Nokia 130 (RM-1035) , which uses a MediaTek (MTK) chipset, finding the correct 64-bit USB driver is critical for tasks like flashing firmware or unlocking the device. GSM Forum remains a primary source for these specialized tools, though official links can sometimes be buried in long threads. Key Driver Details

: These drivers enable "BROM mode" (Boot ROM), allowing tools like Infinity BEST to communicate with the phone's preloader for flashing. Compatibility : Windows 7, 8, 10, and 11 (64-bit). Driver Type : Often referred to as MTK VCOM USB Preloader Drivers Installation Guide for 64-bit Systems

Installing these drivers on modern 64-bit versions of Windows (10/11) often requires manual steps due to security signatures: Disable Driver Signature Enforcement

: This is a mandatory first step because many community-distributed MTK drivers are not digitally signed by Microsoft.

Settings > Update & Security > Recovery > Advanced Startup > Restart now Navigate to

Troubleshoot > Advanced options > Startup Settings > Restart to "Disable driver signature enforcement". Manual Installation via Device Manager Connect your Nokia RM-1035 to the PC via USB. Device Manager . Look for an "Unknown Device" or "MTK Preloader". Right-click the device and select

Update Driver > Browse my computer for drivers > Let me pick from a list Select the category, then click and browse to your downloaded 64-bit driver folder. Troubleshooting

: If you see "Code 10" or "Device cannot start," try uninstalling the device from Device Manager (without deleting the software) and reconnecting it. Recommended Resources GSM Forum (External Link)

: Search for the "Nokia MTK Driver" or "RM-1035 flash driver" threads on for the most peer-reviewed version. Alternative Downloads : Sites like DriverIdentifier

provide direct links to the RM-1035 specific 64-bit INF files.

The Nokia 130 (RM-1035) requires specialized MediaTek (MTK) USB drivers for tasks like flashing firmware, removing screen locks, or repairing "dead" devices. Unlike standard data transfer drivers, these allow the computer to communicate with the phone's chipset in a pre-boot state. Essential Driver Downloads

For a 64-bit Windows environment, you typically need the MTK USB Serial Port Driver or the Nokia-specific MTK driver package:

MTK USB Serial Port Drivers (Nokia MTK devices): Available as a .zip file via AndroidFileHost.

Official Nokia USB Driver v1.4.0: Supports both 32-bit and 64-bit Windows; can be found on NokiaDriver.com.

Comprehensive MTK Driver Setup: A general installer for MediaTek devices is hosted at MTKDriver.com. Installation Guide for Windows 10/11 (64-bit)

Because these drivers are often not digitally signed, you must disable Driver Signature Enforcement before they will work. Disable Signature Enforcement: Hold Shift while selecting Restart from the Power menu.

Navigate to Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 or F7 to "Disable driver signature enforcement". Manual Driver Update:

Connect the phone and open Device Manager. It may appear as an "Unknown Device".

Right-click the device and select Update driver > Browse my computer for drivers > Let me pick from a list.

Choose Ports (COM & LPT), click Have Disk, and browse to the extracted driver folder.

Select the appropriate .inf file for your Windows version and click Yes on the security warning to finish. Hardware & Chipset Context Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum Link

In conclusion, the Nokia RM-1035 MTK USB driver 64 bit is a crucial software component for users of the Nokia RM-1035 device. 54.234.4.187

Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia

Connecting a Nokia 130 (RM-1035) to a modern 64-bit Windows computer often presents a challenge because the phone uses an older MediaTek (MTK) chipset. To perform tasks like flashing stock firmware, removing a passcode, or repairing software issues, you must install the specific Nokia RM-1035 MTK USB Driver.

This guide provides the necessary resources and step-by-step instructions to get your device recognized on Windows 10 or 11 (64-bit). 1. Where to Find the Driver (GSM Forum Links)

The GSM community has maintained specialized drivers for these older "Nokia MTK" feature phones for years. The following links are frequently cited on the GSM-Forum (GSMHosting) :

Direct Driver Link: You can find the specific MTK USB Serial Port Drivers for Nokia on AndroidFileHost.

Community Discussions: For troubleshooting specific to the RM-1035 model, check the Need Nokia 130 USB Driver thread on GSM-Forum.

Alternative Source: GSMXTeam provides a comprehensive Nokia USB Driver package that includes MTK and HMD connectivity drivers.

2. Critical Requirement: Disable Driver Signature Enforcement

On Windows 10 and 11 (64-bit), the system will automatically block these drivers because they lack a modern digital signature. You must disable this before installation: Go to Settings > Update & Security > Recovery. Under "Advanced startup," click Restart now.

Choose Troubleshoot > Advanced options > Startup Settings > Restart.

After the reboot, press 7 or F7 to "Disable driver signature enforcement". 3. Step-by-Step Installation Guide

Once signature enforcement is disabled, follow these steps to manually install the driver through Device Manager:

Extract the files: Unzip the downloaded driver package to your desktop.

Open Device Manager: Right-click the Windows icon and select Device Manager.

Add Legacy Hardware: Click on your PC name at the top, go to Action > Add legacy hardware.

Manual Selection: Choose "Install the hardware that I manually select from a list" and click Next.

Locate Driver: Select Show All Devices > Have Disk. Browse to the extracted folder and select the .inf file corresponding to the 64-bit (x64) version.

Confirm Installation: If a red warning box appears saying "Windows can't verify the publisher," click Install this driver software anyway. 4. Verifying the Connection To ensure the driver is working for flashing:

Open Device Manager and expand the Ports (COM & LPT) section.

Power off your Nokia RM-1035, hold the "OK" or navigation button, and connect the USB cable.

You should see MediaTek USB Port or MTK USB Serial Port appear briefly.

Note: The port may disappear and reappear; this is normal behavior for MTK devices in "Preloader" or "Flash" mode.

Are you planning to use a specific tool like Infinity-Box BEST or SP Flash Tool to flash your Nokia RM-1035?

Here are two post templates you can use for the Nokia RM-1035 (Nokia 130) MTK USB driver, tailored for or similar tech communities. Option 1: Direct Resource Sharing (Recommended) Nokia RM-1035 (Nokia 130) MTK USB Driver Windows 10/11 64-Bit Link Post Content: Hi everyone, I'm sharing the working MTK USB drivers for the Nokia RM-1035 (Nokia 130)

. Many users have trouble getting these devices recognized on Windows 10/11 64-bit systems because of driver signature issues. Driver Details: Nokia 130 (RM-1035) MediaTek (MTK) OS Support: Windows 7, 8, 10, 11 (32-bit & 64-bit) Download Link: [Insert your GSM Forum link or attachment here] Installation Note: For Windows 10/11 64-bit, you must Disable Driver Signature Enforcement before installation. You can follow this guide on How to Disable Driver Signature Enforcement to ensure the driver installs correctly. If you are using BEST (BB5 Easy Service Tool)

, these drivers are essential for flashing and service operations. Don't forget to press the button if this helps! Option 2: Request/Help Format Looking for Nokia RM-1035 MTK USB Driver for 64-Bit Windows Post Content: Hello GSM Forum members, I am trying to flash a Nokia RM-1035 (Nokia 130)

on my Windows 10 64-bit machine. I'm having trouble finding the specific MTK USB drivers that work with the 64-bit architecture. Does anyone have a verified link or attachment for the MTK drivers? I need them for: Flashing via BEST Dongle Reading Info/Unlock

Any help or a direct download link would be greatly appreciated. Thanks in advance! Key Tips for GSM Forum Posts: Use Attachments:

If you have the file, it is always better to upload it directly to the forum thread rather than using external links like Mega or Mediafire, which can expire. Mention Tools: Users often search for these drivers to use with BB5 Easy Service Tool (BEST)

, so mentioning it will help your post show up in more searches. Formatting: for the model name ( ) so it stands out to people scanning the forum.

Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia

Here’s a step-by-step guide for finding and installing the Nokia RM-1035 (Nokia X2 Dual SIM) MTK USB driver on a 64-bit Windows PC, including the typical source from GSM Forum links.

Key Features (bulleted)

• 64-bit Windows compatible: Supports Windows 7, 8, 8.1, 10, and 11 (64-bit).
• MTK chipset support: Optimized for MediaTek-based Nokia RM-1035 models.
• Plug-and-play installation: Simple installer with signed/unsigned driver support and manual install instructions.
• Stable connectivity: Reliable connection for flashing tools (SP Flash Tool, Miracle, CM2) and recovery operations.
• Driver signature bypass: Includes instructions for temporarily disabling driver signature enforcement when needed.
• Uninstall utility: Clean removal tool to avoid driver conflicts.
• Boot-mode detection: Auto-detects Preloader/Fastboot/Download mode for proper tool usage.
• Low footprint: Minimal background services; small install size.
• Community support: Direct GSM Forum link for downloads, mirrors, and user-contributed fixes.

The Ultimate Guide to Nokia RM-1035 (Nokia X2) MTK USB Driver 64 Bit: Download, Installation, and GSM Forum Links

Part 1: Understanding the Nokia RM-1035 (Nokia X2)

Before diving into drivers, let's clarify the hardware. The Nokia RM-1035 features:

• Processor: MediaTek MT6582M (Quad-core Cortex-A7)
• OS: Android 4.3 (Jelly Bean) upgradable to 4.4.2
• Interface: Micro-USB for charging, data transfer, and firmware flashing.

Unlike Qualcomm-based Nokias, the RM-1035 uses an MTK (MediaTek) preloader and USB VCOM port. To flash custom recoveries, unlock the bootloader, or restore stock firmware using SP Flash Tool, Windows must recognize the phone when it is powered off. This requires the MTK USB VCOM Driver.

Step C – Alternative official MediaTek source:

• Download from MediaTek’s official support (rare) or trusted tool sites like SP Flash Tool bundles.

Step B – Common working link pattern (example – not guaranteed permanent):

https://www.gsmforum.net/threads/mtk-usb-drivers-all-mediatek-usb-drivers.12345/

Look for a post containing “MTK USB Drivers (x64)” or “SP_Driver_V2.0”.

Why 64-Bit?

Most modern laptops and desktops run 64-bit versions of Windows (x64). The generic MTK drivers provided on many forums are often 32-bit only, leading to the dreaded "This driver is not intended for this platform" error. The 64-bit MTK USB driver is specifically signed and compiled for Windows x64 environments.