How To Reset Your Truck In Euro Truck Simulator 2 Top May 2026

To reset your truck in Euro Truck Simulator 2 (ETS2) , the most direct method is using the Assistance Service menu, typically accessed by pressing F7. This service allows you to call for help if you are stuck, flipped, or heavily damaged. 1. The Standard Recovery (F7 Menu)

The official way to reset your position is through the Route Advisor's "Service" tab.

How to do it: Press F7 to open the Service menu, then press Enter to call for assistance. Options:

Tow to Road: A newer feature (added in update 1.59) that transports you to the last safe location on the road nearby for a small fee.

Tow to Service: Tows your truck and trailer to the nearest city's service center.

Cost: This usually costs around €500 plus the time it takes to transport the vehicle.

Impact: While it delays your job, it does not cancel standard deliveries. However, be aware that calling for service during External Contracts (World of Trucks) may cancel the contract.

Watch this quick guide to see how the recovery and repair service works in-game: ETS 2 - ATS - Used Trucks & Repair Service Explained Roane Gaming YouTube• Dec 10, 2023 2. The "Quick Reload" Method

The most straightforward method is the in-game Emergency Assistance. This is the "official" way to reset your position if you are flipped, stuck, or out of fuel. how to reset your truck in euro truck simulator 2 top

How to do it: Press F7 to open the "Services" screen in your Route Advisor, then press Enter to call for assistance.

The Result: You and your trailer will be towed to the nearest service station.

The Cost: This service usually costs a fee (around €500) and advances in-game time significantly.

Note: If you are on a World of Trucks (External Contract), using F7 may occasionally force you to cancel the job depending on the severity of the position. 2. The "Cheat" Way: Developer Console & Teleportation

If you don't want to pay the towing fee or lose time, you can use the Developer Console to manually "reset" your truck to any nearby flat surface. Step 1: Enable the Console Go to your Documents folder > Euro Truck Simulator 2. Open the file config.cfg with a text editor like Notepad. Find these two lines and change their values from 0 to 1: uset g_developer "1" uset g_console "1" Save and close the file. Step 2: Use the "Free Cam" to Reset

In-game, press the "0" (zero) key on the top row of your keyboard to enter the free-roaming camera.

Move the camera using your Numpad (8, 4, 5, 6) and your mouse to position the camera just above the road in a safe, flat spot.

Once the camera is in the desired location, press Ctrl + F9 to teleport your truck to that exact spot.

Warning: Keep the camera close to the ground; dropping your truck from a height will cause 100% damage. 3. Resetting Your Truck's Economy (Fixing No Jobs) Steam Community Guide :: How to Reset Your Game's Economy - Steam Community

Euro Truck Simulator 2 (ETS2) , "resetting" your truck usually refers to recovering from a flip, getting unstuck from terrain, or relocating to a service center. Depending on whether you want a quick "realism" fix or a "cheat" method to save time and money, you have several options: 1. The Standard "F7" Recovery (Service)

The most common way to reset your truck is through the in-game Service and Assistance menu.

How to do it: Press F7, then press Enter to confirm the request for assistance.

Result: You and your trailer will be towed to the nearest service station for a fee. To reset your truck in Euro Truck Simulator

New "Tow to Road" Feature: In recent updates (1.59+), you can select a "Tow to Road" button under the F7 menu. This transports you to the last safe location on the road for a small fee, preventing the need to drive back from a distant city. 2. Loading an Autosave (The "Time Travel" Fix)

If you flip your truck or get stuck and want to avoid the towing fee or damage, loading a previous save is often the best solution.

How to do it: Go to the main menu, select "Load Game," and ensure the "Show autosaves" box is checked.

Result: Select an autosave from 5–10 minutes prior to your accident. This is highly effective for standard jobs, though it may not work for certain World of Trucks external contracts that save your position to a server.

3. The “Top” Full Reset – Return to Garage

This is likely what you mean by “reset your truck to the top” – meaning resetting your entire job and truck back to your home garage, canceling everything.

• Press F7 or open the menu and select “Call for Assistance”.
• Look for the button “Teleport to Garage” (this option only appears if you are not on an active job / have no trailer attached).
• Alternatively, if on a job: First cancel the job (Menu → Freight Market / Cargo Market → Cancel Contract – heavy penalty applies). Then press F7 → Teleport to Garage.

What this does: Your truck appears parked at your chosen garage (your “top” base), fully repaired. All jobs are canceled. You start fresh.

Introduction

Euro Truck Simulator 2 (ETS2) is renowned for its realistic driving mechanics, but even the most careful virtual drivers encounter problems. Whether you have flipped your trailer on a sharp German corner, gotten your 18-wheeler stuck on a roundabout in France, or run out of fuel just outside a service station, the question is the same: How do you reset your truck?

This paper provides a comprehensive, step-by-step guide on the three primary methods to reset your truck in ETS2, ranging from simple in-game commands to advanced console troubleshooting.

How to Reset Your Truck in Euro Truck Simulator 2

Whether you’ve taken a sharp corner too fast and flipped your rig, gotten stuck in a glitchy piece of scenery, or simply slid off the road into a ditch, knowing how to reset your truck is an essential skill for any trucker in Euro Truck Simulator 2 (ETS2).

While the game aims for realism, the "Auto Load" feature is your safety net when the simulation goes wrong. Here are the methods to get your truck back on the tarmac.

Method 3: The Developer Console Reset (The "Top Secret" Power User Trick)

This is what the veteran players and streamers use. It is the top method for absolute control. It allows you to reset your truck’s position without teleporting to a service center. You can literally put yourself back on the road in 3 seconds.

Warning: This requires enabling the developer console. It is not cheating; it is a debugging tool. It will not get you banned because ETS2 is a single-player game.

Summary: Which one should you use?

| Situation | Best Method | | :--- | :--- | | Upside Down | Method 1 (Tow Truck) or Method 2 (Console). | | Stuck on a Curb | Method 3 (Physics Nudge). | | Stuck inside a Model/Building | Method 1 (Tow Truck). | | Recent Crash (Regret) | Method 0 (F7 Quick Load). | | Total "I broke the game" Reset | Load the last manual save (F9 or Menu). | Press F7 or open the menu and select

Pro Tip: Don't underestimate the "Parking Brake". If you are sliding down a hill or glitching out, applying the parking brake (usually the . key) can sometimes force the game to recalculate the truck's physics and stabilize it.

Mastering the Reset: A Guide to Recovery in Euro Truck Simulator 2

In the world of Euro Truck Simulator 2 (ETS2), perfection is the goal, but reality—and physics—often have other plans. Whether you’ve miscalculated a tight turn in the Alps or found your Scania resting on its side after a high-speed lane change, knowing how to "reset" is a vital skill for any virtual trucker. Here is how to get back on the road when things go south. The Standard Procedure: Service Assistance

The most common way to reset your truck is by using the F7 menu. When you find yourself stuck, damaged, or overturned, pressing F7 brings up the "Garage and Service" screen. By hitting Enter, you request "Towing Assistance."

The game will then transport your truck and trailer to the nearest service station. While this is the most "realistic" method, it comes with two caveats: it costs in-game currency and, more importantly, it costs time. If you are on a tight delivery schedule, the hours added by the tow truck can lead to late penalties. The Professional’s Shortcut: Developer Camera

For those who prefer a "quick fix" without the repair bill or time jump, the Developer Camera (Free Cam) is the gold standard. This requires a quick one-time tweak to your game files: Go to your Documents/Euro Truck Simulator 2 folder. Open config.cfg with Notepad.

Change uset g_developer "0" to "1" and uset g_console "0" to "1".

Once in-game, press 0 to enter the free-roaming camera. Use your Numpad keys to fly the camera to a flat piece of road just above the ground. Press F9, and your truck will instantly teleport to that location. It’s the ultimate "reset" button for the impatient driver. Preventative Resets: Saving and Loading

Sometimes the best reset is a trip back in time. ETS2 features a robust Autosave system. If you experience a catastrophic wreck, hitting Escape and loading your most recent autosave (usually triggered every few minutes or at gas stations) can save you from a massive repair bill. It effectively "resets" the entire incident as if it never happened.

Whether you use the official F7 service call for immersion or the Developer Camera for efficiency, the ability to reset is what keeps a bad turn from ending your career. Every trucker hits a snag eventually; the pros just know how to get back to the asphalt the fastest.

The Golden Rule: The "F7" Trick

The absolute fastest way to "reset" your truck without reloading the game is using the "Quick Load" feature, but it requires a specific setup.

The Strategy:

1. Save the Game: Press F9 (or via the menu) to create a manual save.
2. Drive Safely for 3 Seconds: Move your truck to a safe spot on the road (away from collisions).
3. The Reset: Press F7 to "Quick Load."

Why this works: Many players think F7 is a "reset" button. It is actually a "Quick Load" button. It reloads your last autosave. If you haven't configured your autosaves, this might send you back 20 minutes. To make this a true "reset button," you need to change your settings:

• Go to Options > ** Gameplay**.
• Look for "Autosave interval".
• Set it to the lowest possible time (usually 5 or 10 minutes).
• Optional: Enable "Autosave on quick load".

Now, if you crash, just wait a few minutes for the game to autosave, then press F7. You will essentially "rewind" reality by a few minutes.