MTP-II Bluetooth Printer Driver for Windows 10: Complete Installation Guide
Setting up an MTP-II bluetooth printer driver on Windows 10 is essential for businesses that rely on portable thermal printing for receipts, labels, or invoices. While these 2-inch mobile printers are highly efficient, getting them to communicate with a Windows PC over Bluetooth requires specific steps—pairing the device, identifying the correct COM port, and installing the appropriate driver. How to Install the MTP-II Printer Driver on Windows 10
Follow these steps to successfully set up your portable printer: 1. Enable Bluetooth and Pair the Device
Power On: Ensure the MTP-II printer is turned on. You should see a green power light and a blue Bluetooth light.
Enter Pairing Mode: On your Windows 10 PC, go to Settings > Bluetooth & Devices and click Add Device.
Locate Printer: Select your printer from the list (it may appear as "MTP-II", "MTP58B", or a serial number like "PRT-XX-XX").
Enter Passcode: If prompted for a pairing code, the default is usually 1234 or 0000. 2. Identify the Outgoing COM Port
Bluetooth printers communicate through virtual COM ports. You must identify which port Windows has assigned to your MTP-II:
In the Bluetooth settings window, click More Bluetooth options. Navigate to the COM Ports tab.
Look for the Outgoing COM port number assigned to your printer (e.g., COM3 or COM4) and write it down. 3. Install the Driver Software
Download: Obtain the driver from the manufacturer's official site or a trusted repository like the HPRT MPT-II Driver page or DriverDouble.
Run Setup: Open the installer (often named HPRTMPTPrinterDriver-v-1.0.1.2.exe).
Configure Port: During installation, you will be asked to select a port. Choose the COM port you identified in the previous step.
Select Printer Series: For a 2-inch (58mm) MTP-II printer, select the POS 58 or MPT-II series. Troubleshooting Common Setup Issues
If your printer is paired but won't print, try these common fixes:
Check Bluetooth Services: Ensure "Bluetooth Support Service" is set to Automatic and is currently Started in services.msc.
Self-Test Page: To verify the hardware is working, turn the printer off, then hold the Paper Feed and Power buttons simultaneously for 3 seconds to print a test page.
Driver Reinstallation: If the device shows an error in Device Manager, right-click the entry, select Update Driver, and manually choose Portable Devices > USB MTP or browse for the downloaded .inf file.
Error Code 10: If you encounter Error Code 10, some users recommend re-registering btmshellex.dll via the Command Prompt as an administrator.
The MTPII Bluetooth printer driver on Windows 10 isn’t broken—it’s just archaeological. Using one successfully teaches you more about how Windows handles Bluetooth, virtual COM ports, and driver signing than any textbook could. Next time you see “MTPII” in Device Manager, don’t be frustrated. Be fascinated: you’re looking at a ghost from the XP era, still printing receipts for a modern world.
Pro Tip: If you actually need to get one working today, download Zadig to install the WinUSB driver for the Bluetooth device, then use RawPrint or POS for .NET to send ESC/POS commands. Or just buy a printer that supports “Windows 10 Bluetooth printing” out of the box—but where’s the fun in that?
What is MTPII Bluetooth Printer Driver?
MTPII (Media Transfer Protocol II) is a protocol used for transferring media files between devices. In the context of Bluetooth printers, the MTPII driver allows Windows 10 to communicate with the printer and send print jobs.
Why do I need the MTPII Bluetooth Printer Driver?
If you've purchased a Bluetooth printer that uses the MTPII protocol, you'll need to install the driver on your Windows 10 machine to enable printing. The driver helps your computer recognize the printer and facilitates communication between the two devices.
Step-by-Step Installation Guide
C:\MTPII_Driver).C:\MTPII_Driver).Troubleshooting Common Issues
Tips and Variations
By following this guide, you should be able to successfully install and troubleshoot the MTPII Bluetooth printer driver on your Windows 10 machine. Happy printing!
The MTP-II Bluetooth printer is a popular 58mm mobile thermal printer used widely for portable receipt printing in retail, logistics, and hospitality. Setting up the
on Windows 10 involves a specific two-step process: pairing the hardware via Bluetooth and then manually mapping the driver to the correct virtual COM port. 1. Download the Driver
To start, you need the appropriate software package, typically labeled for POS-58 or MPT-II series. Manufacturer Source:
printers come with a mini-CD or a QR code in the box that links to a ZIP file containing the Windows driver. mtpii bluetooth printer driver windows 10
Alternative Downloads: If you lack the physical media, you can find generic versions through sites like Driverscape or DriverIdentifier.
Installation Tip: Run the installer as an administrator. During setup, select the POS-58 series and choose Windows 10 as your operating system. 2. Pair the Printer via Bluetooth
Before the driver can send data, your PC must recognize the printer as a Bluetooth device.
Power On: Turn on the printer and ensure no other devices are currently paired with it.
Add Device: Go to Settings > Devices > Bluetooth & other devices and select Add Bluetooth or other device.
Search & Pair: Select your printer (often named "MPT-II" or "PRT-XX-XX") and enter the default pairing code, which is usually 0000 or 1234.
Confirm Connection: Once paired, the status should change to "Connected" or "Paired". MTP Bluetooth Device Drivers Download
MTPII Bluetooth Printer Driver Windows 10: A Comprehensive Guide
In today's world of wireless technology, Bluetooth printers have become a staple in many homes and offices. These devices offer convenience, flexibility, and ease of use, making them a popular choice for printing documents and photos. However, to get the most out of your Bluetooth printer, you need to install the right drivers on your computer. In this article, we'll focus on the MTPII Bluetooth printer driver for Windows 10, providing you with a detailed guide on how to install, update, and troubleshoot this essential software.
What is MTPII Bluetooth Printer Driver?
MTPII (Media Transfer Protocol II) is a protocol used for transferring media files, such as photos and documents, between devices. The MTPII Bluetooth printer driver is a software component that enables your Windows 10 computer to communicate with your Bluetooth printer using this protocol. This driver allows you to print documents, photos, and other media files wirelessly, making it a vital piece of software for Bluetooth printer users.
Why Do I Need to Install the MTPII Bluetooth Printer Driver?
If you've recently purchased a Bluetooth printer or upgraded to Windows 10, you may need to install the MTPII Bluetooth printer driver to get your printer up and running. Here are a few reasons why:
How to Install the MTPII Bluetooth Printer Driver on Windows 10
Installing the MTPII Bluetooth printer driver on Windows 10 is a relatively straightforward process. Here are the steps to follow:
Alternative Installation Method
If the above method doesn't work, you can try downloading the MTPII Bluetooth printer driver from the manufacturer's website. Here's how:
Troubleshooting Common Issues
If you're experiencing issues with your MTPII Bluetooth printer driver, here are some common problems and their solutions:
Updating the MTPII Bluetooth Printer Driver
To ensure that your printer continues to work smoothly, it's essential to keep your MTPII Bluetooth printer driver up to date. Here are the steps to follow:
Conclusion
In conclusion, the MTPII Bluetooth printer driver is a crucial software component that enables your Windows 10 computer to communicate with your Bluetooth printer. By following the installation and troubleshooting steps outlined in this article, you should be able to get your printer up and running smoothly. Remember to keep your driver updated to ensure that your printer continues to work efficiently. If you're experiencing any issues, don't hesitate to contact the manufacturer's support team for assistance.
Setting up the MTP-II (also known as MPRINT MPT-II) on Windows 10 involves a specific sequence: pairing the device via Bluetooth, identifying its virtual COM port, and manually installing the driver to that port. Step 1: Pair the Printer via Bluetooth
Before Windows can "see" the printer, it must be paired as a Bluetooth device.
Turn on the printer: Ensure it is not connected to other devices.
Make it discoverable: Most MTP-II printers are discoverable as soon as they are powered on.
Search on Windows: Go to Settings > Devices > Bluetooth & other devices and click Add Bluetooth or other device.
Pairing Details: Select the device named "MPT-II" (or similar). If prompted for a PIN, use the default 0000 or 1234. Step 2: Identify the Outgoing COM Port
Bluetooth printers communicate through virtual COM ports. You must find the specific port assigned to your MTP-II to complete the driver setup.
In the same Bluetooth & other devices window, scroll down and click More Bluetooth options. Click the COM Ports tab.
Look for the Outgoing port associated with "MPT-II" (e.g., COM3 or COM4). Note this number down. Step 3: Download and Install the Driver MTP-II Bluetooth Printer Driver for Windows 10: Complete
Since MTP-II is a generic name used by various manufacturers like HPRT, Kankeirr, and GOOJPRT, drivers are often provided by the specific brand or generic driver repositories.
Now you need a driver that sends data to that COM port.
Many MTPII printers support ESC/POS commands. Install a generic ESC/POS Bluetooth driver:
Microsoft ESC/POS Thermal Printer Driver (or from third-party like OPOS).| Printer Brand | Driver Type | Download Link (official) | |---------------|-------------|----------------------------| | MUNBYN | Windows Bluetooth driver | munbyn.com/pages/drivers | | Bixolon | Universal Windows driver | bixolon.com/download | | Xprinter | ESC/POS driver for Win 10 | xprintertech.com/driver | | Zjiang (Generic) | Generic 58mm Bluetooth driver | zjiang.en.alibaba.com |
If you have a truly unbranded MTPII, try the “POS Thermal Printer Driver for Windows” from Zjiang or the “Seiko Instruments MP-B20” driver—many MTPII clones emulate it.
For most modern Windows 10 installations, the MTPII board uses a generic serial protocol. You often do not need to download a specific "driver file" from a website.
0000 or 1234.If you can’t find the exact MTPII driver:
This setup works reliably for most MTPII and similar Bluetooth thermal printers on Windows 10.
It was a typical Monday morning for John, a freelance graphic designer. He had a big project deadline looming and needed to print out some important documents for a meeting with a potential client. However, when he tried to print, he realized that his trusty old printer, an MTPII Bluetooth printer, wasn't working.
John had bought the MTPII printer a few years ago, and it had always worked seamlessly with his Windows 7 laptop. But now, after upgrading to Windows 10, he was having trouble getting it to work.
He checked the printer's control panel and saw that it was properly connected to his laptop via Bluetooth. But when he tried to print a test page, nothing happened. He received an error message saying that the printer driver was not installed.
John searched online for a solution and found that many users were having similar issues with the MTPII Bluetooth printer driver on Windows 10. He tried downloading the driver from the manufacturer's website, but it wasn't compatible with Windows 10.
Feeling frustrated, John decided to reach out to the manufacturer's customer support. After waiting on hold for 20 minutes, he finally got to talk to a representative.
"Hi, I'm having trouble getting my MTPII Bluetooth printer to work with Windows 10," John explained. "I've tried downloading the driver from your website, but it doesn't seem to be working."
The representative apologized for the inconvenience and asked John to try a different driver. "We have an updated driver that should work with Windows 10," she said. "But I need you to try a few things first."
John followed the representative's instructions, which involved uninstalling the existing driver, restarting his laptop, and then installing the new driver. After a few minutes of fiddling with the settings, John was able to get the printer to work.
The representative walked him through the process of configuring the printer settings and testing the connection. Finally, John was able to print out a test page successfully.
"Thank you so much for your help!" John exclaimed. "I really appreciate it."
The representative smiled and said, "No problem, John. We're glad we could get you up and running. If you have any more issues, don't hesitate to reach out to us."
With his printer working again, John was able to finish preparing for his meeting and left for the client's office feeling confident. From then on, he made sure to regularly check for updates on the manufacturer's website to ensure that his printer continued to work smoothly with his Windows 10 laptop.
The (often referred to as MTPII) is a 58mm portable Bluetooth thermal receipt printer compatible with Windows 10. Setting it up involves pairing the device via Bluetooth and then configuring a "Communication Driver" to link Windows to the printer's virtual COM port. Driver Installation & Setup Guide To get your printer running on Windows 10, follow these steps: Pair the Device: Turn on the printer and ensure Bluetooth is active.
Open Settings > Devices > Bluetooth & other devices on your PC and select Add Bluetooth or other device . Select your printer (usually named "
" or "MTP58B") and enter the pairing code, typically 0000 or 1234. Identify the COM Port:
In Bluetooth settings, click More Bluetooth options and go to the COM Ports tab.
Note the Outgoing COM port number assigned to the printer (e.g., COM3). Install the Driver : Download the
Windows Driver from official manufacturer sources like PRT Tech or Mate Technologies.
Run the installer and select POS 58 Series as the printer type. Configure the Port:
Go to Control Panel > Devices and Printers, right-click your new printer, and select Printer Properties.
In the Ports tab, check the box next to the COM port you identified in Step 2 and click Apply. Key Features
Portability: Compact design weighing approximately 180g-440g, making it ideal for mobile point-of-sale (POS) needs.
Battery Life: Often equipped with a 2000mAh to 2600mAh rechargeable lithium-ion battery for long standby times.
Compatibility: Supports Windows (XP through Windows 11), Android, and iOS. The Verdict The MTPII Bluetooth printer driver on
Printing: Direct thermal printing at 58mm width with speeds up to 90mm/s. Troubleshooting Tips
Self-Test Page: If you are unsure of the Bluetooth name or password, turn off the printer, hold the FEED button, and turn it back on. It will print a configuration page with these details.
Connection Errors: If the printer is paired but won't print, double-check that the assigned COM port in Printer Properties matches the Outgoing port in your Bluetooth settings. Go to product viewer dialog for this item.
Milestone Mpt-ii 58mm 2inch Thermal Bluetooth Receipt Bill Printer With 10pcs Thermal Roll Thermal Receipt Printer
Here’s a complete, ready-to-use post for a forum, blog, or support page:
Title: How to Install MTPII Bluetooth Printer Driver on Windows 10
Post:
If you own an MTPII Bluetooth printer (common for portable receipt, label, or mobile printing), here’s how to get it working on Windows 10.
Step 1: Download the Driver
.exe or .zip file. If unavailable, try a generic “Mobile Bluetooth Printer” driver.Step 2: Install the Driver
Step 3: Pair the Printer via Bluetooth
0000 or 1234).Step 4: Set as Default Printer
Step 5: Test the Printer
Troubleshooting Tips:
services.msc > restart “Print Spooler”).Note: Some MTPII printers only support ESC/POS commands – they won’t print standard Windows documents unless you use POS software (like Loyverse, SmartVend, or QZ Tray).
Let me know if you need help finding the exact driver for your MTPII model!
Installing the MTP-II (or MPT-II) Bluetooth printer on Windows 10 involves two primary phases: pairing the device via Bluetooth and then mapping that connection to a specific COM port using a communication driver. Phase 1: Bluetooth Pairing
Power On: Ensure the printer is on and in pairing mode. You can print a self-test page (usually by holding the FEED button while turning it on) to confirm the Bluetooth name (often " Go to product viewer dialog for this item. Go to product viewer dialog for this item. ") and the pairing PIN.
Windows Settings: Navigate to Settings > Devices > Bluetooth & other devices.
Add Device: Click Add Bluetooth or other device and select Bluetooth. Select Printer : Choose your printer (e.g., " ") when it appears.
Enter PIN: Use the default pairing code, typically 0000 or 1234. Phase 2: Driver Installation & Port Configuration
Even when paired, these thermal printers require a specific communication driver to handle the virtual serial interface.
The (often marketed under brands like Milestone or GOOJPRT) is a popular 58mm portable thermal receipt printer. Setting it up on Windows 10 via Bluetooth is a multi-step process because Windows does not automatically treat it as a standard printer upon pairing; it first treats it as a serial device. 1. Bluetooth Pairing
Before installing drivers, you must pair the device with your PC. Power On: Ensure the printer is charged and turned on.
Search: In Windows 10, go to Settings > Devices > Bluetooth & other devices and select Add Bluetooth or other device. Identification: The printer typically appears as " ".
PIN Code: When prompted for a pairing code, use either 0000 or 1234. 2. Identifying the Virtual COM Port
This is the most critical step for Bluetooth functionality on Windows. Go to Control Panel > Hardware and Sound > Devices and Printers. Find the paired icon (it may appear under "Unspecified").
Right-click it and select Properties, then go to the Services tab.
Ensure Serial Port (SPP) is checked. Note the assigned COM Port (e.g., COM3 or COM5). 3. Driver Installation
You will need the POS 58 Series driver, often found on the manufacturer's site or included mini-CD.
Download: Search for "POS58 Printer Driver" from reputable sources like Driver Scape or the manufacturer.
Setup: Run the installer and select Windows 10 and 58 Series as the printer type.
Port Selection: During or after installation, you must manually set the printer port to the COM Port you identified in Step 2. 4. Verification & Troubleshooting MPT-II User Manual