Hw-044 Datasheet «Extended – 2026»

The HW-044 is a MAX3232-based converter module designed to interface RS232 signals with TTL levels (3.3V-5V) for microcontroller communication. It is commonly applied in serial communication tasks, including firmware flashing and device upgrades. For technical specifications, see the documentation at Amazon.


Deep Dive into the HW-044: More Than Just a “Keyestudio” Sensor

If you have been tinkering with Arduino or Raspberry Pi for a while, you have likely accumulated a bag of miscellaneous blue breakout boards. One of the most common—yet often misunderstood—is the HW-044.

At first glance, it looks like a simple push-button or limit switch module. But if you just treat it as "button in/button out," you are missing half the story. Today, we are going to pull the actual HW-044 datasheet apart and look at the circuit, the logic, and why this module behaves differently than a raw mechanical switch. hw-044 datasheet

3. Pinout Description

The HW-044 has 20 pins clearly labeled on the PCB:

Left side (Low Voltage – LV)

Right side (High Voltage – HV)

⚠️ Note: LV1 corresponds to HV1, LV2 to HV2, and so on. Do not reverse the order. The HW-044 is a MAX3232-based converter module designed

8. Common Applications

Interfacing HW-044 with Arduino

Here is a standard wiring diagram and code example to get your HW-044 running with an Arduino Uno.

6. Typical Connections (to Arduino Uno)

| HW-044 | Arduino Uno | |--------|-------------| | VCC | 5V | | GND | GND | | DIN | D11 (MOSI) | | CS | D10 (SS) | | CLK | D13 (SCK) | Deep Dive into the HW-044: More Than Just