Rc-799m Remote Manual: Onkyo

Onkyo RC-799M is a dedicated infrared (IR) remote control designed specifically for Integra A/V receivers

. It is widely used as a replacement for original models like the RC-707M, RC-738M, and RC-765M. Core Operation Guide For basic use with a compatible Onkyo receiver, no programming is required

; it works immediately upon inserting two AA or AAA batteries (depending on the specific version). Amazon.com Activating Control : To operate your receiver, you must first press the button on the remote. Powering On/Off ON/STANDBY button after selecting the receiver mode. Input Switching Input Selector

buttons (e.g., BD/DVD, CBL/SAT, GAME) to switch the receiver to a specific source. Zone 2 Control : Press the button followed by ON/STANDBY to power your multi-zone system. Programming for External Devices

controls Onkyo receivers out of the box, you can program it to operate other devices like TVs or cable boxes using the following steps: How to Configure Onkyo Settings Review

Onkyo RC-799M Remote Manual Report

Introduction

The Onkyo RC-799M is a remote control designed to work with various Onkyo home theater systems and audio components. This report aims to provide a comprehensive overview of the remote's features, functions, and operations.

Remote Control Layout

The Onkyo RC-799M remote control has a standard layout with a sleek and ergonomic design. The remote has a total of 55 buttons, which are divided into several sections:

  1. Top Section: Power button, Input selector buttons (e.g., BD, DVD, GAME, etc.)
  2. Navigation Section: Arrow buttons (up, down, left, right), OK button, and Menu button
  3. Playback Section: Play, Pause, Stop, Fast Forward, and Fast Reverse buttons
  4. Audio Control Section: Volume up and down buttons, Mute button, and Audio button
  5. Function Section: Button for accessing the receiver's setup menu, sleep button, and others

Key Features and Functions

Some notable features and functions of the Onkyo RC-799M remote control include:

  1. Input Source Selection: The remote allows users to select from various input sources, such as BD, DVD, GAME, TV, and more.
  2. Playback Control: Users can control playback of media using the play, pause, stop, fast forward, and fast reverse buttons.
  3. Volume Control: The remote provides volume up and down buttons, as well as a mute button to quickly silence the audio.
  4. On-Screen Menu Access: The remote has a menu button that allows users to access the on-screen menu of their Onkyo device.
  5. Sleep Function: The remote has a sleep button that allows users to set a timer to turn off the device after a specified period.

Setup and Configuration

To use the Onkyo RC-799M remote control, users need to configure it to work with their Onkyo device. This typically involves:

  1. Battery Installation: Installing batteries into the remote control.
  2. Device Code Selection: Selecting the correct device code for the Onkyo device being controlled.
  3. IR Code Learning: Some Onkyo devices may require learning IR codes from the device itself.

Troubleshooting

If the remote control is not functioning properly, users can try:

  1. Battery Replacement: Replacing the batteries with fresh ones.
  2. Device Code Verification: Verifying that the correct device code is being used.
  3. IR Code Re-Learning: Re-learning the IR codes from the device.

Conclusion

The Onkyo RC-799M remote control is designed to provide users with a convenient and intuitive way to control their Onkyo home theater systems and audio components. With its standard layout and range of features, the remote control offers a comprehensive control solution for Onkyo device owners.

Recommendations

Limitations and Future Improvements

References

This report provides a comprehensive overview of the Onkyo RC-799M remote control, covering its features, functions, setup, and troubleshooting.

To program your Onkyo RC-799M Go to product viewer dialog for this item.

remote or troubleshoot issues, follow the steps below derived from official function guides and setup manuals. Programming Instructions You can program the Go to product viewer dialog for this item. to control external devices like TVs or DVD players.

Enter Program Mode: Press and hold the REMOTE MODE button you want to program (e.g., TV, BD/DVD) and the DISPLAY button simultaneously for about 3 seconds until the indicator light stays on . onkyo rc-799m remote manual

Enter Code: Within 30 seconds, use the number buttons to enter the 5-digit remote control code for your device's brand .

Confirm Success: If the code is accepted, the REMOTE MODE button will flash twice . If it flashes once slowly, the code was not successful, and you should try again or use a different code .

Note: The RECEIVER and ZONE 2 buttons cannot be programmed with external device codes . Common Remote Codes Sharp TV: 10818

MHL-enabled devices: 33101 (North America) or 32910 (Europe/Asia) Troubleshooting & Resets If your remote is unresponsive, try these steps:

Remote Reset: Press and hold the RECEIVER and HOME buttons until the indicator light comes on to reset the remote's internal settings .

Power Discharge: Remove the batteries and hold the Power button for 20 seconds to clear residual power before reinserting fresh AAA batteries .

Remote ID Check: If the remote still won't control the receiver, ensure the Remote ID on your receiver (found in Setup > Hardware) matches the remote's ID (typically set to ID 1) . Key Button Functions Q/Setup: Accesses advanced settings menus on your TV .

Home/Audio: Switches to the home menu or media playback controls .

Dimmer: Adjusts the brightness of the receiver's front display .

For a full list of brand-specific codes or to download the complete PDF, refer to the Onkyo RC-799M Function Guide or the Onkyo Remote Code Instruction manual.

The Onkyo RC-799M is a dedicated remote controller designed for specific Onkyo AV receivers, such as the HT-R391, TX-SR309, and HT-RC330. Most versions of this remote work "out of the box" for these receivers and do not require complex programming unless you are attempting to control external components like a TV or DVD player. Quick Setup & Programming

Initial Setup: Insert two 1.5V AA alkaline batteries. Point the remote directly at the receiver's sensor within a range of about 16 feet (5 meters). Programming for External Components: Onkyo RC-799M is a dedicated infrared (IR) remote

Hold down the REMOTE MODE button (e.g., TV, DVD) you wish to program while simultaneously holding the DISPLAY button for about 3 seconds. Wait for the REMOTE MODE button to light up.

Enter the 5-digit code for your device using the number keypad within 30 seconds.

If the code is accepted, the REMOTE MODE button will flash twice.

Resetting the Remote: To clear custom codes and return to factory settings, hold down the specific REMOTE MODE button and the L NIGHT button simultaneously for 3 seconds until the mode button flashes twice. Core Button Functions Remote Control Codes - Onkyo - YUMPU

5. Factory Reset: Return to Default Settings

If your remote is behaving erratically or you want to erase all programmed codes and macros, the manual provides a full system reset:

  1. Remove the batteries.
  2. Press and hold down the Power button (the red one on the top-left).
  3. While holding Power, reinsert the batteries.
  4. Continue holding Power for 10 seconds.
  5. The LCD screen will flash and then turn blank. Release the button.
  6. The remote is now reset to factory defaults. You will need to reprogram all devices.

Warning: This erases everything, including macro sequences and programmed device codes.

The Complete Guide to the Onkyo RC-799M Remote Manual: Functions, Programming, and Troubleshooting

If you own an Onkyo home theater receiver—particularly models from the late 2000s to early 2010s, such as the TX-SR507, TX-SR577, TX-SR606, or HT-R590—you are likely familiar with the Onkyo RC-799M remote control. This sleek, multi-brand universal remote is the beating heart of your home cinema experience. But when buttons stop responding, you need to program it for your TV, or you simply lose the original paper manual, finding a reliable Onkyo RC-799M remote manual becomes essential.

In this comprehensive guide, we have distilled all the critical information from the official manual. Whether you need to replace batteries, program cable box codes, or perform a factory reset, this article serves as your complete digital manual.

Learning Function (Copy from Another Remote)

The RC-799M can learn up to roughly 40 commands from any other IR remote. Here’s how:

  1. Place the RC-799M and your other remote head-to-head (2–4 inches apart).
  2. On RC-799M, press and hold the device button you want to assign (e.g., TV), then press Enter (the button lights).
  3. Press the button on RC-799M you want to teach (e.g., Play).
  4. Press and hold the corresponding button on the other remote until the RC-799M flashes twice.
  5. Repeat for other buttons, then press Enter to exit.

💡 To erase learned commands for a single device, repeat the process but press and hold Home instead of a button in step 4.

The "My Remote Is Broken" Troubleshooting Guide

The RC-799M is a soldier, but it has three common failure points. Here is how to fix them.

Problem 2: I want to reset the remote to factory settings.