The RE CO SYS (often stylized as Recosys) remote control manual details how to operate their "Made in India" smart switch modules designed for lights and fans. These devices bridge traditional manual switching with remote automation and are compatible with modular switch plates like Anchor Roma. Core Operation Guide
Two-Way Control: You can operate the connected devices either via the physical buttons on the base unit or through the infrared (IR) remote.
Switch Selection: On many Recosys remotes, you must first "activate" the desired switch:
Press a group button (e.g., G-1 to G-5) to select a specific switch.
The selected switch will remain active for about 4 seconds for you to input commands.
Fan Speed Control: Supports 8-step speed adjustment. Use the up/down or dedicated speed buttons to regulate the fan humming-free.
Learning Feature: A standout feature of Recosys units is their ability to learn signals from other IR remotes (like TV or Set-Top Box remotes), allowing you to control your lights and fans without needing the original company remote. Advanced Features & Timers
On/Off Timer: You can set a timer (typically 1–9 hours) to automatically turn a device on or off. Sleep Mode:
Delay Timer: Sets a delay (1–6 hours) before sleep mode begins.
Automatic Regulation: Once active, the fan speed automatically decreases by one step every hour until it reaches the minimum speed, ensuring you don't get too cold overnight.
Memory Function: The unit includes in-built memory to remember the last state (On/Off) before a power cut, restoring it automatically once power returns. Installation Basics
Wiring: The kit typically uses five color-coded wires: Red (Phase) and Black (Neutral) for power input, while the Yellow wire is usually reserved for the fan to enable speed regulation.
Surge Protection: Features a 3-second power-on delay to protect connected appliances from voltage fluctuations during power resumption.
These videos provide visual walk-throughs for wiring your Recosys unit and using its remote features: Remote Control Operation for Fan & Light 1K views · 2 years ago YouTube · Tech Icon Plus
RE CO SYS Remote Control Switch: Comprehensive User Manual RE CO SYS Remote Control Switch
is an Indian-manufactured smart home solution designed to integrate manual switching with wireless automation. It is primarily used to control lights and fans, offering advanced features like IR learning, programmable timers, and "hum-free" fan speed regulation. 1. Key Features & Specifications Dual Control
: Operable via the included remote or manual buttons on the base unit. Fan Regulation : Supports 7-step or 8-step "hum-free" speed adjustments. Advanced Learning
: Capable of learning signals from other IR remotes (TV, STB, mobile IR blasters), allowing you to control your switches with your existing devices. Timers & Sleep Modes On/Off Timer : Set devices to trigger after 1–9 hours. Sleep Mode
: Automatically decreases fan speed by one step every hour until it reaches the minimum setting. Smart Integration : Compatible with Alexa and Google Home when used with a Wi-Fi IR Blaster 2. Installation Guide
Installation typically replaces existing modular switches without requiring new wiring. Safety First : Switch OFF the mains power supply. Remove Old Unit
: Disconnect the existing fan regulator or light switch to create space. : Connect to the Phase (Live). Black Wire : Connect to Neutral. Yellow/Other Wires : Connect to the specific light or fan load.
: Insert the RE CO SYS base unit into the modular plate (compatible with Anchor Roma and similar modular plates). 3. Operating Instructions Recosys 2.0 Remote Control Guide details how to manage multiple switches with one remote: Switch Selection to select which switch group you want to control.
Once a group is active (indicated on the display), commands for speed (R1–R9) or power will only apply to that specific unit for approximately 4 seconds. Setting the Timer recosys remote manual
button repeatedly to cycle through 1–9 hours for automatic shutdown. Activating Sleep Mode
button. Ensure the fan is already running; the system will then gradually reduce speed over several hours. 4. Troubleshooting & Safety Power Protection
: The unit features a 3-second power-on delay to protect electronics from voltage surges during power resumption. Fan Jam Prevention
: When starting at low speeds, the unit automatically boosts the fan to full speed for 3 seconds to prevent motor jamming. Non-Volatile Memory
: Settings are saved during power failures, ensuring the device returns to its last state upon restart. for syncing the switch with a universal remote Recosys 2.0 Remote Control Guide | PDF | Switch - Scribd
The RE CO SYS (often stylized as RecoSys) remote control systems are versatile smart home units designed to control ceiling fans and lights. The following breakdown covers setup, programming, and key features based on official guides and user manuals. Core Programming & Setup
For advanced modular models like the RecoSys 2.0, programming allows a single remote to manage multiple switches:
Pairing Mode: The system uses "learning" technology to pair with specific switches. This makes them compatible with Wi-Fi IR Blasters for voice control via platforms like Amazon Alexa.
Group Commands: You can program multiple programmable switches to respond to a single remote, including setting addressable group commands to control up to five switches simultaneously.
Modular Installation: The units are designed to fit standard modular plates (such as Anchor Roma or Crabtree) and can work in parallel with existing manual switches, ensuring you don't lose manual control. Remote Button Functions
Standard RecoSys remotes typically include the following controls: Power: "All-Off" and "All-On" buttons for global control.
Fan Speed: Dedicated buttons for an 8-step digital regulator to precisely adjust fan speed.
Light Channels: Labeled buttons (L1, L2, L3) to toggle individual light connections. Timer & Sleep:
Customizable Timers: Set schedules for lights or fans to turn on/off in 1 to 9-hour increments.
Sleep Mode: Allows for delayed power-down, often adjustable in one-hour steps up to six hours. Installation & Wiring
The base unit usually features a five-wire configuration for DIY-friendly installation:
Input: Red (Phase/Face) and Black (Neutral) wires connect to your main power. Output: Yellow: Connect to the fan for speed regulation. Gray & Green: Connect to two separate light fixtures.
Manual Override: The receiver unit itself often includes physical buttons for manual operation if the remote is misplaced. Troubleshooting & Support
Visual Indicators: Many models, such as the AT3S_s, feature a digital display showing the current fan speed or status settings.
Manuals: For specific model setup guides and troubleshooting, you can browse the RE CO SYS Manuals & User Guides. RecoSys 2.0 Remote Control Guide | PDF | Switch - Scribd
Understanding how to operate the Recosys Remote Control is essential for managing your recovery system efficiently. This comprehensive guide covers everything from initial synchronization to advanced troubleshooting to ensure your sessions are seamless and effective. Recosys Remote Overview
The Recosys remote is designed for tactile, one-handed operation. It allows users to adjust intensity, cycle through modes, and manage session timers without interrupting their recovery flow. The RE CO SYS (often stylized as Recosys
Wireless Connectivity: Uses Bluetooth or RF signals (depending on the model).
Ergonomic Design: Fits comfortably in the palm with accessible buttons.
LED Indicators: Provides visual feedback on battery life and active settings. Step 1: Initial Pairing and Setup
Before using the system, the remote must be "handshaked" with the main control unit. Power On: Turn on your Recosys base unit.
Activate Pairing Mode: Press and hold the power button on the remote for 5 seconds.
Watch for Lights: The LED indicator will usually flash blue or white during search.
Confirmation: A solid light or a beep from the base unit indicates a successful link. Step 2: Key Functions and Button Map
Most Recosys remotes follow a standard layout to keep operation intuitive:
Power/Play/Pause: Single press to start or pause a session; long press to turn off.
Intensity (+ / -): Adjusts the pressure or frequency levels.
Mode Select (M): Cycles through pre-programmed recovery patterns (e.g., Flush, Massage, or Pulse).
Timer Toggle: Adjusts the session length (typically 15, 30, or 45 minutes). Step 3: Operating Modes Explained
Understanding what each mode does helps you tailor the recovery to your specific needs:
Mode A (Recovery): Sequential pressure designed to move metabolic waste away from the limbs.
Mode B (Circulation): Rapid pulsing to stimulate blood flow and oxygenation.
Mode C (Custom/Intense): Sustained pressure on specific zones for deep tissue relief. Step 4: Maintenance and Battery Care
To ensure your remote lasts for years, follow these maintenance tips:
Charging: Use the provided USB-C or Micro-USB cable. Avoid high-voltage fast chargers which may degrade the small battery.
Cleaning: Use a slightly damp microfiber cloth. Do not submerge the remote in water.
Storage: Keep the remote in a cool, dry place. Extreme heat can cause the battery to swell. Troubleshooting Common Issues If your remote isn't responding, try these quick fixes:
Unresponsive Buttons: Check if the "Lock" switch (if applicable) is engaged.
Connection Drops: Ensure there are no large metal objects or high-frequency electronics between the remote and the base unit. Chapter 6: Troubleshooting Common Error Codes When something
Battery Drain: If the remote dies quickly, ensure you are fully charging it until the light turns green/solid.
Factory Reset: Usually achieved by holding the Power and Mode buttons simultaneously for 10 seconds.
If you'd like to dive deeper into specific settings, I can help if you tell me:
Which specific Recosys model do you own (e.g., the Pro, the Go, or a legacy version)?
Are you experiencing a specific error code or light sequence? Do you need help programming a custom routine?
I can provide the exact button sequences for your specific device. AI responses may include mistakes. Learn more
This guide explains how to use and maintain a (often branded as
) remote control system for lights and fans. These modular switches are designed to bridge manual wall switching with wireless home automation. 1. Programming & Functionality Remote Button Mapping
: You can program specific buttons to control up to five individual switches or group them for simultaneous control. Cyclic & Sleep Timers
: Set timers for 1–6 hours to automatically turn off devices, helping with energy management. IR Learning
: The system supports "IR Learning," allowing it to be controlled by universal remotes or smart home hubs like Alexa and Google Home via an IR blaster. Memory Function
: Includes non-volatile memory that retains your settings even after a power outage. 2. Wiring and Installation
Standard units typically feature a base unit and a transmitter. Proper wiring is critical for both safety and speed control:
: Red (Phase) and Black (Neutral) wires connect to the main power source. : Dedicated for the , often including a digital regulator for speed control. Gray/Green : Used for
: To maximize range, the black antenna wire should be positioned as high as possible outside the metal junction box. 3. Troubleshooting & Maintenance If the unit fails to operate, check these common points: : Ensure the transmitter has a fresh battery. Manual Override
: Test the physical button on the base unit to see if the device responds manually; if it does, the issue is likely with the remote or receiver. Code Matching
: Confirm that the 16-combination code (dip switches) in the transmitter matches the receiver exactly to prevent interference from nearby devices like garage door openers. Binding Reset
When something goes wrong, the Recosys Remote Manual provides an error code legend. Here are the three most common errors you will encounter:
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | E-01 | Signal Lost | Move closer to receiver. Check for metal obstructions. | | E-04 | Low Battery | Replace batteries immediately. Remote will shut down in 5 mins. | | E-12 | Button Stuck | A button is physically depressed or has debris underneath. Clean with alcohol swab. | | E-19 | Profile Mismatch | The remote is paired to Receiver A, but trying to control Receiver B. Navigate to Menu > Device Control to switch. |
Pro Tip from the manual: Do not peel off the protective film over the LCD screen until the remote is fully configured.
To clear all memory positions and unpair: