Huawei E5573 Drivers Windows 10 [patched] Link

The Huawei E5573 (including popular variants like the ) is a legacy 4G LTE mobile Wi-Fi hotspot that generally functions as a plug-and-play device on Windows 10. Driver & Setup Overview

On modern Windows 10 builds, you typically do not need to hunt for manual driver installers.

Plug-and-Play (HiLink): When connected via USB, the device usually emulates a CD drive containing the "MobileBroadband" setup. Running this installer automatically configures the necessary NDIS (Network Device Interface Specification) drivers.

Web Interface: Most users skip USB drivers entirely and manage the device via Wi-Fi by visiting 192.168.8.1 in a browser. This is the most stable way to use the device on Windows 10. Common Issues & Fixes

If the device is not recognized by Windows 10, it is usually due to the OS failing to switch the device from "Mass Storage Mode" to "Modem Mode." huawei e5573 drivers windows 10

Manual Driver Updates: If the device appears in Device Manager with a yellow exclamation mark (often under "Other Devices" as "Huawei Mobile"), you may need the Huawei HiSuite software. Installing HiSuite is the most reliable way to force-install the correct signed drivers for Windows 10.

COM Port Issues: For advanced users trying to "unbrick" or change firmware, Windows 10 often requires a specific "Huawei Port" driver to recognize the FC - PC UI Interface.

Power Management: A common "review" complaint is the device disconnecting. This is often fixed by going to Device Manager > Network Adapters > Huawei Mobile Connect, right-clicking Properties, and disabling "Allow the computer to turn off this device to save power." Verdict As of 2026, the

is an aging but capable device. While it was originally designed for Windows 7/8, its reliance on standard NDIS protocols makes it compatible with Windows 10 without needing third-party driver packs, provided you use the Huawei HiLink web interface or HiSuite for the initial handshake. The Huawei E5573 (including popular variants like the

When Do You Need to Manually Install Drivers?

Manual installation is rarely required, but may be necessary if:

• You see a yellow exclamation mark next to “Huawei Mobile Broadband” in Device Manager.
• The PC does not recognize the device at all.
• You want to use the USB tethering mode reliably.
• Windows fails to automatically install the “MBB (Mobile Broadband) Driver.”

Option B: Extract the Driver Manually (When Auto-Run Fails)

If Windows 10 does not show a virtual CD drive when you plug in the E5573, the device may be in "charge-only" or "modem" mode. You can extract drivers manually.

1. Download the official firmware update package for the E5573 (e.g., from a trusted source like huawei-firmware.com – proceed with caution, verify checksums).
2. Extract the update package using WinRAR or 7-Zip.
3. Look for a folder named Driver or USB_Driver.
4. Inside, you’ll find .inf files (e.g., ndis5.inf, hw_ndis.inf).
5. Open Device Manager (right-click Start button → Device Manager).
6. Find the "Unknown device" or the E5573 under "Other devices."
7. Right-click → Update driver → Browse my computer for drivers → Point to the folder with the .inf files.

Windows will now install the NDIS driver.

Issue 2: USB Tethering Works but Drops After a Few Minutes

Cause: Windows 10’s USB Selective Suspend power setting cuts power to the E5573. When Do You Need to Manually Install Drivers

Fix:

1. Go to Control Panel → Power Options.
2. Click Change plan settings next to your active plan.
3. Click Change advanced power settings.
4. Scroll to USB settings → USB selective suspend setting.
5. Set it to Disabled.
6. Click Apply → OK.

Part 6: Frequently Asked Questions (FAQs)

Problem 4: 64-bit vs. 32-bit Driver Errors

The Huawei E5573 drivers are mostly architecture-agnostic, but some older versions lacked 64-bit signatures. Windows 10 requires signed drivers.

Fix: Disable driver signature enforcement temporarily:

1. Shift + Restart PC → Troubleshoot → Advanced Options → Startup Settings → Restart.
2. Press 7 for "Disable driver signature enforcement."
3. Install drivers, then reboot normally.

Step-by-step:

1. Connect the E5573 to your Windows 10 computer using a micro-USB cable.
2. Power on the E5573.
3. Wait for Windows 10 to detect the new hardware. You will see a notification like “Setting up device.”
4. Windows 10 will attempt to automatically install the Huawei NDIS driver via Windows Update.

Expected result: In Device Manager, you should see a new category called “Network adapters” with an entry named Huawei Mobile Broadband Network Adapter or NDIS Internet Sharing Device.

If this works, you’re done. Your E5573 will now act like a USB modem. You can verify by checking your network connections – you’ll see a new Ethernet-like connection with internet access.

If automatic installation fails (yellow exclamation mark appears), proceed to the manual method below.

Important Notes

• No driver is needed for Wi-Fi use. The E5573 works purely as a wireless hotspot. Drivers are only for USB tethering or accessing the admin panel via USB.
• Windows 10 built-in drivers work for most users. If your internet works over USB without any pop-ups, your drivers are already fine.
• Older drivers may cause conflicts. If you previously installed Huawei modem drivers for Windows 7/8, uninstall them first and let Windows 10 install native drivers.