Pci 60806a Driver -

The "PCI 60806A" appears to be a reference to a specific hardware component, likely a PCI (Peripheral Component Interconnect) device with the ID 60806A. This ID is used to identify the device to the operating system and to load the appropriate driver.

Without more specific information, it's challenging to provide a detailed answer about the driver for this device. However, I can offer some general information about PCI devices and drivers:

Method 1: Windows Update (The Easiest Fix)

Sometimes, the driver is there, but Windows just needs a nudge. pci 60806a driver

  1. Right-click the Start button and select Device Manager.
  2. Right-click on PCI 60806A (or the device with the yellow triangle).
  3. Select Update driver.
  4. Choose Search automatically for drivers.

Note: If your Ethernet port isn't working, you will need to be connected via Wi-Fi (or a USB tethering on your phone) for this to work.

Conclusion

A reference to “PCI 60806A driver” typically points to an unidentified PCI device requiring a specific driver matching vendor/device IDs. The reliable approach is to extract hardware IDs, identify the vendor and device, obtain the driver from the OEM or component vendor, and install the correct, signed driver for your OS. Follow safe installation practices, keep drivers and firmware updated, and consult vendor support if identification or installation fails. The "PCI 60806A" appears to be a reference

Related search suggestions:

  • "how to find PCI vendor and device ID"
  • "pci ids lookup"
  • "install unknown PCI device driver Windows"

2. The Role of the Driver

The driver acts as a translator between the SATA controller’s hardware language and the operating system’s storage subsystem. Without a correct driver: Right-click the Start button and select Device Manager

  • Connected hard drives or SSDs will not appear in “This PC.”
  • The device may show a yellow exclamation mark in Device Manager under “Storage Controllers” or “Other Devices.”
  • The system may fail to boot if the OS is installed on a drive connected to this card.

Quick Identification via Windows Device Manager (if already partially installed)

  1. Right-click Start > Device Manager.
  2. Look under Other devices for an unknown device with a yellow exclamation.
  3. Right-click it > Properties > Details tab.
  4. In the Property dropdown, select Hardware Ids.
  5. You will see IDs like:
    • PCI\VEN_9710&DEV_9865 → MosChip MCS9865
    • PCI\VEN_1409&DEV_7168 → SUNIX chip
    • PCI\VEN_13A8&DEV_0158 → Exar/Oxford

VEN_9710 and DEV_9865 is the signature for the MosChip 9865, which powers 90% of PCI 60806A cards.

Problem 4: Card Recognized but No Data Transmission

Possible causes:

  • Broken handshake lines – use a loopback test (COMTest software).
  • Wrong baud rate – set matching rate in device manager and your terminal app (PuTTY, RealTerm).
  • Power issue – some PCI 60806A cards require 5V on PCI slot. Modern motherboards with 3.3V only may need a different card.

Troubleshooting

| Issue | Possible solution |
|-------|------------------|
| Driver not loading | Disable Secure Boot (Windows) or sign the driver. |
| Card not detected | Reseat PCI card, check BIOS IRQ assignment. |
| Error 10 / Code 28 | Manually install driver via “Update driver” → “Have Disk”. |
| Linux – no /dev/pci60806a | Run sudo mknod /dev/pci60806a c 240 0 (major may vary). |

RELATED ARTICLESMORE FROM AUTHOR