Nalco 2584 Sds [hot] May 2026

NALCO® 2584 Safety Data Sheet (SDS) identifies this product as a hazardous, highly alkaline liquid used in industrial water treatment. It is classified as corrosive to metals and causes severe skin burns and eye damage. 1. Product Identification Product Name: NALCO® 2584. Manufacturer: Ecolab International / Nalco Water. Appearance: Colourless, odourless liquid. 2. Hazard Identification

Nalco 2584 is classified under the Globally Harmonized System (GHS) with the following hazards: Signal Word: Hazard Statements: May be corrosive to metals. Harmful if swallowed. Causes severe skin burns and eye damage. Precautionary Measures:

Do not breathe mists or vapours. Wear protective gloves, clothing, and eye/face protection. Wash hands thoroughly after handling. 3. Physical & Chemical Properties Value/Description pH (5% solution) 14 (Highly Alkaline) 12.6 lb/gal (1.5 - 1.53 @ 20°C) Freezing Point Boiling Point Solubility Completely soluble in water Flash Point Does not flash 4. First Aid Measures Eye Contact:

Rinse immediately with plenty of water, including under eyelids, for at least 15 minutes. Seek immediate medical attention (call a POISON CENTER or doctor). Skin Contact:

Wash off immediately with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Ingestion: Rinse mouth. Do induce vomiting. Seek immediate medical attention. Inhalation:

Remove victim to fresh air and keep at rest in a position comfortable for breathing. 5. Handling & Storage

Use only with adequate ventilation. Avoid contact with skin, eyes, and clothing.

Store in a cool, well-ventilated place. Keep in original, corrosive-resistant containers with a resistant inner liner. Keep container tightly closed. Stability:

Stable under normal conditions but may react dangerously with incompatible materials like strong acids. 6. Accidental Release & Disposal Spill Response:

Absorb spillage with inert material to prevent material damage.

Dispose of contents and container in accordance with local, regional, and national regulations. incompatible materials Nalco 2584 Safety Data Sheet | PDF - Scribd

NALCO 2584 is a concentrated alkaline liquid used primarily as an alkalinity source and pH adjuster in boiler water treatment and potable water systems. It is classified as a highly corrosive material due to its high concentration of strong bases. Composition and Identification

According to the Nalco 2584 Safety Data Sheet, the product is a mixture of two primary active ingredients:

Sodium Hydroxide (CAS 1310-73-2): 30% – 60% concentration.

Potassium Hydroxide (CAS 1310-58-3): 10% – 30% concentration. Hazard Identification

The product carries a "Danger" signal word and the following GHS classifications:

Corrosive to Metals: Category 1 (May be corrosive to metals). Skin Corrosion: Category 1 (Causes severe skin burns). Serious Eye Damage: Category 1 (Causes serious eye damage). NFPA Rating: Health 3, Flammability 0, Instability 0. Physical and Chemical Properties Appearance: Colourless, odourless liquid. pH: 14 (at a 5% solution), indicating extreme alkalinity. Solubility: Completely soluble in water. Freezing Point: -23 °C (-9.4 °F). Density: Approximately 12.6 lb/gal. Regulatory Approvals and Use Cases

Food Industry: This product is NSF registered (Category G1, G5, G6) for treating potable water systems and boilers in food processing areas, provided the steam does not result in food adulteration.

FDA Compliance: It meets 21 CFR 173.310 requirements for boiler water additives where steam may contact food.

Application: It is frequently used in de-mineralization plant pre-treatment and as a supplemental alkalinity source to prevent corrosion. Safety and Handling Precautions

Personal Protective Equipment (PPE): Safety goggles, a full face shield, and chemical-resistant gloves (Nitrile or Butyl rubber) are mandatory.

Storage: Must be stored in original, labeled containers and kept away from strong acids and metals like aluminum, copper, or brass, which it can corrode.

Spills: Large spills should be diked and absorbed with non-combustible material like sand or earth. Nalco 2584 Safety Data Sheet | PDF - Scribd

A Safety Data Sheet (SDS) for Nalco 2584 is a critical document for industrial facilities using this high-performance alkaline treatment. Primarily used in boiler systems, this chemical helps maintain optimal water chemistry by adjusting alkalinity and controlling pH levels.

Below is an overview based on standard Nalco 2584 Safety Data Sheet data and regulatory filings. Product Overview and Usage

Nalco 2584 is a liquid alkaline reagent designed for industrial water treatment. Its primary functions include:

Alkalinity Adjustment: Prevents acid-based corrosion in boiler feedwater systems.

pH Control: Maintains a stable pH environment to protect expensive heating and cooling equipment.

Food Industry Compatibility: It is NSF Registered (Category G1, G5, G6), meaning it is acceptable for treating boilers or steam lines in food processing facilities where steam may contact edible products. Hazard Identification

According to GHS classification, Nalco 2584 is classified as a hazardous substance due to its corrosive nature. Hazard Category Classification Hazard Statement Physical Corrosive to metals (Category 1) May be corrosive to metals Health Skin Corrosion (Category 1) Causes severe skin burns Health Serious Eye Damage (Category 1) Causes serious eye damage Chemical Composition

The effectiveness of Nalco 2584 stems from its concentrated alkaline components:

Sodium Hydroxide (CAS 1310-73-2): 30% – 60% concentration.

Potassium Hydroxide (CAS 1310-58-3): 10% – 30% concentration. Safe Handling and Storage

Due to its high alkalinity, strict safety protocols must be followed during use:

Nalco 2584 - щелочной реагент для водоподготовки

What is Nalco 2584 SDS?

Nalco 2584 SDS is a Safety Data Sheet (SDS) for a specific product, Nalco 2584, which is a water treatment chemical used in various industries such as oil and gas, power, and mining. The SDS provides critical information on the safe handling, use, storage, and disposal of the product.

Product Description:

Nalco 2584 is a proprietary water treatment chemical developed by Nalco, an Ecolab company. It is designed to control scale, corrosion, and fouling in industrial water systems. The product is a specially formulated blend of chemicals that helps to prevent the formation of scales, such as calcium carbonate and calcium sulfate, and also provides corrosion protection for metal surfaces. nalco 2584 sds

SDS Sections:

The Nalco 2584 SDS includes the following sections:

  1. Identification: Product identifier, synonyms, and recommended use.
  2. Hazards Identification: Hazard classification, warning statements, and precautionary statements.
  3. Composition/Information on Ingredients: Composition of the product, including percentages of each ingredient.
  4. First Aid Measures: Procedures for dealing with exposure to the product, including skin and eye contact, inhalation, and ingestion.
  5. Fire-Fighting Measures: Information on suitable extinguishing media, products of combustion, and special fire-fighting procedures.
  6. Accidental Release Measures: Procedures for responding to spills, leaks, or releases of the product.
  7. Handling and Storage: Precautions for safe handling and storage of the product.
  8. Exposure Controls/Personal Protection: Recommendations for personal protective equipment (PPE) and exposure limits.
  9. Physical and Chemical Properties: Physical and chemical properties of the product, such as appearance, odor, pH, and flash point.
  10. Stability and Reactivity: Information on the stability and reactivity of the product, including conditions to avoid and incompatible materials.
  11. Toxicological Information: Toxicological data and information on the product's effects on human health.
  12. Ecological Information: Information on the product's environmental fate, toxicity, and potential impacts on aquatic and terrestrial organisms.
  13. Disposal Considerations: Recommendations for disposal of the product and contaminated materials.
  14. Transport Information: Information on the product's transportation requirements, including classification, labeling, and packaging.

Key Safety Information:

Where to Find the SDS:

The Nalco 2584 SDS can be found on various sources, including:

It is essential to consult the SDS before handling Nalco 2584 or any other chemical product to ensure safe handling, use, and disposal.

Nalco 2584 is a specialized chemical treatment used primarily for water systems in food processing environments. Understanding its Safety Data Sheet (SDS) is essential for ensuring both operational efficiency and personnel safety. Overview of Nalco 2584

Nalco 2584 is a liquid chemical blend designed for the treatment of potable water systems, cooling systems, and boilers. It is particularly valuable in food and beverage industries because it carries NSF Registration (Category G1, G5, and G6), meaning it is acceptable for use in and around food processing areas where the treated water or steam may come into contact with edible products. Key Chemical and Physical Properties

Based on its latest Nalco 2584 Safety Data Sheet, the product has the following characteristics: Appearance: Colourless, odourless liquid.

pH Level: 14 (at 5% concentration), indicating it is a highly alkaline or corrosive substance. Density: Approximately 1.5 - 1.53 g/cm³ (12.6 lb/gal). Solubility: Completely soluble in water. Boiling Point: 145 °C (293 °F). Composition and Ingredients

The hazardous components typically identified in Nalco 2584 include: Sodium Hydroxide (CAS 1310-73-2): 30% - 60% concentration.

Potassium Hydroxide (CAS 1310-58-3): 10% - 30% concentration.

Both ingredients are strong bases, contributing to the product's high pH and corrosive nature. Safety Hazards and Health Effects

According to its hazard characterization, Nalco 2584 is considered a high human hazard.

Skin and Eyes: Can cause severe burns and moderate to severe irritation upon contact.

Inhalation: Prolonged inhalation of vapors or mists may be harmful to the respiratory system.

Ingestion: May cause nausea, vomiting, or central nervous system depression depending on exposure levels. Handling and Storage Recommendations

To maintain a safe workplace, follow these Ecolab safety guidelines:

Personal Protective Equipment (PPE): Always wear chemical-resistant gloves, goggles, and a face shield when handling the concentrate.

Ventilation: Use only with adequate ventilation to avoid breathing in vapors.

Storage: Keep the container tightly closed in a cool, well-ventilated area. Protect the product from freezing, as its freezing point is approximately -23 °C (-9.4 °F).

Spill Response: Absorb any spillage to prevent material damage and dispose of it at an approved waste disposal plant. Regulatory Compliance Nalco 2584 meets several North American standards:

FDA: Complies with 21 CFR 173.310 for boiler water additives.

NSF: Registered for use in potable water (G1) and steam lines (G6) in food plants.

Health Canada: Issued a "no objection" letter for use in steam that may contact food surfaces. Nalco 2584 Safety Data Sheet | PDF - Scribd

1. Product OverviewNALCO 2584 is a mixture primarily composed of strong alkaline agents: Sodium Hydroxide (30–60%) and Potassium Hydroxide (10–30%). It is officially registered with NSF International under category codes G1, G5, and G6, making it acceptable for treating potable water systems and retort water in food processing environments. 2. Hazard Identification Physical Hazards: Highly corrosive mixture. Health Risks:

Eyes: Can cause severe damage, redness, and temporary blindness. Skin: Direct contact causes severe burns and irritation.

Inhalation: May irritate the respiratory system; hyper-reactive individuals may experience asthmatic symptoms.

Environmental Risk: Characterized as low hazard to the environment, though it may be classified as hazardous waste (RCRA) upon disposal due to its pH. 3. Safety & Handling Measures

First Aid: Immediate action is required. Eyes and skin must be rinsed with water for at least 15 minutes. If swallowed, do not induce vomiting; rinse the mouth and seek immediate medical attention.

Personal Protection: Use of local exhaust ventilation is recommended. Personnel should wear chemical-resistant gloves, safety goggles, and, in high-concentration areas, multi-contaminant respiratory cartridges.

Storage: Should be handled in a fume hood for laboratory samples and kept in a secure, well-ventilated space. 4. Regulatory Compliance

Food Safety: Facilities must ensure use does not result in food adulteration as per HACCP plans.

Record Keeping: Employers must maintain SDS/exposure records for at least 30 years to comply with OSHA standards. NALCO 2548

Nalco 2584 is a specialized chemical treatment, and its Safety Data Sheet (SDS) is a critical guide for anyone handling it. Based on official documentation , here is the "story" of how to safely manage this product. The Profile: What is Nalco 2584?

Nalco 2584 is a chemical compound primarily used for water treatment, specifically in potable water systems

, cooling systems, and retort water in food processing areas. It has achieved NSF International Registration

, meaning it is approved for use in and around food processing as long as it's used correctly. The Danger: Why Care is Essential This product is classified as a Category 1 Corrosive NALCO® 2584 Safety Data Sheet (SDS) identifies this

to metals and skin. Its GHS labeling includes the signal word due to several high-level risks: Severe Burns: It causes severe skin burns and permanent eye damage. Toxic Reactions:

If it comes into contact with acids, it can liberate toxic gases. Health Hazards:

It is harmful if swallowed and can irritate the respiratory system. The Protocol: Safe Handling & Response

To "tell the story" of a safe workday with Nalco 2584, follow these three phases of protection: Action Required Preparation Wear full PPE:

Protective gloves, clothing, safety goggles, and face protection. Keep the product only in its original container. Immediate Action:

If it touches skin or eyes, flush with water for at least 15 minutes. Do NOT induce vomiting

if swallowed; rinse the mouth and call a Poison Center immediately. Containment:

Absorb any spillage to prevent material damage. Dispose of the waste at an approved plant. Storage and Stability Stability:

It is stable under normal conditions but must be kept away from strong acids to avoid dangerous reactions. Prevention:

Protect the product from freezing and ensure the area has adequate ventilation to avoid breathing in vapors. Connecticut College

If you need a copy of the most current SDS for your specific region, you can request one directly from Nalco/Ecolab as they are often not fully available for public download. specifically to print for a workspace? Nalco 2584 Safety Data Sheet | PDF - Scribd

The Importance of Safety Data Sheets: A Comprehensive Guide to Nalco 2584 SDS

In the world of industrial chemicals, safety and responsible handling are of utmost importance. One crucial tool that facilitates the safe handling and management of chemicals is the Safety Data Sheet (SDS). In this article, we will focus on Nalco 2584 SDS, a widely used chemical product in various industries.

What is Nalco 2584?

Nalco 2584 is a chemical product developed by Ecolab, a leading provider of water, hygiene, and energy technologies. It is a type of corrosion inhibitor used to protect equipment and piping systems from corrosion in various industrial applications, including oil and gas, power generation, and chemical processing.

The Significance of Safety Data Sheets (SDS)

A Safety Data Sheet (SDS) is a document that provides critical information on the safe handling, use, storage, and disposal of a chemical product. The SDS is designed to communicate health, safety, and environmental information to workers, emergency responders, and other stakeholders who may come into contact with the chemical.

The SDS is a crucial component of a chemical management system, as it:

  1. Identifies potential hazards: The SDS provides information on the potential health, safety, and environmental hazards associated with the chemical product.
  2. Provides safe handling procedures: The SDS offers guidance on how to handle the chemical safely, including personal protective equipment (PPE) requirements, storage conditions, and emergency procedures.
  3. Ensures compliance with regulations: The SDS helps organizations comply with regulatory requirements, such as OSHA's Hazard Communication Standard (HCS) and the United Nations' Globally Harmonized System of Classification and Labelling of Chemicals (GHS).

Nalco 2584 SDS: What You Need to Know

The Nalco 2584 SDS provides detailed information on the product's composition, hazards, and safe handling procedures. Here are some key points to take away from the SDS:

Best Practices for Working with Nalco 2584

To ensure safe handling and management of Nalco 2584, follow these best practices:

  1. Read and understand the SDS: Familiarize yourself with the Nalco 2584 SDS and ensure that all personnel handling the product have access to it.
  2. Train personnel: Provide training on the safe handling, use, and storage of Nalco 2584, including emergency procedures.
  3. Use personal protective equipment (PPE): Ensure that all personnel handling Nalco 2584 wear required PPE, including gloves, eye protection, and respirators.
  4. Store and handle the product properly: Store Nalco 2584 in a well-ventilated area, away from incompatible materials, and handle it in accordance with the SDS guidelines.

Conclusion

The Nalco 2584 SDS is a critical document that provides essential information on the safe handling, use, and storage of this chemical product. By understanding the hazards associated with Nalco 2584 and following the guidelines outlined in the SDS, organizations can minimize risks and ensure a safe working environment. Remember to always read and understand the SDS, train personnel, use PPE, and store and handle the product properly to ensure safe and responsible management of Nalco 2584.

Additional Resources

For more information on Nalco 2584 and its SDS, please refer to the following resources:

By prioritizing safety and responsible chemical management, organizations can ensure a safe and healthy work environment, minimize environmental impacts, and maintain regulatory compliance.

NALCO 2584 is a chemical treatment solution primarily used for potable water systems, cooling and retort water, and boiler/steam lines within food processing facilities. It is registered with NSF International (Category Codes G1, G5, G6) and complies with FDA regulations (21 CFR 173.310) for boiler water additives. Safety Data Sheet (SDS) Overview

The safety profile of Nalco 2584 indicates significant handling hazards, particularly due to its high alkalinity.

Hazard Classification: It is classified as Corrosive to Metals (Category 1) and causes severe skin burns and serious eye damage (Category 1). Signal Word: DANGER. Key Hazards: May be corrosive to metals. Causes severe skin burns and eye damage.

May cause respiratory irritation or asthma symptoms if inhaled. Harmful if swallowed. Physical and Chemical Properties Appearance: Colorless, odorless liquid. pH: 14 (highly alkaline) at 5% concentration. Density: 12.6 lb/gal. Solubility: Completely soluble in water. Boiling Point: 145 °C (293 °F). Safe Handling and First Aid

PPE Requirements: Standard safety protocols require wearing chemical splash goggles, a face shield, protective gloves (such as nitrile or neoprene), and protective clothing.

Storage: Store only in the original, corrosion-resistant container. Keep the container tightly closed in a well-ventilated area. First Aid Measures:

Eye Contact: Immediately flush with water for at least 15 minutes and seek urgent medical attention.

Skin Contact: Remove contaminated clothing and rinse skin thoroughly with water.

Ingestion: Rinse mouth but do not induce vomiting. Call a poison center or doctor immediately.

For the most current and official version of the document, you can request an SDS directly through the Ecolab/Nalco Water SDS portal. Nalco 2584 Safety Data Sheet | PDF - Scribd

Understanding NALCO 2584: A Guide to Safety and Compliance In industrial water treatment, maintaining the integrity of potable water systems and cooling lines is critical for both operational efficiency and safety. One of the primary tools used for this purpose is NALCO 2584. This guide breaks down the essential safety data sheet (SDS) information to help your team handle this chemical responsibly. What is NALCO 2584? Key Safety Information:

NALCO 2584 is a specialized chemical compound developed by the Nalco Company for water treatment. It is primarily used in potable water systems, cooling systems, and retort water systems. Key certifications include:

NSF Registration: Approved as a G1, G5, and G6 compound, making it acceptable for use in and around food processing areas provided it does not directly adulterate food.

Kosher/Pareve Certification: Certified by the Chicago Rabbinical Council for year-round use. Critical Safety Profile

According to its Safety Data Sheet (SDS), NALCO 2584 is a colourless, odourless liquid with a high pH of 14 at a 5% concentration, indicating it is strongly alkaline. Hazard Identification:

Corrosivity: Due to its high pH, it contains components like Sodium Hydroxide and Potassium Hydroxide, which are highly corrosive.

Health Risks: While health injuries are not expected under normal use, direct contact can cause irritation or discomfort if swallowed.

Reactivity: It is not flammable but can react dangerously if mixed with acids. Handling and Storage Best Practices

To ensure a safe workplace, follow these guidelines sourced from Ecolab/Nalco Water protocols:

Protective Gear: Always wear chemical goggles, protective gloves, and suitable clothing to prevent skin and eye contact.

Ventilation: Use only in well-ventilated areas to maintain airborne levels below recommended limits. Storage: Store in a cool, dry place out of direct sunlight.

Keep away from acids: Storing near acids can cause dangerous reactions.

Ensure containers are tightly closed and clearly labeled when not in use.

Hygiene: Wash hands thoroughly after handling and before eating, drinking, or smoking. Emergency Procedures

Eye Contact: Rinse immediately with plenty of water and seek medical advice. Skin Contact: Wash immediately with soap and water.

Spills: Ensure adequate ventilation and contain the material to prevent it from reaching waterways.

For the most up-to-date and specific safety information, always refer to the physical SDS provided with your shipment or contact Nalco Water directly. Nalco 2584 Safety Data Sheet | PDF - Scribd

Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put. yourself at risk of injury. Nalco 2584 Safety Data Sheet | PDF - Scribd

The Mysterious Case of NALCO 2584: A Deep Dive into the World of Industrial Chemicals

It was a typical Monday morning at the local water treatment plant in the small town of Oakdale. The operators were busy preparing for another day of ensuring the town's water supply was safe and clean. However, little did they know that their routine was about to be disrupted by a mysterious chemical known as NALCO 2584.

NALCO 2584 was a product of Ecolab, a leading global provider of water, hygiene, and energy technologies. The chemical was listed on the Safety Data Sheet (SDS) as a "Corrosion Inhibitor/Scale Inhibitor" used in industrial water treatment applications.

The Oakdale water treatment plant had been using NALCO 2584 for months without incident. However, on this particular day, Operator Joe Thompson noticed something unusual. As he was handling the chemical, he felt a strange tingling sensation on his skin. He brushed it off as a minor irritation, but as the day progressed, more and more employees began to report similar symptoms.

The plant's supervisor, Mark Davis, immediately called Ecolab's customer support line to inquire about the chemical's properties and potential hazards. The representative provided him with the SDS for NALCO 2584, which listed the chemical's composition, hazards, and first aid measures.

According to the SDS, NALCO 2584 contained a proprietary blend of phosphates, phosphonates, and other inorganic compounds. The chemical was classified as a mild irritant, with possible skin and eye irritation listed as potential hazards.

However, as Mark and Joe reviewed the SDS, they noticed something peculiar. Section 3, "Composition/Information on Ingredients," listed a specific chemical compound known as 2-Ethylhexylphosphonic acid, mono-2-ethylhexyl ester (CAS# 87591-46-6). This compound was not commonly used in industrial applications and seemed to raise more questions than answers.

Mark and Joe decided to dig deeper. They contacted the manufacturer, Ecolab, and asked for more information on the chemical's properties and potential risks. After several phone calls and emails, they finally received a response from a senior Ecolab representative.

The representative revealed that NALCO 2584 was indeed a complex chemical formulation, designed to prevent corrosion and scaling in industrial water systems. However, the representative also warned that the chemical's proprietary nature made it difficult to disclose its exact composition.

As the investigation continued, Mark and Joe discovered that NALCO 2584 had been linked to several reported cases of skin and eye irritation, as well as respiratory problems, in various industrial settings. They began to suspect that the chemical might be more hazardous than initially thought.

The Oakdale water treatment plant immediately stopped using NALCO 2584 and implemented stricter safety protocols for handling industrial chemicals. Mark and Joe shared their findings with the town's administration, and soon, the local government launched a comprehensive review of the town's industrial chemical inventory.

The incident shed light on the often-overlooked world of industrial chemicals and the importance of thorough safety protocols. As Mark and Joe reflected on their experience, they realized that even seemingly innocuous chemicals like NALCO 2584 could pose significant risks if not handled properly.

The NALCO 2584 SDS, once a mundane document, had become a crucial tool in uncovering the truth behind this mysterious chemical. As the Oakdale water treatment plant continued to operate safely, Mark and Joe made sure to always scrutinize the SDSs of all chemicals they used, knowing that even the most ordinary-looking documents could hold extraordinary secrets.

SDS Details for NALCO 2584:

Recommendations:

References:

Quick guide — Nalco 2584 SDS

Product Safety Write-Up: Nalco 2584

Hazard Statements (H-Statements)

Practical workplace actions

Part 5: Firefighting and Accidental Release (Sections 5 & 6)

Part 2: Hazards Identification – Section 2 (The Critical Warning Section)

When you open the Nalco 2584 SDS, Section 2 is where you must focus first. This section dictates the PPE (Personal Protective Equipment) and immediate risks.

Part 4: First Aid Measures – Section 4 (What to Do in an Emergency)

When searching for the Nalco 2584 SDS, many users are actually looking for emergency response procedures. Here is a summary of what you will find:

| Exposure Route | Immediate Action | | :--- | :--- | | Inhalation | Remove victim to fresh air. If breathing is difficult, administer oxygen. If breathing stops, give artificial respiration. Seek medical attention. | | Skin Contact | Wash off immediately with plenty of water for at least 15 minutes. Remove contaminated clothing. If irritation persists, get medical help. | | Eye Contact | Hold eyelids apart and flush with copious amounts of water for 15–20 minutes. Seek immediate medical attention – corneal damage can occur. | | Ingestion | Do NOT induce vomiting. Rinse mouth with water. Never give anything by mouth to an unconscious person. Poison control should be called immediately. |

Critical advice: The SDS will explicitly warn against neutralizing agents on the skin or eyes. Do not apply creams, ointments, or acid/base neutralizers without medical supervision.

Part 1: What is Nalco 2584? (Product Identity – Section 1 of SDS)

Before diving into the SDS, it is crucial to understand what the product is. Nalco 2584 is typically described as a liquid polymeric scale inhibitor. Its primary function is to prevent the precipitation of hardness salts (like calcium carbonate and calcium sulfate) onto heat transfer surfaces.

Key identifiers from Section 1 of the SDS include:

Why this matters: The SDS specifies that this product is for industrial use only. Using it outside of recommended parameters (e.g., in potable water systems without downstream approval) violates the SDS guidelines.