To flash the Nokia 105 (TA-1304) using a PAC file, you need to use the SPD Upgrade Tool (also known as UpgradeDownload). This process is typically used to fix software hangs, logo loops, or to remove security codes. Prerequisites
Flash File: A compatible .pac firmware file for the TA-1304.
Flash Tool: Download the SPD Upgrade Tool (UpgradeDownload).
Drivers: Install the appropriate SPD (Spreadtrum) USB Drivers so your PC recognizes the device in boot mode.
Battery: Ensure the phone battery is charged to at least 60%. Step-by-Step Flashing Guide
Prepare the Tool: Extract the SPD Upgrade Tool and run UpgradeDownload.exe as an administrator.
Load the PAC File: Click the Load Packet (gear icon) button and select the .pac flash file you downloaded for your Nokia TA-1304.
Start the Process: Click the Start Downloading (play icon) button. The tool will now wait for the device to be connected. Boot into Flashing Mode: Turn off the phone completely.
Press and hold the Boot Key (usually the * (star) key or the center OK button for this model).
While holding the key, connect the phone to your PC via a USB data cable.
Monitor Flashing: Once the tool detects the phone, the flashing process will start automatically. You will see a progress bar.
Completion: Wait for the "Passed" or "Finish" message in green. Once finished, click the Stop button in the tool, disconnect the USB cable, and reinsert the battery. Troubleshooting Tips
Security Code: If you are only trying to reset a forgotten code, the default Nokia security code is 12345. nokia ta1304 flash file pac file fixed
Connection Issues: If the PC doesn't detect the phone, try a different USB port or cable, and verify that the SPD drivers are correctly installed in the Windows Device Manager.
Formatting/Reset: If you can access the menu, you can also perform a factory reset by dialing *#7370#.
The Nokia TA-1304 (Nokia 110 4G) is a reliable feature phone, but like any mobile device, its software can occasionally fail. Issues such as boot loops, being stuck on the logo, or security lockouts often require a fresh installation of the firmware.
To fix these issues, you need the Nokia TA-1304 Flash File (PAC file) and a compatible flash tool to reinstall the operating system. What is a PAC Flash File?
A .pac file is a firmware package designed specifically for devices powered by Spreadtrum (SPD) or Unisoc chipsets. Unlike Android smartphones that often use "scatter" files, feature phones like the Nokia TA-1304 rely on this single binary file to contain all the system data needed to restore the device to its factory state. Essential Tools for Flashing
Before you begin, ensure you have the following components downloaded and installed on your PC: Official Firmware: The tested Nokia TA-1304 PAC file.
Flash Tool: Use the SPD Upgrade Tool (also known as Research Download Tool) or professional boxes like Miracle Tool if you have them.
USB Drivers: Install the Unisoc/Spreadtrum USB drivers so your computer can recognize the phone in "Download Mode."
Battery Charge: Ensure the phone has at least 60% battery to prevent it from shutting down mid-process. Step-by-Step Guide to Fix Nokia TA-1304 1. Preparation
Download and extract the firmware and flash tool into a single folder on your desktop for easy access. Note: This process will wipe all data from the phone, including contacts and messages. 2. Loading the PAC File
Open the SPD Upgrade Tool (ResearchDownload.exe). Click on the Gear icon (Load Packet) in the top left corner. Browse to your extracted firmware folder and select the .pac file for the TA-1304. 3. Connecting the Device
Power off your Nokia TA-1304. Hold the boot key (usually the center "OK" button or the "Up" navigation key) while connecting it to your PC via a high-quality USB cable. 4. Start the Flashing Process To flash the Nokia 105 (TA-1304) using a
Once the tool detects the device, click the Play button (Start Downloading). The progress bar will begin to move as it writes the new firmware to the internal storage. 5. Completion
When the tool displays a green "Passed" message, disconnect the USB cable and remove the battery for a few seconds. Reinsert the battery and power on the device. The first boot may take a few minutes as the system initializes. Common Issues Fixed by This Method
Stuck on Nokia Logo: Resolves software corruption that prevents the phone from reaching the home screen.
Security Code Reset: If you've forgotten your lock code and the default 12345 does not work, flashing the PAC file will reset all security settings.
Dead Boot Repair: Fixes devices that refuse to turn on due to a corrupted operating system. Safety Warning
Flashing your device carries risks. Always use a verified and tested flash file to avoid "hard-bricking" your phone. If the tool displays an error like "Incompatible File," stop immediately and verify that your model is indeed the TA-1304.
Are you experiencing a specific error code (like "Timeout" or "Failed") during the flashing process that you need help troubleshooting?
Nokia 105 TA-1034 Flash File (Stock ROM) - RepairMyMobile.co
Nokia TA-1304 , commonly known as the Nokia 105 4G , often requires flashing when it encounters software issues like boot loops, "Contact Service" errors, or hangs on the logo. Because this device uses a Spreadtrum/UNISOC chipset the flashing process involves using a
with a specific tool rather than standard Android flashing software The Flashing "Fix" Process
To fix a bricked or malfunctioning Nokia TA-1304, follow these steps to use the PAC firmware file: Preparation
Ensure the device is powered off and the battery is charged to at least to avoid interruption. Download the official Nokia TA-1304 Flash File (PAC format) and extract it to your computer. Install the necessary SPD/UNISOC USB Drivers on your Windows PC. Tool Setup SPD Flash Tool (often called ResearchDownload.exe UpgradeDownload.exe Click on the Risks & cautions
(Load Packet) and browse to the extracted folder to select the firmware file. Initiating the Flash Play/Triangle icon (Start Downloading) in the tool. While the phone is powered off, hold the (usually the Center/Select
button or both volume buttons for some models) and connect it to the PC via USB cable.
The tool will detect the device and start the "Downloading" progress bar. Completion Wait for the "Passed" or "Success" message in green.
Disconnect the phone and restart it. The first boot may take several minutes. Critical Troubleshooting Notes Nokia 105 user guide: Keys and parts - HMD
Nokia TA-1304 Flash File (PAC File) Fixed: Comprehensive Repair Guide
The Nokia TA-1304, also known as the Nokia 105 (2019) Single SIM, is a reliable feature phone. However, like any device, it can encounter software issues such as being stuck on the Nokia logo, constant restarting, or forgotten security codes. Flashing the official PAC file (Stock ROM) is the most effective "fixed" solution to restore the device to its factory state. Why Flash the Nokia TA-1304?
Using a verified Nokia TA-1304 PAC file can resolve several common hardware-software conflicts:
Fix Boot Loop: Resolves the issue where the phone is stuck on the startup screen.
Remove Security Locks: Clears forgotten PINs, patterns, or passwords.
White Display/Dead Recovery: Fixes white screen issues or phones that won't power on due to corrupted firmware. Refresh OS: Updates the Series 30+ operating system. Essential Tools for Flashing
Before starting, ensure you have the following downloaded and installed on a Windows 7 or higher PC: Nokia 105 (TA-1304 SS) Pink -
Here’s a professional write-up for the Nokia TA-1304 Flash File (PAC File – Fixed) suitable for a firmware support site, blog, or technician forum.
Before diving into the flashing process, it is important to understand the file format.