Multistar Dvr Default Password - Work
The most common default password for Multistar DVR systems is 123456 or blank (no password). These units often use generic "H.264" or "XMeye" firmware common to several budget manufacturers. Common Default Credentials
If the standard options do not work, try these common manufacturer defaults: Username: admin (most common) or root. Passwords: 123456 admin 1111 000000 1234 How to Reset if Default Fails
If the default credentials have been changed and you are locked out, you can try these methods to regain access:
Physical Reset Button: Look for a small recessed button on the back or inside the motherboard. Press and hold it for 10–30 seconds while the device is powered on to restore factory settings. multistar dvr default password work
CMOS Battery Removal: Disconnect the power and remove the small silver coin-cell battery (CR2032) from the motherboard for about 10 minutes. This sometimes resets the system clock and clears the temporary password.
Password Generator Apps: Some generic DVRs can be unlocked using "Super Password" generators. These apps require the current system date shown on your DVR screen to generate a one-time master code.
Firmware Recovery: In some cases, inserting a USB stick with the correct firmware file can trigger an automatic reset during the boot process. The most common default password for Multistar DVR
Note: For older Multistar models, technical users have sometimes found success by shorting the "G1" jumper pins on the circuit board for 60 seconds during startup. Use caution with this method as it involves internal hardware.
3. What If the Default Password Doesn’t Work?
If the default credentials fail, someone (or the installer) likely changed the password. Try these steps:
What Is the Default Password for Multistar DVR?
For the vast majority of Multistar DVR models (including H.265, 4K, and AHD models), the default login credentials are: admin 123456 888888 666666
| Field | Default Value |
|-------|----------------|
| Username | admin |
| Password | 12345 or blank (no password) |
In some older or specific firmware versions, the password might be:
admin123456888888666666
However, the most common working combination is Username: admin Password: 12345.
5. The DVR is in "Lockout Mode"
After 5–10 failed login attempts, many Multistar DVRs implement a 30-second to 5-minute cooldown period. Even the correct password will appear to fail during this time. Wait and try again.