Building a Hackintosh has come a long way from the days of complex boot flags and kernel panics. With the introduction of macOS Mojave (10.14), Apple shifted deeper into Metal API requirements and dropped support for many legacy graphics cards. However, for enthusiasts with compatible hardware, Mojave represents a sweet spot of stability, dark mode aesthetics, and 32-bit app compatibility.
Enter MultiBeast 11.3.0—the swiss-army knife for Hackintosh post-installation. Developed by tonymacx86, this tool is designed to convert a vanilla macOS installation into a fully bootable, hardware-accelerated Hackintosh. In this article, we will dissect everything you need to know about MultiBeast 11.3.0 for Mojave, including compatibility, driver selection, UEFI configuration, and troubleshooting.
The room was dark, illuminated only by the cold blue wash of a monitor. It was 2018, and the air was thick with anticipation—and the faint smell of overheated circuitry from a Gigabyte Z370 motherboard.
Elias stared at the screen. He had just finished the installation of macOS Mojave. It was a triumph of engineering will, a forbidden act of alchemy that turned standard PC parts into a pseudo-Mac. But he wasn't done. The installation was just the raw clay; he needed to sculpt it into something usable.
On the desktop sat a single, ominous icon: MultiBeast 11.3.0.
In the Hackintosh community, MultiBeast was the "Book of Spells." It was a utility that installed the specific drivers (kexts) and bootloader configurations required to make the hardware sing. Version 11.3.0 was the specific tome tuned for Mojave.
Elias cracked his knuckles. He knew the stakes. One wrong checkbox, one incorrect audio ID, and the system would vanish upon reboot, replaced by the dreaded "prohibited" sign or an endless loop of white text on a black screen.
He double-clicked the icon. The interface opened, a grid of abstract icons and tabs. He navigated to the Drivers section.
"Okay," he whispered to the silence. "Audio. Everyone messes up the audio."
He selected Audio > Realtek ALC1220. He chose the layout ID 1. It was a guess, a coin flip between 1, 2, 3, or 7. If he was wrong, he’d have no sound. If he was very wrong, the kernel would panic and the machine would die.
Next, the networking. Network > IntelMausi. A safe bet. Essential for getting online to fix the inevitable mistakes.
Then, the most critical part: the bootloader. This was 2018; the transition was happening. The old guard used Clover, but the new prophets were preaching OpenCore. Elias, a creature of habit, stuck with Clover v2.4k. It was the anchor of MultiBeast 11.3.0.
He moved to the Settings tab.
"Build," he muttered, hovering the mouse over the button. "Save the kingdom."
He clicked Build. The drive whirred. Text scrolled in a terminal window. Files were copied. Permissions were repaired.
Then, the moment of truth.
He closed MultiBeast. He took a deep breath, opened the Apple Menu, and hit Restart.
The screen went black. Then, the familiar flash of the Clover boot screen appeared. He selected the boot drive. The Apple logo appeared. The progress bar began its slow, agonizing crawl.
Five percent... Twenty percent...
Elias sweated. In the MultiBeast 11.3.0 era, the "stuck at 2 minutes" error was the silent killer. It meant you forgot a USB port limit patch or messed up the SMBIOS.
But the bar kept moving.
It cleared the halfway mark. The screen flickered—the graphics driver was kicking in. The resolution shifted.
Then, the screen flashed white, and the desktop reappeared. Sound. He clicked the volume icon. It was full. He clicked Safari. It loaded.
Elias leaned back in his chair, exhaling a breath he felt he’d been holding for three hours. He opened "About This Mac." It read: iMac Pro (Late 2017).
He had fooled the machine. With MultiBeast 11.3.0 as his brush and Mojave as his canvas, he had painted a masterpiece of deception.
"For now," he whispered, knowing that the next OS update would likely break everything all over again. But for tonight, the Hackintosh purred.
Multibeast 1130 on Mojave: A Comprehensive Review
If you're a Hackintosh enthusiast, you're likely familiar with Multibeast, a popular tool used to create bootable USB drives and install macOS on non-Apple hardware. In this post, we'll take a closer look at Multibeast 1130 and its compatibility with macOS Mojave.
What is Multibeast 1130?
Multibeast is a software tool developed by tonymacx86, designed to simplify the process of creating a Hackintosh. It allows users to create a bootable USB drive from a macOS installer, making it easier to install macOS on non-Apple hardware. Multibeast 1130 is a specific version of the software, compatible with macOS Mojave.
Key Features of Multibeast 1130
Multibeast 1130 offers several key features that make it a popular choice among Hackintosh enthusiasts:
Using Multibeast 1130 on Mojave
To use Multibeast 1130 on Mojave, you'll need to follow these general steps:
Challenges and Considerations
While Multibeast 1130 can simplify the Hackintosh installation process, there are several challenges and considerations to keep in mind:
Conclusion
Multibeast 1130 on Mojave offers a convenient and user-friendly way to create a Hackintosh. While there are challenges and considerations to keep in mind, this software tool can simplify the installation process for those willing to take on the task. If you're considering creating a Hackintosh, Multibeast 1130 is definitely worth exploring.
Additional Resources
Disclaimer
Please note that creating a Hackintosh may violate Apple's End User License Agreement (EULA) for macOS. Additionally, installing macOS on non-Apple hardware can be challenging and may result in a non-functional system. Proceed with caution and at your own risk.
MultiBeast 11.3.0 is a post-installation tool specifically designed for macOS Mojave
to help users configure their Hackintosh builds after the initial operating system installation Key Functions Bootloader Installation
: It installs the necessary bootloader (typically Clover) to your hard drive so you can boot into macOS without a USB drive. Driver Setup (Kexts)
: It provides a graphical interface to select and install drivers (kexts) for essential components like audio (e.g., Realtek ALC), ethernet/networking, and graphics. System Configuration : It includes "Quick Start" options like for DSDT-free systems or
for those with custom configurations to streamline the setup process. Standard Usage Guide Fresh Install : Complete your macOS Mojave installation using a tool like Run MultiBeast : Open the MultiBeast 11.3.0 application on your new Mojave installation. Select Options
: Use the "Quick Start" tab for a baseline configuration, then manually select drivers for your specific hardware under the "Drivers" tab. Build and Install
: Review your choices in the "Build" tab and click "Install" to apply the changes to your system drive.
: Once complete, reboot your computer and select your internal drive as the primary boot device in the BIOS. Important Considerations No Uninstaller
: MultiBeast does not have a built-in uninstaller; any kexts installed must be removed manually from /Library/Extensions if they cause issues. One-Size-Fits-All Risk : Some users on forums like
MultiBeast 11.3.0 is a specialized post-installation tool released in May 2019 by tonymacx86.com specifically for macOS Mojave. It is designed to make a Hackintosh system fully functional by installing necessary bootloaders, drivers, and configuration files. Core Functionality
MultiBeast acts as a collection of "kexts" (kernel extensions) and drivers wrapped in a graphical user interface (GUI). Its primary purpose is to:
Enable Hard Drive Booting: Installs the Clover bootloader to the system drive so the PC can boot without the initial USB installer.
Hardware Support: Provides drivers for audio, network (Ethernet), and graphics that are not natively supported by macOS on non-Apple hardware.
System Definitions: Allows users to set a specific Mac profile (e.g., iMac 14,2) to ensure better compatibility and power management. Version 11.3.0 Specifics
This version was an update specifically for the Mojave lifecycle. Key elements of using it include:
Quick Start Options: Features "UEFI Boot Mode" for modern systems (Intel 7/8/9/100/200/300 Series) and "Legacy Boot Mode" for older BIOS-based motherboards.
Driver Customization: Includes a wide range of audio and network options that users must select based on their motherboard’s specific chipsets.
Configuration Backup: Users can save or print their selected configuration for future reinstalls. Usage Overview
Post-Installation: You run MultiBeast after you have successfully installed macOS Mojave using a tool like UniBeast.
Selection: Navigate through the Audio, Disk, Misc, Network, and USB tabs to select the components your specific hardware requires.
Build and Install: The "Build" tab summarizes all selections before you click "Install" to write them to the system’s EFI partition.
Here’s a feature overview for MultiBeast 11.3.0 (often shortened to “1130”) running on macOS Mojave (10.14.x). This version was specifically updated for Mojave’s requirements, including support for APFS, dark mode, and Mojave’s security changes.
| Category | Options | |----------|---------| | Audio | Realtek ALC8xx (with AppleALC), HDMI/DP audio, USB audio | | Disk | 3rd-party SATA (e.g., JMicron, ASMedia), Intel AHCI | | Graphics | NVIDIA Web Driver helper, Intel graphics fixes (HD 4600, HD 530, etc.) | | Misc | FakeSMC (with sensors), NullCPUPowerManagement, RTC patch | | Network | IntelMausiEthernet, RealtekRTL8111, AtherosE2200, Broadcom BCM94360 | | USB | USBInjectAll + port limit patch (for Mojave’s 15-port limit) |
1, 2, 3, 7, 11, or 99).
MultiBeast 11.3.0 was released during the transition to stricter USB requirements in macOS Mojave/Catalina.
This guide assumes you have already created a bootable USB installer for macOS Mojave and have successfully installed the OS to your hard drive. MultiBeast is a post-installation tool used to configure your bootloader and drivers (kexts) so the computer can boot on its own without the USB drive.
In the ever-evolving world of Hackintosh building, few names carry as much weight as TonyMacX86’s MultiBeast. While the utility has faded into relative obscurity in the era of OpenCore and vanilla installations, there was a golden era when a single click could turn a stock macOS installer into a fully functional custom rig.
MultiBeast 11.3.0, released in early 2019 for macOS Mojave (10.14.6), represents the peak of that era. It was the final version before the seismic shift to the T2 chip’s influence and the deprecation of system kexts in favor of more complex bootloaders. Let’s dissect why this specific version became a legend—and a cautionary tale.
Before running MultiBeast, ensure your BIOS is configured correctly. Settings vary by motherboard, but the general rules for Mojave are:
