This blog is about English Study material for different classes and competitive exams. It contains very simple, useful, and comprehensive chapter-wise study material for XI, XII and other classes for CBSE and other boards.
Openbullet This Config Does Not Support The Provided |top| -
This error usually pops up in OpenBullet when the configuration file (.loli or .anom) you are using is missing the necessary settings for the type of data you are trying to process (e.g., trying to run a "Proxyless" config with proxies, or using a "Login" config for "Sign up" data). 💡 Common Causes
Data Type Mismatch: The config is built for Email:Pass but you loaded User:Pass.
Proxy Settings: The config is hardcoded for a specific proxy type (or none at all).
Missing Inputs: The config requires a specific custom input that isn't provided.
Version Issues: Using an OpenBullet 2 config in SilverBullet or vice versa. 🛠️ How to Fix It
Check the Config Header: Open the config in the "Stacker" or "Editor" tab. Check the "Data Type" setting and ensure your wordlist matches it.
Toggle Proxy Mode: If the error mentions proxies, try switching the "Proxies" button to "On" or "Off" depending on the config's requirements.
Review "Custom Inputs": Some configs require you to enter a specific API key or URL in the "Input" field before starting.
Check "Accept Service": Ensure the wordlist you are using is accepted by the config's specific target site.
🚀 Pro Tip: Always check the Log tab at the bottom of the Runner; it will usually tell you exactly which requirement is missing.
Mismatch in Config SettingsEach config has an "Allowed Wordlist Types" setting. If your wordlist is categorized as Credentials but the config only allows MailPass, the runner will block the job.
Fix: Go to the Config Manager, edit the config, navigate to Other Options (or Data tab in OB2), and ensure the wordlist type you are using is moved to the Allowed side.
Environment.ini MisconfigurationThe Environment.ini file defines the rules (regex) for what constitutes a valid wordlist type. If your wordlist doesn't match the regex defined for its type, OpenBullet may fail to process it.
Fix: Check your Environment.ini (located in the UserData folder). Ensure the regex for types like Credentials or UserPass matches your data (e.g., ^.:.$ for a standard colon separator).
Incorrect Data Selection in the RunnerWhen starting a new job, the Runner requires you to select both a config and a wordlist. If the wordlist was imported with the wrong type assigned to it, the conflict triggers this error.
Fix: Re-import your wordlist and explicitly select the type that matches your config's requirements (e.g., Credentials, URLs, or Emails).
Version Incompatibility (OB1 vs. OB2)Configs for OpenBullet 1 (.loli) and OpenBullet 2 (.opk) handle data types differently. While OB2 can often import older configs, manual adjustments to the data settings are frequently needed after the import. Quick Checklist for Fixing Open Config Manager: Check the Data or Other Options tab.
Verify Allowed Types: Ensure your specific wordlist type is in the "Allowed" list.
Save & Rescan: Always save the config and click "Rescan" in the Runner after making changes to ensure they take effect.
Are you using OpenBullet 1 or OpenBullet 2, and what is the specific Wordlist Type you are trying to run?
It sounds like you're looking for a text that explains or addresses the error message:
"Openbullet This Config Does Not Support The Provided" — likely encountered when using OpenBullet (a web testing tool) with a mismatched config file.
Here’s a sample explanation and troubleshooting text you can use:
Error Explanation: "Openbullet This Config Does Not Support The Provided"
When using OpenBullet, you may encounter the error:
"This config does not support the provided..."
This typically means the configuration file (.loli or .opk) you are trying to run is incompatible with the input data (e.g., combos, proxies, or custom input) you've supplied.
Conclusion
The "This config does not support the provided" error is essentially OpenBullet's way of telling you it's confused. It’s a data formatting issue, not a software bug.
By double-checking your Wordlist type against the Config's requirements and ensuring your slicers are set up correctly, you can clear this error in seconds and get back to what matters: checking your accounts.
Have a specific OpenBullet error you'd like us to cover? Drop a comment below!
The screen flickered once—then held steady.
OpenBullet. The name alone carried weight in certain circles—those corners of the internet where data was currency and anonymity was armor. For Leo, it was just another Tuesday night. A cracked energy drink next to his keyboard, the hum of his desktop fans like white noise, and a fresh list of combos he’d scraped from a half-accessible forum dump.
He dragged the .txt file into the loader. Two hundred thousand lines. Email:password. Most of them garbage, but that was the game—you sifted through the sand until your fingers caught on something sharp.
Leo hit Start.
The bots whirred to life in the log window—green text crawling upward like vines on a trellis. Validating... Retrying... Captcha detected... Skipping. The usual rhythm. He leaned back, waiting for those rare, beautiful words: Hit.
But after thirty seconds, a different message appeared.
OpenBullet: This config does not support the provided input type.
He blinked. Read it again.
“What the hell?”
He’d used this config a hundred times. A custom LoliShift config for a mid-tier retail site—nothing fancy, but reliable. He checked the settings. Input type: Combo (email:pass). His file was exactly that. No weird delimiters. No empty lines. UTF-8 encoding.
He tried a smaller test list—ten combos he’d manually verified earlier that week.
Same error.
“Config’s broken,” he muttered, already reaching for his backup folder.
But the backup did the same thing. Then the third one. Every config he tried—old staples, fresh downloads, even a legacy Puppeteer config he’d written himself—threw the same red flag.
Does not support the provided input type.
Leo sat forward, the caffeine suddenly not strong enough. He opened the config file in a text editor.
It looked fine. XML structure intact. The input options clearly listed "email:pass" as accepted.
He closed the editor. Opened the OpenBullet console directly—bypassed the GUI. Same error. Openbullet This Config Does Not Support The Provided
That’s when he noticed something strange.
His system clock read 03:14 AM. He didn’t remember it being that late. Or that early. He’d started at 11:00 PM. Four hours? No—he’d only been running scans for twenty minutes.
He glanced at his phone.
03:14 AM.
He refreshed the browser tab he’d left open—the forum where he’d scraped the combos. The page loaded, but the date on the posts had changed. Last week’s threads now showed timestamps from next month.
Leo’s hands hovered over the keyboard. He wasn’t a superstitious person. If you made a living sneaking through other people’s broken security, you learned to trust only logic, logs, and layers.
But logic had nothing to say about the config error.
He opened a command prompt and pinged the retail site’s login endpoint—the one his config had hammered ten thousand times before without issue.
Request timeout.
He tried a different site. Same timeout.
Every target his configs had ever touched was now unreachable.
Not blocked. Not rate-limited. Just... gone. Like the door had never existed.
His machine’s fans kicked up. The log window on OpenBullet, still frozen on the error message, suddenly scrolled.
Attempting fallback... Fallback failed. This config does not support the provided reality frame.
Leo stared at those last two words.
Reality frame.
That wasn’t in any config he’d ever seen.
His mouse cursor moved on its own—just a pixel, just once. Then stopped.
The energy drink can was empty. He didn’t remember finishing it.
Leo shut the laptop lid.
The error message burned behind his eyes. And somewhere, in the quiet between 03:14 and whenever morning decided to arrive, he realized the truth.
The config hadn’t stopped working.
He—the input he provided—was what no longer fit.
The combos hadn’t changed. The targets hadn’t moved.
The error wasn’t a bug.
It was a door closing. And Leo wasn’t sure which side he’d been left on.
OpenBullet uses specific data formats (like Credentials, Emails, or Cards) to know how to parse your input file. If a config is built to use UserPass (username:password) but you try to run it with a MailPass (email:password) wordlist, it will trigger this error. How to Fix It Check the Config Requirements: In OpenBullet, go to the Configs tab.
Find your config, select it, and go to Other Options -> Data.
Look for Allowed Wordlist Types. This tells you exactly what format the config expects (e.g., Credentials). Verify Your Wordlist Settings: Go to the Wordlists tab. Check the entry for the wordlist you are trying to use.
Ensure the Type dropdown for that wordlist matches one of the "Allowed Wordlist Types" you found in the config. Adjust and Re-select:
If they don't match, you can either change the type of your Wordlist in the Wordlists tab or add the new type to the "Allowed Wordlist Types" in the config settings.
After making changes, you may need to re-select the config in the Runner to refresh the settings.
Are you using a custom wordlist format, or is this a standard User:Pass list?
This config does not support the provided Wordlist Type (MAC)
This config does not support the provided Wordlist Type (MAC) - Questions - OpenBullet. discourse.openbullet.dev
[REQUEST] Wordlist with Multiple Types · Issue #590 - GitHub
1. Mismatched Data Type (The #1 Cause)
This is the most frequent trigger for "Openbullet this config does not support the provided". The config author explicitly coded the config to split the input by a specific delimiter (usually :). If the delimiter is missing or different, the config cannot extract the Username and Password variables.
Step 2: Convert Your Combolist to the Correct Format
If you have a format mismatch, you need to transform your data. Use a text editor like Notepad++ or a tool like OpenBullet’s built-in "Toolbox" .
- To convert Email:Pass to User:Pass: You need to strip the domain from the email. Use regex search/replace: Find
@.*:and replace with:. - To convert User:Pass to Auto: Use the Toolbox’s "Convert" function to add dummy columns.
- To fix Auto mode: Ensure the exact number of columns matches. If the config expects 3 columns, your line must have 2 delimiters (e.g.,
data1|data2|data3).
The Four Root Causes of the Error
After analyzing hundreds of community posts (on Reddit, GitHub, and hacking forums), four main scenarios trigger this error.
Technical Deep Dive: Resolving the "Config Does Not Support The Provided" Error
If you are a user of OpenBullet (or OpenBullet 2), encountering the red error message "This Config Does Not Support The Provided [Data]" is a rite of passage. It is one of the most common hurdles for beginners and a frequent annoyance for veteran config makers.
This error is not a bug in the software; it is a validation failure. It means the "Key" you are trying to use does not fit the "Lock" defined inside the Configuration file.
Here is a breakdown of why this happens and how to fix it.
3. How to Diagnose Quickly
Before running a config, always check the Config Info tab within OpenBullet.
- Load the Config.
- Click on the Info or ReadMe button/tab.
- Look for the "Input Format" or "Wordlist Type" section.
- It will tell you exactly what is required (e.g.,
MailPass,UserPass, or Custom).
Feature: Automatic Config Compatibility Checker for "This Config Does Not Support The Provided"
Problem addressed
- Users see the error "This Config Does Not Support The Provided" when a config is missing required modules, parameters, or input formats for a target (combo, proxy, or module).
Feature overview
- Add an in-app automated compatibility checker that inspects a selected config and the provided inputs (combo format, proxy type, modules) and reports mismatches with actionable fixes.
How it works (steps)
-
Input capture
- Read selected config file (parser for OpenBullet config XML/JSON).
- Read provided combo sample, proxy sample, and runtime settings.
-
Static analysis of config
- Enumerate required modules, expected input fields, regex/format rules, and accepted proxy types.
- Extract expected combo/key order, delimiters, and required fields (email, pass, token).
-
Runtime validation
- Validate provided combo sample(s) against expected combo format and field count.
- Validate proxy sample(s) for supported protocols (HTTP/S, SOCKS4, SOCKS5) and auth style.
- Check for presence of required modules (e.g., Request, Regex, Captcha solver, Database) and flag missing ones.
- Detect mismatched data types (e.g., numeric expected vs string provided) and required headers/cookies.
-
Error reporting UI
- Present concise list of issues with severity (Critical, Warning, Info).
- For each issue, show:
- What was expected (example format or module)
- What was found (sample)
- Suggested fix (exact config edit, regex, or convert proxy)
- Offer one-click fixes where safe (e.g., auto-insert missing common modules, convert proxy list to correct format, reorder combo fields).
-
Test-run sandbox
- Allow dry-run using a single combo + proxy to confirm fixes without executing full attack.
- Show parsed request preview (headers, body, replaced tokens) and sample response match rules.
-
Logging & export
- Export full compatibility report as JSON or human-readable log.
- Save corrected config as a new file/version.
UI suggestions
- Panel in config editor: "Compatibility Checker" button → modal with tabbed sections: Summary, Combo, Proxy, Modules, Fixes, Sandbox.
- Inline highlights: clicking an issue jumps to the relevant config node.
- Quick actions: "Auto-fix combo format", "Convert proxies to SOCKS5", "Insert missing Request module".
Implementation notes
- Reuse existing config parser library; keep checks deterministic and read-only by default.
- Provide safe auto-fix whitelist to avoid changing custom logic.
- Add unit tests with example configs and common combo/proxy formats.
Minimal example fixes to surface
- Missing username/password fields: suggest pattern "email:password" and show regex.
- Proxy protocol mismatch: convert "ip:port" to "ip:port:username:password" if auth detected.
- Regex mismatch: show sample that fails and offer corrected regex.
Benefits
- Reduces user frustration and support burden.
- Speeds up config troubleshooting and onboarding.
- Prevents wasted runs and potentially harmful misconfiguration.
Would you like a sample UI mockup, a JSON schema for the checker report, or a starter pseudocode implementation?
OpenBullet: The Config Conundrum - Understanding and Resolving the "This Config Does Not Support The Provided" Error
OpenBullet, a popular open-source tool, has gained significant traction among cybersecurity professionals and enthusiasts alike for its versatility in managing and stress-testing web applications. However, users often encounter a frustrating error message: "This config does not support the provided." In this article, we'll delve into the world of OpenBullet configurations, explore the possible causes of this error, and provide actionable steps to resolve it.
Understanding OpenBullet Configurations
Before we dive into the error, let's briefly discuss OpenBullet configurations. A configuration, or "config" for short, is a set of predefined settings that determine how OpenBullet interacts with a target web application. These settings include parameters such as request headers, cookies, and payloads. Configurations are essential in OpenBullet, as they enable users to tailor their testing approach to specific applications and use cases.
The "This Config Does Not Support The Provided" Error
The "This config does not support the provided" error typically occurs when OpenBullet is unable to reconcile the configuration file with the provided data. This error can manifest in various scenarios:
- Incompatible configuration version: If the configuration file is outdated or incompatible with the current version of OpenBullet, this error may occur.
- Invalid or corrupted configuration file: A malformed or corrupted configuration file can prevent OpenBullet from parsing the settings correctly, leading to this error.
- Insufficient or incorrect settings: If the configuration file lacks required settings or contains incorrect values, OpenBullet may refuse to process the provided data.
Troubleshooting Steps
To resolve the "This config does not support the provided" error, follow these step-by-step troubleshooting guidelines:
- Verify configuration file compatibility: Ensure that the configuration file is compatible with the current version of OpenBullet. Check the OpenBullet documentation or GitHub repository for information on configuration file updates and changes.
- Validate configuration file integrity: Inspect the configuration file for any syntax errors or corruption. You can try re-saving the configuration file or re-exporting it from the original source.
- Review and adjust settings: Double-check the configuration file settings to ensure they are accurate and sufficient. Pay particular attention to required fields, such as API keys, URLs, and payloads.
- Update OpenBullet: Make sure you're running the latest version of OpenBullet. Outdated versions may not support certain configuration file features or may contain bugs that have been resolved in later releases.
- Consult the OpenBullet community: If none of the above steps resolve the issue, seek help from the OpenBullet community forums, GitHub discussions, or social media groups. Experienced users and developers may be able to provide valuable insights or custom solutions.
Best Practices for OpenBullet Configurations
To minimize the likelihood of encountering the "This config does not support the provided" error, follow these best practices:
- Keep configurations up-to-date: Regularly update your configurations to ensure compatibility with the latest OpenBullet version.
- Validate configurations: Verify configuration files for syntax errors and correctness before using them.
- Document configurations: Maintain records of your configurations, including changes and updates, to facilitate troubleshooting and reuse.
By understanding the causes of the "This config does not support the provided" error and following the troubleshooting steps outlined in this article, you'll be better equipped to resolve issues and optimize your OpenBullet experience. Additionally, adhering to best practices for OpenBullet configurations will help you get the most out of this powerful tool while minimizing errors and downtime.
"This Config Does Not Support The Provided" in OpenBullet typically occurs when the configuration (.loli or .anom file) is being used with a it wasn't designed for Common Causes and Fixes Data Type Mismatch : The config might be built for Credentials
(Email:Password or User:Pass), but you are trying to run it with a list of : Check the tab in OpenBullet. Ensure the Input Data Type matches your wordlist. If the config requires Email:Pass and you provide , it may fail if it specifically looks for an "@" symbol. Missing or Incorrect Captures
: The config is looking for a specific data field (like a "Numeric" PIN or a "SSN") that isn't present in your text file.
: Verify the format required by the config author. Usually, this is listed in the config's notes or the block of the LoliScript. Config Version Incompatibility : You are trying to run an OpenBullet 1 OpenBullet 2 (Native) without importing it correctly, or vice-versa.
: Use the "Import" function in OB2 to convert legacy configs, or ensure you are using the specific version of the environment (OpenBullet, SilverBullet, or Anomaly) the config was built for. Proxies vs. Proxyless
: If the config is set to "Proxyless" but you have loaded a proxy list into the runner, it may trigger a support error in certain modded versions of the software.
: Disable proxies in the Runner settings if the config is meant to run hits directly. How to Check the Required Format Config Manager Right-click the config and select Look at the Settings > General Accepted Data Types
field. It will show you exactly what format the config expects (e.g., Are you trying to run a specific data format like a combo list, or is this happening with
Troubleshooting "This Config Does Not Support The Provided" in OpenBullet
If you are using OpenBullet for web testing or data parsing, encountering the error "This Config Does Not Support The Provided Data" is one of the most common roadblocks. This error essentially means there is a "handshake" failure between the data you are trying to process (your wordlist) and the logic written inside the configuration file (.anom or .loli).
In this guide, we will break down why this happens and how to fix it so you can get your runner back online. What Causes This Error?
OpenBullet is highly logical. Every configuration is designed to handle a specific type of input. When you see this error, the Runner is telling you: "You gave me X, but I was programmed to only handle Y." The three primary culprits are:
Data Type Mismatch: You are using a "Credentials" config but loading a "URL" list (or vice versa).
Missing Input Slicing: The config expects a specific format (like email:pass) but your list is formatted differently (like user:pass or just emails).
Config Logic Restrictions: The developer of the config added a check to ensure the input meets certain criteria (e.g., must contain an @ symbol) and your data failed that check. How to Fix It: Step-by-Step 1. Check the "Data Type" Setting OpenBullet configs have a "Data Type" requirement.
The Fix: Go to the Runner tab and look at the config you selected. Right-click it or check the settings to see what Data Type it requires (e.g., Default, Email, Credentials).
Now, look at your Wordlist. When you imported your wordlist, did you select the same type? If the config is set to Credentials and your wordlist was imported as Default, OpenBullet will throw this error. 2. Verify the Separator Most configs expect the standard colon separator (:).
The Fix: Open your wordlist file in Notepad++. Does it look like admin:password123? If it uses a semicolon ; or a comma ,, OpenBullet won't be able to split the data into the variables
You can change the separator in the Settings > General tab of OpenBullet, but it’s usually easier to just use a standard : format in your text file. 3. Inspect the Config "Input" Logic If you are comfortable with the Stacker or LoliScript tab: Open the config in the Config Manager. Go to the Settings sub-tab within the config.
Look for Input Settings. Some authors restrict the "Allowed Data Types." Ensure the box for the data type you are using is checked.
Check for any "Custom Inputs" or "Script" blocks at the very beginning of the config that might be filtering out your data based on length or character requirements. 4. Re-import the Wordlist Sometimes the simplest fix is the most effective. Remove the wordlist from the Wordlist Manager. Click Add to re-import it.
Carefully select the Type (usually Credentials for user:pass combos) and ensure the path is correct. Re-assign this wordlist to your Runner. This error usually pops up in OpenBullet when
The "This Config Does Not Support The Provided" error isn't a bug in the software; it's a configuration mismatch. Always ensure that your Wordlist Type matches the Config Requirements, and that your data is cleanly formatted with the correct separator.
If you are using a leaked or shared config, the developer may have locked the input to a specific format (like Email only). In that case, you may need to use a "Mail Combo" instead of a "User Combo."
The error message "This config does not support the provided wordlist type" occurs because the data format of your wordlist (e.g., user:pass) doesn't match the format allowed in your OpenBullet config settings. Quick Fix Steps
Open the Config Manager: Go to the Configs tab and select the specific config you are trying to use.
Navigate to Settings: Click on Stacker (the config editor) and find the Settings or Other Options tab. Update Allowed Types: Locate the Wordlist Type or Data section. Find the list of "Allowed Wordlist Types".
Ensure the type that matches your wordlist (usually Credentials for user:pass) is moved to the Allowed side or checked.
Save and Reload: Click Save in the config editor and retry your job. Advanced Troubleshooting
If the correct type is already allowed but it still fails, check your environment settings:
Verify Environment.ini: Ensure your Environment.ini file (found in the UserData or root folder) actually defines the wordlist type you are trying to use.
Regex Match: OpenBullet uses a Regex pattern in Environment.ini to validate your data. If your wordlist line doesn't match that pattern (e.g., using a semicolon ; instead of a colon :), it will reject the file.
Matching Slices: Ensure the "Slices" defined in the environment match the variables used in your config (e.g., USER and PASS).
Did you download this config from a forum, or are you creating it yourself from scratch?
) and the data types allowed within the configuration settings. Root Cause
Configurations in OpenBullet are built to accept specific data formats defined by regular expressions (Regex) in the Environment.ini
file. If a config is set only to accept the "Credentials" type and you upload an "Email" wordlist, the software blocks the job to prevent processing errors. How to Fix the Error 1. Adjust Config Settings (OpenBullet 2)
Most modern configs can be quickly updated through the user interface: Config Manager and select the problematic config. Navigate to the view, then find the Other Options Look for a section titled Wordlist Types Allowed Wordlist Types Ensure the type of your wordlist (e.g., Credentials ) is moved to the the config before trying to run the job again. Environment.ini Configuration
If the required wordlist type is missing entirely from your options, you must define it in your environment file: Locate the file at OB2\UserData\Environment.ini (for OpenBullet 2) or the root folder (for OB1).
Check that it includes a valid definition for the data you are using. A standard "Credentials" entry looks like this:
[WORDLIST TYPE] Name=Credentials Regex=^.*:.*$ Verify=True Separator=: Slices=USERNAME,PASSWORD Use code with caution. Copied to clipboard Ensure the matches the format of your text file (e.g., for colon-separated data). 3. Re-Select the Config in the Runner After making changes to a config's settings or the Environment.ini If you have a job already created in the , the changes may not apply immediately. Stop the current job, re-select the config
from the list, and then re-upload your wordlist to refresh the settings.
If you are importing configs from third parties, they may come with a custom Environment.ini
The error message "This config does not support the provided wordlist type"
in OpenBullet occurs when the data format of your loaded wordlist (e.g., EMAIL:PASS
) does not match the data format expected by the configuration file. Quick Fix Guide Check Config Requirements Navigate to the Config Manager tab and select your config. Other Options Look at the Allowed Wordlist Types
list. This shows what format the config is built to process (e.g., Credentials Match Your Wordlist Type When you create a new (Runner), ensure the Wordlist Type
you select in the dropdown menu matches one of the types allowed by the config. Common types include: Credentials : General format. : Typically username:password : Typically email:password Update Environment.ini (Advanced)
If the required wordlist type is missing from your OpenBullet installation, you may need to add it to your Environment.ini file located in the Often, config creators share a custom Environment.ini
with their configs. Replacing your local file with theirs (after backing up) ensures all custom types are recognized. Restart OpenBullet after making any changes to this file. Edit the Config to Support More Types
If you have a wordlist in a different format and want the config to accept it, go to Other Options
in the config settings and manually add the desired wordlist type to the "Allowed" list. Environment.ini Guide to Using Stacker with OpenBullet Configs - Studocu
It sounds like you're running into a common technical error in OpenBullet
(a web testing suite). While "This Config Does Not Support The Provided Input" (or similar wording) is a specific error message rather than a traditional essay topic, I can certainly break down why this happens and how to fix it in an educational format.
Here is a breakdown of the issue, structured to help you understand the mechanics behind the error. Understanding the "Config Input" Error in OpenBullet Introduction
OpenBullet is a powerful automation tool used primarily for data parsing and web scraping. At its core, it relies on
—sets of instructions that tell the software how to interact with a specific website. One of the most frequent hurdles users face is the error message stating that a config does not support the provided input. This usually points to a mismatch between the data source config logic The Root Cause: Format Mismatch The primary reason for this error is a formatting discrepancy
. When you create or load a config, you define what kind of input it expects. This is usually defined in the "Stacker" or "Settings" tab under the Input Data section. Common formats include: Credentials (User:Pass or Email:Pass): The most standard format. Used for single strings like API keys or tokens. Used for bulk URLs or specific IDs.
If your config is set to "Email:Pass" but you upload a list that only contains "Username:Pass," the software will fail to parse the line, triggering the error. Data Parsing and the "Slice" Logic
Inside the config, the software uses "Slices" to chop up your input data. If a config is hardcoded to look for a colon (
) as a separator to split an email from a password, but your data uses a semicolon (
) or a comma, the logic breaks. The config effectively looks at the data and says, "I don't know how to read this," resulting in the "not supported" message. Environment and Version Compatibility Sometimes, the issue isn't the data, but the environment
. OpenBullet has several versions (v1, SilverBullet, OpenBullet 2). A config built for OpenBullet 1 (.loli) will not natively run in OpenBullet 2 (.opk) without conversion. Attempting to force a config into a version of the software it wasn't built for often results in an input error because the engine interprets the instructions differently. How to Fix It Check your Wordlist Type:
Ensure your wordlist type (e.g., Default, Credentials, Numeric) matches what the config requires in its metadata. Verify the Separator:
Open your data file in a text editor. Ensure it uses the exact separator (usually a colon) that the config expects. Inspect the Config Header:
Open the config in the "Debugger" and check if it has specific "Allowed Types." If your data type isn't on that list, you'll need to add it or change your data to match. Conclusion
The "Config Does Not Support Provided Input" error is a safeguard, not a bug. It prevents the software from running "blind" and wasting resources on data it cannot properly process. By ensuring that your input format data separators software versions Error Explanation: "Openbullet This Config Does Not Support
are in sync, you can resolve the issue and ensure smooth automation. Are you trying to fix a specific config right now, or were you looking for a more academic analysis of how these tools handle data structures? AI responses may include mistakes. Learn more