Nokia 3310 (TA-1030) USB MTK Drivers The Nokia 3310 (2017) TA-1030 runs on a MediaTek (MTK) chipset. To connect it to a PC for flashing firmware, repairing IMEI, or data transfer, you need the specific MTK VCOM drivers. 📦 Driver Essentials Chipset: MediaTek MT6261 Driver Type: MTK USB VCOM / Preloader OS Compatibility: Windows 7, 8, 10, 11 (32/64-bit) Main Use: Firmware flashing via MTK Flash Tool 🛠 Installation Steps
Disable Driver Signature Enforcement: On Windows 10/11, this is required for manual INF installation.
Download Driver: Get the "MediaTek All-in-One USB Driver" package. Device Manager: Open devmgmt.msc. nokia 3310 ta-1030 usb driver mtk
Connect Phone: Power off the phone, hold the 'center' or 'up' key, and plug in the USB.
Update Driver: Quickly right-click the appearing "MTK" or "Unknown" device and select the downloaded .inf file. ⚠️ Connection Tips Phone State: Must be completely powered OFF. Nokia 3310 (TA-1030) USB MTK Drivers The Nokia
Boot Key: Often requires holding the 'OK' button while plugging in.
Cable: Use a high-quality micro-USB data cable (not just a charging cable). Port: Use a USB 2.0 port for better stability over USB 3.0. Reconnect phone (power off)
🚀 Pro Tip: If the device connects and immediately disconnects, that is normal behavior for MTK Preloader mode; it only stays active when a flashing tool is "listening."
MediaTek USB VCOM Port (COM5)
Under specific lawful circumstances, rewriting an IMEI (if lost after a flash) requires the Nokia 3310 TA-1030 USB driver MTK to establish a serial connection.