario si encontraste otra solución verificada.

⚠️ Antes de Empezar: El paso físico (Crucial)

Antes de resetear el software, debes verificar la condición física de la esponja de residuos. Si reseteas la impresora sin limpiar la esponja, esta se desbordará y manchará todo de tinta.

  1. Ubica los tapones de mantenimiento: En la parte trasera o lateral de la G2110, hay una pequeña tapa (o se accede quitando la carcasa lateral) que da acceso a las esponjas absorbentes.
  2. Limpieza: Saca las esponjas con cuidado, lávalas con agua caliente y jabón hasta que salga el exceso de tinta. Déjalas secar muy bien antes de volver a ponerlas.
    • Nota: Si no quieres abrir la impresora, asegúrate de usar una "bandeja de residuos" externa, ya que el contador volverá a cero y la impresora seguirá expulsando tinta de limpieza.