Nokia Ta1304 Flash File Pac File ✦ Reliable & Validated

The Nokia TA-1304 (often associated with the Nokia 1.4 or similar entry-level models depending on the specific region/model variant) is usually a Spreadtrum/Unisoc-based device. A .pac file is the stock firmware format used by the SPD (Spreadtrum) Flash Tool.

Firmware File: You need the Nokia TA-1304_XXXX_PAC.zip file.

Flash Tool: You must use the SPD Factory Tool or SPD Upgrade Tool.

Driver: Install SPD USB Drivers (Spreadtrum drivers) on your computer. Steps to Flash Nokia TA-1304 (.pac file) nokia ta1304 flash file pac file

Download and Install: Download the firmware and the latest SPD Flash Tool.

Run Tool: Run the SPD Upgrade Tool (e.g., ResearchDownload.exe or UpgradeDownload.exe).

Load File: Click the first gear icon (Load Packet) and select the .pac file. The Nokia TA-1304 (often associated with the Nokia 1

Connect Device: Turn off the phone, hold the Volume Down button (or sometimes both volume buttons), and connect it to the PC via USB.

Start Flashing: The tool should automatically detect the device. Click the "Start" button (arrow icon) to begin flashing.

Complete: Wait for the progress bar to finish. A "Passed" message will appear, and the phone will restart. Step 6: Flashing Process

Important Note: Flashing firmware can erase all data on the device. Ensure you have backups and that the firmware version is correct for your exact model. If you'd like, I can: Help identify the correct flashing tool version to download

Explain how to bypass specific error messages during the process Provide a link to a tutorial on setting up the drivers Let me know what stage you are currently at. Flashing Custom Firmware on Nokia | Step by Step Guide

Step 6: Flashing Process

1. Once the device is detected, the tool will say something like "Waiting for device..." then change to "Downloading...".
2. You will see a progress bar moving.
3. Do NOT touch the phone, unplug the cable, or close the tool during this process.
4. If you see "Error: BROM" or "Authentication Failed," ensure you have the correct drivers installed and try a different USB port.

Step 3: Load the PAC File

1. In the SPD Tool interface, click on the Load Packet button (usually the first icon on the top left or a folder icon).
2. Browse to the folder where you extracted the Nokia TA1304 firmware.
3. Select the .pac file and click Open.
4. Wait for the tool to parse the file. You should see the firmware files listed in the tool window.

3. Why PAC File is Required for TA-1304

• The Nokia TA-1304 runs on a Unisoc SC9832E chipset.
• Standard tools like SP Flash Tool or QPST cannot flash PAC files directly.
• Only Nokia Care Suite (with specific LA (Local Authentication) dongle or online account) can flash PAC files correctly.
• Attempting to convert PAC to scatter is possible with third-party tools (e.g., PAC Unpacker) but the resulting files may not flash properly due to signature checks.

Step 7: Finish

1. Once the process is 100% complete, the tool will display a green circle or a message saying "Passed" or "Upgrade Complete".
2. Unplug the USB cable.
3. Power on the Nokia TA1304. (The first boot may take 5–10 minutes, so be patient).

Troubleshooting Common Errors

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | S_DL_GET_DRAM_SETTING_FAIL (5054) | DRAM initialization error (Wrong PAC file) | Download the correct PAC version for your hardware revision. | | STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060005) | Driver issue or USB port problem | Change USB port to USB 2.0. Reinstall Unisoc drivers. | | PAC file is corrupted | Incomplete download | Re-download the PAC file. Disable antivirus before extraction. | | Error: Mismatched Image | You are flashing a lower Android version | You cannot downgrade without a custom Auth file (security issue). | | Phone stays dead after flash | Battery completely drained | Leave the phone on a standard charger for 2 hours, then retry flashing. |