Intex 802.11n WLAN adapter is a legacy USB device commonly used to add wireless connectivity to older desktop or laptop computers. Because Intex is a rebrander, these adapters typically use third-party chipsets from manufacturers like HP Support Community Driver Identification & Download
To find the correct driver, you must identify the chipset inside your specific Intex dongle: Standard Driver Packages : Generic 802.11n driver bundles, such as WLan Driver 802.11n Rel. 4.80.28.7
, often resolve connectivity issues for these devices on Windows 7, 10, and 11. Manufacturer Specifics : Many Intex adapters (like the IT-WLB-150-N) use the Realtek RTL8188CU Ralink RT2870/3070 Third-Party Repositories : Sites like Driver Scape
host archived versions compatible with Windows XP through Windows 11. How to Install Without the CD
If you don't have the original driver disk, follow these manual steps to let Windows identify the device: 802.11n wlan wifi drivers needed on Windows 7 32-Bit
To get your Intex 802.11n WLAN adapter working, you typically need drivers compatible with the chipset inside the device, which is usually manufactured by MediaTek (Ralink) or Realtek. 1. Automatic Update (Recommended)
The easiest way to find the correct driver is to let Windows Search for it:
Plug in your Intex adapter and open Device Manager (right-click the Start button and select it). Expand the Network adapters section.
Right-click on the device (often listed as "802.11n WLAN" or "USB Wireless LAN Card") and select Update driver. Choose Search automatically for drivers. 2. Manual Driver Downloads
If Windows cannot find the driver, you can download it manually based on your specific Intex model (like the common IT-150N or IT-WL150):
The Intex 802.11n WLAN Adapter is a wireless network interface card (NIC) that allows computers to connect to wireless networks. To function properly, the adapter requires a driver, which is software that enables the operating system to communicate with the hardware.
Overview of the Intex 802.11n WLAN Adapter Driver
The Intex 802.11n WLAN Adapter driver is a software component that facilitates the interaction between the adapter and the operating system. The driver is responsible for:
Key Features of the Intex 802.11n WLAN Adapter Driver
Operating System Compatibility
The Intex 802.11n WLAN Adapter driver is compatible with various operating systems, including:
Installation and Configuration
To install the Intex 802.11n WLAN Adapter driver, follow these steps:
Troubleshooting Common Issues
Common issues with the Intex 802.11n WLAN Adapter driver include:
By installing and configuring the Intex 802.11n WLAN Adapter driver correctly, users can enjoy reliable and fast wireless connectivity on their computers.
To write a formal document or technical guide for the Intex 802.11n WLAN Adapter driver
, you should focus on its identification, installation steps, and troubleshooting. These adapters often use generic chipsets from manufacturers like Ralink (MediaTek) 1. Hardware Identification
Before downloading a driver, you must identify the specific chipset used by your Intex adapter to ensure compatibility. Device Manager
, right-click the unidentified "802.11n WLAN" device, select Properties , then go to the tab and select Hardware Ids Common IDs USB\VID_148F&PID_7601 (Often MediaTek/Ralink) USB\VID_0BDA&PID_8176 (Often Realtek) 2. Driver Installation Guide Automatic Update (Recommended) Connect your PC to the internet via Ethernet. Device Manager , right-click the 802.11n WLAN Update driver Search automatically for drivers
. Windows will attempt to find a signed driver from its online database. Manual Installation If you have downloaded the driver from a source like DriverScape (for compatible hardware): the file and extract it (if zipped). as an administrator. Follow the on-screen prompts and your computer once the process is complete. 3. Configuration & Optimization To ensure the adapter operates at its maximum "N" speed: Device Manager Network adapters Right-click your adapter > Properties 802.11n Mode (or similar) and ensure the value is set to If available, set Channel Width for 2.4GHz 20MHz/40MHz to increase throughput. 4. Troubleshooting Common Issues
Everything You Need to Know About the Intex 80211n WLAN Adapter Driver
In the world of networking, sometimes the smallest hardware makes the biggest difference. The Intex 80211n WLAN adapter is a popular, budget-friendly USB dongle that allows older desktops and laptops to connect to high-speed Wi-Fi. However, like any hardware, it is only as good as the software running it.
If you’re struggling with connection drops or your computer failing to recognize the device, you likely need to address the Intex 80211n WLAN adapter driver. Why Do You Need the Driver? intex 80211n wlan adapter driver
A driver acts as the translator between your Windows or Linux operating system and the Intex hardware. Without the correct driver: The PC might label the device as an "Unknown Device." You may experience limited connectivity or slow "N" speeds.
The adapter might frequently disconnect during high-bandwidth tasks like streaming. Technical Specifications
The Intex 80211n adapter typically utilizes the Ralink or Realtek chipset (often the RT2870 or RT5370 series). It supports the 802.11n standard, offering theoretical speeds up to 150Mbps or 300Mbps, depending on the specific model, and is backward compatible with 802.11b/g networks. How to Download and Install the Driver 1. Use the Included Resource CD
Most Intex adapters come with a mini-CD. If your PC has an optical drive, simply insert the disk and run Setup.exe. This is the most reliable way to get the manufacturer-approved version. 2. Windows Update (The Easiest Way)
Modern versions of Windows (10 and 11) have a massive library of generic drivers. Plug the adapter into a USB port. Open Device Manager (Right-click Start > Device Manager). Find the "Network Adapter" with a yellow exclamation mark.
Right-click it and select Update driver > Search automatically for drivers. 3. Manual Download from the Chipset Manufacturer
Since Intex often uses third-party chipsets, you can find the most up-to-date drivers directly from the source. Look for the "MediaTek/Ralink" or "Realtek" wireless LAN drivers on their official support sites. Troubleshooting Common Issues
"Device Not Recognized"Try plugging the adapter into a different USB port, preferably one directly on the motherboard (on the back of a desktop) rather than a front-panel port or a USB hub.
Slow Connection SpeedsThe 802.11n standard operates mostly on the 2.4GHz band. If your speeds are crawling, check for interference from microwave ovens or cordless phones, or try changing your router's channel to 1, 6, or 11.
Driver Signature ErrorsOn Windows 10 or 11, you might encounter an error stating the driver isn't "digitally signed." You may need to temporarily disable Driver Signature Enforcement in the advanced startup settings to install older Intex drivers. Conclusion
The Intex 80211n WLAN adapter remains a reliable tool for quick wireless fixes. Keeping your driver updated ensures you get the most stable connection and the fastest possible speeds provided by the "N" protocol.
The "Intex 802.11n WLAN adapter" is a generic branding for a series of USB wireless dongles (most notably the IT-150N or IT-LC-150N) that use third-party chipsets to enable Wi-Fi connectivity. Finding the correct driver is less about the "Intex" brand and more about identifying the specific chipset hidden inside the plastic casing. 1. Identifying Your Hardware
Most Intex 802.11n adapters use one of two primary chipsets. Identifying yours is the critical first step before downloading any software:
MediaTek (Ralink) MT7601U: The most common chipset for budget 150N adapters. Intex 802
Realtek RTL8188: Often found in "Nano" or high-gain versions.
Ralink RT2870/RT3070: Frequently used in older or high-power models. How to Check: Open Device Manager.
Expand Network Adapters and right-click your "802.11n WLAN" device.
Go to Details > Hardware IDs. Look for the VID (Vendor ID) and PID (Product ID): VID_148F = Ralink/MediaTek. VID_0BDA = Realtek. 2. Driver Acquisition Sources
Because Intex acts as a rebrander, official support pages can be difficult to find. You are often better off using the chipset manufacturer's drivers. 802.11 n/g/b Wireless LAN USB Adapter Drivers Download
The term “802.11n” is crucial. While outdated by today’s Wi-Fi 5 (802.11ac) or Wi-Fi 6 (802.11ax) standards, 802.11n is still perfectly functional for web browsing, email, YouTube (up to 1080p), and light online gaming.
On Linux, the Ralink RT3070 driver may require firmware (rt2870.bin) that isn’t installed by default. You can manually add it:
sudo apt install firmware-ralink
After that, the adapter works without any extra configuration — even though the box says “Windows only”.
The Intex 802.11n adapter is a marvel of budget engineering, often costing less than $5–$10. However, ask yourself these questions:
If you answered yes to any of the above, it’s time to upgrade to a USB 3.0 802.11ac or Wi-Fi 6 adapter. The drivers for those are equally easy to find, and the performance leap is massive.
But if you only need basic browsing, email, and legacy device support, the trusty Intex 802.11n WLAN adapter – with the correct driver installed – will serve you faithfully for years.
Crucial Warning: Intex does not always host drivers directly on their consumer website. Most Intex adapters use generic chipsets. Therefore, the safest way is often via chipset drivers or original CD media. Here is the step-by-step process:
Before we discuss drivers, let’s clarify the hardware. Intex Technologies (India) Ltd. is a well-known electronics brand, particularly in the South Asian market. Their 802.11n WLAN adapter is a USB dongle designed to add Wi-Fi capabilities to devices that lack them.