Leica Tcr805 Total Station User Manual ✮

Leica TCR 805 Total Station User Manual

Introduction

The Leica TCR 805 is a high-performance total station designed for a wide range of surveying applications. This user manual provides a comprehensive guide on how to operate, set up, and maintain your Leica TCR 805 total station.

Instrument Overview

The Leica TCR 805 is a motorized total station with a 5" angle accuracy and a 2" distance accuracy. It features a large 5-inch touchscreen display, integrated Bluetooth, and Wi-Fi connectivity. The instrument is powered by a rechargeable battery and comes with a comprehensive set of accessories.

Setting Up the Instrument

  1. Unpacking and Inspection: Carefully unpack the instrument and inspect it for any damage or defects.
  2. Battery Installation: Insert the rechargeable battery into the instrument and charge it according to the manufacturer's instructions.
  3. Instrument Setup: Place the instrument on a stable surface and ensure it is level. Attach the tribrach and any additional accessories as required.

Operating the Instrument

  1. Turning On/Off: Press and hold the power button to turn the instrument on or off.
  2. Navigation: Use the touchscreen display or the navigation keys to access the instrument's menus and functions.
  3. Measuring: Select the measurement mode (e.g., distance, angle, or coordinate measurement) and follow the on-screen instructions.
  4. Data Management: Store and manage measurement data using the instrument's internal memory or external storage devices.

Measurement Procedures

  1. Distance Measurement: Measure distances using the instrument's infrared EDM (Electronic Distance Measurement) technology.
  2. Angle Measurement: Measure horizontal and vertical angles using the instrument's high-precision encoder.
  3. Coordinate Measurement: Measure coordinates using the instrument's built-in GPS and leveling functions.

Instrument Calibration

  1. Horizontal Circle Calibration: Perform a horizontal circle calibration to ensure accurate angle measurements.
  2. Vertical Circle Calibration: Perform a vertical circle calibration to ensure accurate vertical angle measurements.
  3. Trunnion Axis Calibration: Perform a trunnion axis calibration to ensure accurate measurements.

Error Messages and Troubleshooting

  1. Error Messages: Refer to the instrument's error messages and follow the on-screen instructions to resolve any issues.
  2. Troubleshooting: Consult the user manual or contact Leica support for assistance with troubleshooting and repair.

Maintenance and Care

  1. Cleaning: Regularly clean the instrument and its accessories to ensure optimal performance.
  2. Storage: Store the instrument in a dry, secure location to prevent damage or loss.
  3. Software Updates: Regularly check for software updates and install them according to the manufacturer's instructions.

Technical Specifications

Warranty and Support

The Leica TCR 805 total station is backed by a comprehensive warranty and support program. Contact Leica support for assistance with any questions or issues.

Conclusion

The Leica TCR 805 total station is a powerful and versatile instrument designed for a wide range of surveying applications. By following the guidelines and procedures outlined in this user manual, you can ensure optimal performance and accuracy from your instrument.

The Leica TCR805 is a precise 5" accuracy total station designed for construction and engineering surveys, featuring an alphanumeric keyboard and reflectorless measurement capabilities up to 400m. 1. Essential Instrument Setup

Correct leveling and centering are critical for achieving the device's rated accuracy.

Tripod & Tribrach: Secure the tripod over your point. Attach the instrument using the tribrach center bolt.

Centering: Use the laser plummet (standard on the TCR805) to align the instrument directly over the ground mark. Leveling: Adjust tripod legs to center the circular bubble.

Use the three footscrews to level the electronic plate level shown on the display. leica tcr805 total station user manual

Rotate the instrument 90° and fine-tune until the electronic level is centered with a checkmark. 2. Interface and Key Controls

The TCR805 uses a combination of fixed and variable keys for navigation.

Power Key: Located on the side cover to turn the unit on/off.

Function Keys (F1-F4): These "softkeys" change their purpose based on the menu shown at the bottom of the screen.

Alphanumeric Keyboard: Used for entering point IDs, codes, and coordinates.

Drive Knobs: Use the horizontal and vertical drives for fine pointing at your target. 3. Measuring and Distance Modes (EDM)

The "R" in TCR805 indicates reflectorless capability, allowing you to measure to surfaces without a prism. TCR805 UserManual 3.0 English | PDF | Ascii - Scribd

I found several copies of the Leica TCR805 / TPS800-series user manual online (PDFs on Scribd and other manual sites) and support notes (e.g., Carlson Knowledge Base for TC/TC805L). I can:

Which would you like?

The Leica TCR805 is a cornerstone of the Leica TPS800 series, widely regarded for its 5-second angular accuracy and reflectorless measurement capabilities. Whether you are a professional surveyor or a construction engineer, understanding the Leica TCR805 total station user manual is vital for achieving high-precision results in the field. 1. Key Technical Specifications Leica TCR 805 Total Station User Manual Introduction

The TCR805 is designed for versatility in engineering and tacheometry surveys.

Accuracy: 5-second angular accuracy and distance precision of ±3mm + 2ppm.

EDM (Electronic Distance Measurement): Supports both infrared (IR) for prisms and reflectorless (RL) modes.

Range: Up to 400m in reflectorless mode and 3,500m with a single prism.

Memory: Internal storage for approximately 10,000 to 18,000 data blocks.

Durability: IP55 rating for protection against dust and water. 2. Instrument Setup and Leveling

Proper setup is the first step toward accurate data collection. TCR805 UserManual 3.0 English | PDF | Ascii - Scribd

3. Used Equipment Dealers

Companies like Allen Precision, Bench Mark USA, or Southern Laser often refurbish old Leica units. If you contact their support teams, they may email you a PDF of the manual as a courtesy.

4. Data Management

If you are transferring data to a computer, the manual outlines the GSF (Leica GSI Format). It explains how to manage projects within the internal memory or PCMCIA cards (if your unit is equipped with one) and how to export points to DXF or CSV formats using Leica office software.

Key Sections in the Manual You Need to Know

If you are downloading the manual for quick troubleshooting, these are the chapters you will likely reference the most: Unpacking and Inspection : Carefully unpack the instrument

WeChat
Privacy Policy">