Myaal10 Firmware Full ((free)) -

Deep Guide — MYAAL10 Firmware (Full)

Data Loss: Flashing a full firmware will wipe all user data (factory reset equivalent).
IMEI/Baseband Loss: Incorrect firmware version can corrupt the modem partition, leading to "No Service."
Permanent Brick: Using an incomplete or cross-model firmware (e.g., MYA-LX9 on an MYA-AL10) can hard-brick the device.
Warranty Void: Manual flashing usually voids any remaining manufacturer warranty.

Verify device model: Settings > About phone/tablet or printed on device; confirm matches firmware.
Download official/full firmware from manufacturer or trusted source. Confirm file integrity via checksums.
Install USB drivers on PC. For Windows, disable driver signature enforcement if needed to install VCOM drivers.
Install platform-tools (ADB/Fastboot). Add to PATH or use their folder.
Make a backup:
- Use ADB: adb backup -all (may not capture everything).
- Pull important files: adb pull /sdcard/DCIM etc.
- If possible, export contacts, accounts, and app data.

Step 1: Prepare the Files

Download the Firmware Scatter file (usually a zip file).
Extract the zip file to a folder on your desktop. You should see a file named MT6737T_Android_scatter.txt (or similar).

Step 2: Configure SP Flash Tool

Open flash_tool.exe (Run as Administrator).
Click the Download tab at the top.
Click the "Choose" (or Scatter-loading) button.
Navigate to your extracted folder and select the .txt (scatter) file.
The tool will populate a list of partitions (Preloader, lk, boot, recovery, system, etc.).
- Ensure "Preloader" is CHECKED. This is essential for a full flash.

Step 3: Connection Settings

In SP Flash Tool, verify the "Download Only" option is selected in the dropdown menu (top right). Do not use "Format All + Download" unless you are sure, as this erases the IMEI/NVRAM.
Click the large Download button (green arrow icon) in the top bar.
The tool is now waiting for the device.

Step 4: Flashing the Phone

Turn OFF the phone completely. Do not connect it to the PC yet.
Remove the battery if possible (U15 Pro has a removable back, remove the battery for the cleanest connection).
Connect the phone to the PC via USB while holding the Volume Down button (or just plug it in if the battery is removed).
Watch the SP Flash Tool. It should detect the phone and a progress bar will appear.
If using a battery: Put the battery back in while connected.
Wait for the process to finish. A green circle with a checkmark will appear saying "Download Ok".

Step 5: Booting Up

Unplug the phone.
Re-insert the battery if removed.
Power on the device. The first boot takes 5–10 minutes. Do not panic. This is normal as the system builds the Dalvik/Art cache.

A: Not usually. Stock full firmwares are unrooted. Check the source description – some custom builds include Magisk. myaal10 firmware full