Ion Setup 3.2 May 2026

ION Setup 3.2 is a free, user-friendly configuration tool designed by Schneider Electric for managing PowerLogic power and energy meters. It provides a simplified interface for commissioning and configuring advanced metering devices without requiring extensive knowledge of the complex ION architecture. Core Purpose and Compatibility

ION Setup 3.2 serves as the primary gateway for technicians and engineers to interact with Schneider Electric’s high-end metering hardware. It is required for managing modern devices like the PowerLogic PM8000 series and the ION9000.

Firmware Updates: Newer firmware versions (e.g., PM8000 v2.2.1) explicitly require ION Setup 3.2 or later for successful installation and data integrity.

Legacy Support: It remains backward compatible with older meters such as the PM800 series, offering features like custom meter resets that were limited in earlier versions. Key Configuration Modes

The software operates in two distinct modes to accommodate different user expertise levels:

Basic Configuration (Setup Assistant): A wizard-based approach for common tasks.

Easily set up custom display screens on meters like the PM8000.

Configure basic communication parameters (Ethernet/Serial) and security settings.

Advanced ION Setup: A powerful modular environment for deeper customization.

Access: Users can enter this mode by CTRL-clicking the meter icon or changing the device properties.

Functionality: Allows for direct manipulation of ION modules, such as Display Modules for complex logic and data logging. Utility Features

Template Management: Users can modify Setup.cfg files to create default templates for multi-meter rollouts, ensuring consistency across a facility.

Diagnostic Tools: Includes features like Phasor Diagrams to verify wiring and real-time register viewing to troubleshoot advanced module logic.

RMP Support: While standard updates use the Rapid Meter Programming (RMP) protocol, the software allows users to disable RMP for slower, more stable framework uploads in unstable network environments. How to Obtain

The software is available as a free download from the official Schneider Electric Software Center. It is recommended to always use the latest release to ensure compatibility with the most recent security patches and hardware features. ion setup 3.2

ION Setup 3.2: The Ultimate Configuration Guide for Power Logic Meters

For electrical engineers and facility managers, the ION Setup 3.2 software is an indispensable tool. As a free, user-friendly configuration utility, it provides an intuitive interface for setting up and testing Schneider Electric (Power Logic) ION series meters. Whether you are managing a single device or a complex industrial network, version 3.2 remains a stable, go-to release for professionals.

In this guide, we’ll dive into what makes ION Setup 3.2 essential, its key features, and how to get the most out of your installation. What is ION Setup 3.2?

ION Setup is a proprietary software designed to simplify the configuration of ION-compatible power meters. Unlike full-scale Power Monitoring Expert (PME) systems, ION Setup is lightweight and focuses specifically on metering configuration rather than long-term data warehousing.

Version 3.2 is particularly valued for its compatibility with legacy systems while still supporting modern hardware like the PowerLogic PM8000 and ION7400 series. Key Features and Enhancements 1. Simple Configuration Mode

The "Setup Assistant" in version 3.2 allows users to perform basic tasks—like changing CT/PT ratios, communication settings, and clock synchronization—without needing to understand the complexities of ION architecture. 2. Advanced ION Programming

For power users, ION Setup 3.2 provides access to the "Advanced" mode. This allows you to view and edit individual ION modules, enabling custom logic, specialized alarming, and complex data logging configurations. 3. Firmware Support and Upgrades

Maintaining up-to-date firmware is critical for cybersecurity and performance. ION Setup 3.2 includes a robust firmware upload utility that guides you through the process of updating your meters safely. 4. Data Log Viewing

While it isn’t a permanent database, ION Setup can retrieve and display real-time data, event logs, and waveform captures. This is crucial for on-site troubleshooting and commissioning. How to Install ION Setup 3.2 To ensure a smooth installation, follow these steps:

System Requirements: Ensure you are running Windows 7 SP1 or later. While 3.2 is older, it typically runs well on Windows 10/11 in compatibility mode.

Download: Obtain the installer directly from the Schneider Electric official website or their "Exchange" community portal to ensure you have the latest build of the 3.2 branch.

Communication Prep: Have your connection method ready. ION Setup supports Ethernet (TCP/IP), Serial (RS-485), and Modem connections.

Network Setup: If connecting via Ethernet, ensure your PC is on the same subnet as your meters. Troubleshooting Common Connection Issues

Device Not Found: Check your baud rate and parity settings for serial connections. For Ethernet, ensure the IP address is pingable from your command prompt. ION Setup 3

Unit ID Mismatch: In serial daisy-chains, every meter must have a unique Unit ID (Slave ID). ION Setup will fail to connect if two devices share the same ID.

Firewall Blocks: Sometimes Windows Firewall blocks the port used by ION Setup (typically Port 502 for Modbus or 7700 for ION). Why Version 3.2 Still Matters

In the world of industrial automation, "newer" isn't always "better." Many facilities rely on ION Setup 3.2 because of its proven stability with older ION 7300 and 7500 series meters that are still in active service. It bridges the gap between legacy hardware and modern monitoring needs. Conclusion

ION Setup 3.2 is more than just a utility; it’s the "Swiss Army Knife" for anyone working with PowerLogic meters. By mastering its Setup Assistant and Advanced modules, you can significantly reduce the time spent on commissioning and improve the accuracy of your power quality data.

ION Setup 3.2 is a free configuration tool from Schneider Electric used to access, configure, and manage PowerLogic power and energy meters. It provides a user-friendly environment for remote meter configuration over Ethernet or serial communications. Key Features and Usage

Meter Configuration: Remotely set up meter features and use real-time data screens to verify settings.

Advanced Mode: Access detailed module lists (like "Display Modules" for PM8000) by holding the CTRL key while clicking on a meter to "Show Advanced ION Setup".

Device Diagnostics: Access hidden troubleshooting tabs by holding CTRL and left-clicking the Device Diagnostics icon.

PME Integration: Users can export device configurations from Power Monitoring Expert (PME) 2020 (or later) as CSV files and import them into ION Setup 3.2 to save time on manual entry. Technical Specifications

Compatibility: Supported on Windows 10 and later, as well as Windows Server 2012, 2016, 2019, and 2022.

Latest Version: As of early 2026, version 3.2.23249 is available.

Installation Note: The software is not UAC compliant; it should be installed by right-clicking the installer and selecting "Run as Administrator".

Configuration Directory: The default directory (typically C:\ProgramData\Schneider Electric\ION Setup\) can be changed via the Windows Registry at HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Schneider Electric\ION Setup\3.2 by editing the UserDir value. Solved: ION Setup 3.2 - Schneider Electric Community

If you're looking to set up or configure an Ionic project, here are some general steps and features you might find useful: Install for all SAPIs (Recommended): Configures both CLI

Step 4: Selecting Your Target

You have two options:

  1. Install for all SAPIs (Recommended): Configures both CLI and web server.
  2. Custom selection: Choose only CLI or only the web server SAPI.

Select the PHP version you want to protect (usually the one your application runs on).

Conclusion

If you have a more specific requirement or feature in mind for "ion setup 3.2," please provide additional details such as:

  • What platform (Android, iOS, web) are you targeting?
  • Are there specific plugins or features you need to integrate?
  • What have you tried so far?

This will help in providing a more tailored response.

Here’s a draft write-up for Ion Setup 3.2. You can use this as release notes, documentation, or an internal changelog.

3. System Requirements (Version 3.2 Era)

When ION Setup 3.2 was current, the typical operating environment included:

  • OS: Microsoft Windows XP, Windows 7, or Windows 8. (Compatibility with Windows 10 usually requires running in "Compatibility Mode").
  • Framework: Microsoft .NET Framework (typically v3.5 or v4.0 depending on the specific patch level of 3.2).
  • Hardware: Serial port (RS-232/RS-485) or Ethernet network interface card.

Step 2: Running the Tool (Platform Specific)

On Windows: Right-click the .exe file and select "Run as administrator". The GUI will launch instantly.

On Linux: Open a terminal and run:

chmod +x ioncube_setup_linux_3.2
sudo ./ioncube_setup_linux_3.2

Note: Sudo is required because modifying php.ini typically needs root privileges.

On macOS: Open the DMG and drag the application to your Applications folder. Control-click to open (to bypass Gatekeeper restrictions for unsigned binaries).

Chapter 4: Configuring Basic Meter Parameters (The 80% Use Case)

For 80% of users, Ion Setup 3.2 is used to change basic electrical parameters. Here is the workflow:

  1. Select the Device in the Site Tree.
  2. Click Setup → Basic Setup.
  3. Key Fields to Modify:
    • System Type: Choose 3-Phase 4-Wire Wye (most common), 3-Phase 3-Wire Delta, or 1-Phase.
    • PT Ratio (Potential Transformer): For MV systems (e.g., 14,400V primary to 120V secondary = Ratio 120).
    • CT Ratio (Current Transformer): (e.g., 200A primary / 5A secondary = Ratio 40).
    • Nominal Frequency: 50 Hz or 60 Hz.
  4. Write to Device: Click the Write button. Critical: Wait for verification (green checkmark) before disconnecting.

Common Mistake: Forgetting to set the Secondary Nominal Voltage (usually 100-120V for PT secondary). If left at 480V, your readings will be drastically wrong.

Error 1: "SourceGuardian Loader Conflict"

Symptom: After running Ion Setup, you get a "Failed to load ionCube" error. Cause: SourceGuardian loads first and hogs the Zend engine. Fix: Open php.ini and reorder the lines:

zend_extension = "ioncube_loader.so"
zend_extension = "sourceguardian.so"  <!-- Must come after -->