Date: October 26, 2023 Subject: Acquisition and Installation of Drivers for the ARP-990 KC Mini Thermal Printer Status: Informational
Because the ARP-990 KC is often marketed under various brand names or as a generic "OEM" product, finding a single official website can be difficult. The printer is typically based on the standard ESC/POS command set.
If you cannot find a driver specifically labeled "ARP-990," you can usually use drivers for compatible chipsets. Here are the best methods to source the driver:
Once you have the driver file, follow this precise installation order. Do not connect the printer before installing the driver unless instructed.
After installing ESC/POS driver:
net start spooler
echo Hello > LPT1: (if parallel)
copy test.txt COM3: (if serial, adjust port)
For ESC/POS raw printing (more reliable): Use “Generic / Text Only” driver → Printer Properties → Advanced → Print Processor = “Raw”.
Below is a reliable, generic method to obtain a functional driver for the ARP-990 KC. Since manufacturer URLs change, we’ll focus on the methodology and a widely compatible solution: the EPSON TM-T88V driver (often cross-compatible with ESC/POS printers like the ARP-990 KC).
If no driver exists, use:
apt install printer-driver-escposThe Mini Receipt Printer ARP-990KC is a high-performance 80mm thermal printer widely used in retail and hospitality for its 250mm/s print speed and multi-interface support. To ensure it works correctly with your Windows PC, you must install the appropriate ESC/POS emulation drivers. Where to Download the Driver
While there is no single "official" global website for ARP printers, this model uses standard ESC/POS emulation. You can find compatible drivers from these sources:
Raja Electronic (Product Page): This specific model is listed on Raja Electronic, where you can often find driver links or contact support for the latest files.
Generic ESC/POS Drivers: Since the printer follows the ESC/POS standard, you can use the Custom P3 / PX-90 Printer Driver or other universal thermal receipt printer drivers.
Wasp Helpdesk: Many 80mm thermal printers are compatible with the Thermal Receipt Printer Driver v4.51. Installation Guide for Windows Follow these steps to set up your printer via USB:
Hardware Connection: Connect the power adapter and plug the USB cable into your computer. Leave the printer turned off initially.
Run the Installer: Right-click the downloaded driver (e.g., setup.exe) and select Run as administrator. Mini Receipt Printer Arp-990 Kc Driver Download
Configure OS Info: Select your Windows version (Windows 10 or 11) in the dialog box.
Select Interface: When prompted for the port, select USB. If the installer asks for a specific port number (like USB001), you can usually leave it as the default or let it auto-detect.
Power On: Turn on the printer when prompted. Windows should recognize the device as "POS Printer" or "Thermal Receipt Printer". Print a Test Page: Go to Control Panel > Devices and Printers. Right-click your new printer and select Printer Properties.
Click Print Test Page to confirm the connection is successful. Technical Specifications Print Method Direct Thermal Line Printing Print Speed Resolution 203 DPI (8 dots/mm) Interfaces Serial, USB, and Ethernet (RJ45) Auto Cutter Partial or Full Cut (1 million cuts life) Emulation Troubleshooting Common Issues Mini Receipt Printer ARP-990KC
Finding official drivers for the ARP-990KC Mini Receipt Printer
can be difficult as the manufacturer often does not host a centralized global download portal. However, this printer is built on standard ESC/POS emulation
, which means it is often compatible with generic thermal printer drivers. www.rajaelectronic.com Driver Download Options Manufacturer/Vendor Site: Raja Electronic product page provides technical specifications for the but may require direct contact for the specific driver file Third-Party Community Links: Community-shared files are available on platforms like Google Drive Google Drive (Mirror) Technical Report: Mini Receipt Printer ARP-990 KC Driver
Always scan third-party downloads for malware before installation. Generic POS Drivers: Since the printer uses
, you can often use a generic "POS-80" or "POS-58" driver (depending on paper width) if the specific driver is unavailable www.rajaelectronic.com Installation Steps (Windows 10/11) Connect the Hardware:
Plug the USB cable into your printer and computer, then turn the printer on. Open Devices and Printers: Navigate to Start > Settings > Devices > Printers & scanners Add a printer or scanner Manual Selection: If the printer isn't found automatically, click "The printer that I want isn't listed" Install Driver:
"Add a local printer or network printer with manual settings." Choose the USB port (e.g., USB001) and then click "Have Disk" to point to the driver files you downloaded. Test Print:
After installation, right-click the printer in your Control Panel and select Printer Properties > Print Test Page to confirm it is working. Lightspeed Technical Specifications Printing Method Direct thermal line printing Serial, USB, Ethernet Resolution specific version of the driver for an older operating system like Mini Receipt Printer ARP-990KC
A driver is software that allows your operating system (Windows, Linux, or Mac) to communicate with the printer’s hardware. Without the correct Mini Receipt Printer ARP-990 KC driver, your computer will either not recognize the printer at all, or it will print garbled text (raw data) instead of a readable receipt. Common symptoms of a missing or incorrect driver include: