Humax - F1 Mini Software Update !exclusive!

To update your Humax F1 Mini software, you can use either an automatic over-the-air (OTA) update via satellite or a manual update using a USB stick. Method 1: Manual USB Update

This is the most reliable way to ensure you have the latest firmware. You will need a standard USB memory stick formatted to FAT32. Prepare the USB Drive:

Download the official software file from the Humax Middle East Support page. If the file is zipped, extract it first.

Rename the file exactly to f1free_upgrade.hdf (or f1miniplus_upgrade.hdf if you have the Mini+ or Mini Pro model).

Copy the file directly to the root of the USB stick (not inside any folders). Install the Update: Turn off your Humax receiver completely. Insert the USB stick into the USB port on the receiver.

Press and hold the power/standby button on the front panel while turning the receiver on. humax f1 mini software update

Keep holding the button until the screen shows that the download/update has started, then release it.

Once the progress reaches 100% and the update is complete, turn the receiver off and then back on to finish the process. Method 2: Automatic Satellite Update (OTA)

The Humax F1 Mini features an "Automatic Software Update Service" that detects new versions via your satellite connection.

How it works: The receiver periodically checks for updates through the satellite signal (OTA).

Triggering a scan: You can often find this in the main menu: Press Home or Menu on your remote. Go to Settings > System Settings > System Information. To update your Humax F1 Mini software, you

Select Check New Software or Software Update and follow the on-screen prompts. Important Tips

Do not disconnect power: Never turn off the receiver or unplug it while an update is in progress, as this can damage the device.

Factory Reset: If you experience glitches after an update, it is recommended to perform a Factory Default reset from the System Settings menu to clear out old data.

If you'd like to troubleshoot a specific error or need help finding the exact download link for your region:

Tell me your specific model (e.g., F1-Mini, F1-Mini+, or F1-Mini Pro). Connect the Humax F1 Mini to the internet and your TV

Provide your current software version found in the System Information menu. Share any error messages appearing during the update. Software Release - SUPPORT | HUMAX-Middle East

1) OTA / Network update (automatic/manual check)

  1. Connect the Humax F1 Mini to the internet and your TV.
  2. On the remote, press MENU (or Home) → Settings (or System) → Software Update (or Firmware Update).
  3. Select “Check for updates” (or similar).
  4. If an update is found, select Download and Install.
  5. Wait — the box will download, verify, install, and reboot. Do not power off.
  6. After reboot, verify new firmware version in Settings → About / System Information.

Notes:

  • If the device offers automatic updates, enable them to keep firmware current.
  • Updates may take 10–30 minutes depending on size and connection.

2. Preparation: Know Your Hardware

Before downloading any file, you must identify if your device is an Original Humax or a Clone.

  • Original Units: Can use official Humax firmware.
  • Clone Units: Using official firmware on a cloned box will likely "brick" the device (render it unusable). If you bought the box at a very low price from a non-authorized dealer, it may be a clone. Look for "Patch" or "Clone Safe" software if applicable.

Humax F1 Mini — Software Update Guide

Current Version: How to Check Your F1 Mini Firmware

Before searching for a new Humax F1 Mini software update, you must know what version you are currently running. Follow these steps:

  1. Turn on your Humax F1 Mini and navigate to the Home Screen.
  2. Scroll to the Settings icon (usually a gear symbol in the top-right corner).
  3. Inside Settings, look for Device Preferences or About.
  4. Select System Update or Firmware Version.
  5. Note the following details:
    • Android Security Patch Level (e.g., August 2024)
    • Build Number (e.g., HMF1_12_V1.2.5)
    • Kernel Version

Humax typically rolls out OTA (Over-The-Air) updates quarterly. As of the last major release, the stable version for the F1 Mini is Android 12 Go Edition with build HMF1_12_V2.1.0. If your build number is older than this, an update is available.

Q1: Will a software update delete my recorded shows?

A: No. Recordings stored on a USB drive are safe. However, a factory reset after the update will not delete the USB content—only internal settings.

Step-by-Step Guide: Performing a Humax F1 Mini Software Update

There are typically two methods to update the F1 Mini: Over-the-Air (OTA) and via USB. The OTA method is easier, but the USB method is more reliable if the OTA servers are down.

Follow Our Social Platforms