How To Hard Reset Mibro Kids P5 Link -

To hard reset the Mibro Kids P5 , you can use a hidden dial code, a specialized SMS command, or the companion application. Ensure the watch has at least 30% battery before starting to avoid software damage. Method 1: Dial Code (Easiest)

This method is the most direct way to perform a factory reset from the watch interface. Wake up the screen by pressing the Power button application on the watch. Enter the code exactly as shown. Call button A confirmation popup will appear; tap to begin the reset. Method 2: SMS Command

If the watch is paired with a phone and has a working SIM card, you can trigger a reset remotely via text message. Messages app on the phone paired with the watch.

Start a new conversation with the phone number assigned to the watch's SIM card.

Type one of the following commands exactly (case-sensitive) and send it: pw,123456,factory# pw,523681,factory#

If successful, the watch should reply with "factory ok, reset.." and begin the process. Method 3: Mibro Kids App

You can also initiate a reset through the device management settings on your phone. Mibro Kids app on your paired smartphone. Navigate to the Factory Reset Confirm your choice to wipe all data.

: You must also "Forget/Ignore" the device in your phone's Bluetooth settings to fully unbind it. Troubleshooting Frozen Screen : If the watch is unresponsive, perform a Soft Reset by holding the Power button for 10 seconds until it reboots. Forgotten PIN : A factory reset will

bypass a SIM PIN lock. If you are locked out of the SIM card, you must contact your service provider for a the watch to the Mibro Kids app once the reset is finished? AI responses may include mistakes. Learn more

Hard resetting the Mibro Kids P5 restores factory settings by erasing all data, either through a dialer code ( ), an SMS command ( pw,123456,factory#

), or via the Mibro Kids app. It is recommended to ensure at least 20-30% battery to prevent system errors. For a full guide and troubleshooting steps, visit HardReset.info How To Factory Reset Mibro Watch GS Pro ( Settings Method ) how to hard reset mibro kids p5 link

To hard reset a Mibro Kids P5 watch, you can special dial code remote SMS command , or use the paired mobile application

. Hard resetting will erase all personal data, apps, and settings, returning the device to its original out-of-the-box state. Essential Pre-Reset Checklist

Before proceeding, ensure the watch meets these requirements to avoid software damage: Battery Level : Ensure the watch is charged to at least (some models recommend 50%). Active SIM

: For SMS methods, a working SIM card capable of receiving messages must be inserted. Method 1: Using the Watch Dial Pad (Recommended)

This is the most direct way to perform a factory reset if you have access to the watch's interface. Power button to wake up the screen. Navigate to and open the Dial application Enter the code: Call button When the confirmation popup appears, tap to begin the reset. Method 2: SMS Remote Command

If the watch is paired but you cannot access its menu, you can trigger a reset by sending a text message from the administrator's phone. Messages app on the phone paired with the watch. Start a conversation with the phone number assigned to the watch's SIM card

Type and send one of the following commands (all lowercase): pw,123456,factory# pw,523681,factory#

The watch should reply with a confirmation such as "factory ok, reset..." and begin the process. Method 3: Using the Mibro Kids App If you prefer using the mobile interface, the Mibro Kids app can often initiate a reset remotely. Hard Reset MIBRO Kids P5

Method 2: Hard Reset Using Hardware Buttons (For Frozen Watches)

If the watch is completely frozen—the screen is stuck, black, or unresponsive to touches—you must use the physical buttons. This method forces the device to reboot into recovery mode.

Step 1: Ensure the Watch Has Battery Plug the magnetic charging cable into the watch. Let it charge for at least 10 minutes. A hard reset will fail if the battery dies mid-process. To hard reset the Mibro Kids P5 ,

Step 2: Power Off the Watch (Force Shutdown) Press and hold the Power/Side button for about 10–15 seconds. Do not let go until the screen turns completely black. This is a “hard power off.”

Step 3: Boot into Recovery Mode Once the watch is off, you need to enter the hidden recovery menu. This requires precise timing:

1. Press and hold the Power button.
2. As soon as the MiBro logo appears on screen, immediately start pressing the Power button repeatedly (rapid tapping) OR holding the Power and Volume Down buttons simultaneously.
   The exact button combo varies by firmware version; try the rapid-tap method first.

Step 4: Navigate the Recovery Menu (Screen may look basic) If successful, you will see a simple text-based menu (usually in English or Chinese) with options like:

• Reboot system now
• Wipe data/factory reset
• Wipe cache partition

Step 5: Select “Wipe data/factory reset”

• Use the Power button to scroll down through the options.
• Use the Side/Back button or Touchscreen (if responsive in recovery mode) to select.

Step 6: Confirm the Reset A confirmation screen will appear: “Delete all user data?” – Select Yes.
The watch will erase all files and then return to the main recovery menu.

Step 7: Select “Reboot system now” Use the Power button to scroll to “Reboot system now” and select it. The watch will restart fresh. If the first boot takes longer than 3 minutes, be patient—it is rebuilding system files.

Method 1: Hard Reset Using Hardware Keys (When Frozen)

Use this method if the watch is unresponsive or won’t boot.

1. Press and hold the Power/Home button for 10–15 seconds until the screen goes black and you feel a vibration.
2. As soon as the screen turns off, immediately press and hold both the Power button and the Back button (if available; otherwise, hold the Power button alone).
3. Keep holding until the Mibro logo appears, then release.
4. The watch will boot into recovery mode (usually a simple text menu).
5. Use the Touch Screen or Back button to navigate to “Wipe data/factory reset”.
6. Confirm by tapping or selecting “Yes”.
7. After the reset completes, select “Reboot system now”.

The Story of the Frozen Watch: A Guide to Hard Resetting the Mibro Kids P5

It usually happens at the worst possible time. Your child is excited to show you their step count, or they are trying to call you from a friend's house, and suddenly—the screen is stuck. Maybe the Mibro Kids P5 is frozen on the logo, or perhaps the touch screen has stopped responding. You try charging it, you try pressing buttons, but nothing works.

Before you consider replacing the device, there is one tried-and-true solution: The Hard Reset.

Here is the full story on how to bring your watch back to life. Press and hold the Power button

Method 3: Remote Hard Reset via the Parent App

If you cannot physically access the watch (e.g., the child lost it or the screen is broken), the MiBro app allows a remote reset as long as the watch has cellular data or Wi-Fi.

Step 1: Open the Parent App Launch the SeTracker2 or MiBro Care app on your smartphone. Log in with your parent account.

Step 2: Select Your Child’s Device On the dashboard, tap the icon for the P5 Link watch. Look for the Settings (three lines or gear icon) in the top right corner.

Step 3: Find the “Reset” or “Clear Data” Option Scroll down until you find an option labeled:

• Restore Factory
• Reset Watch
• Clear All Data

Step 4: Send the Command Tap the reset option. The app will ask you to confirm. Some versions require you to enter the admin password of the app (not the watch). Confirm again.
The watch will receive a silent SMS command (consumes a small amount of SIM credit) and will automatically begin the reset process within 30 seconds.

Step 5: Re-pairing Required After the remote reset, the watch will be disconnected from your app account. You must re-add the device using the new QR code that appears on the watch screen.

Why Would You Need a Hard Reset?

• Forgotten Password: Your child changed the screen lock code and can’t remember it.
• Glitchy Screen: The watch is lagging or unresponsive.
• Selling or Gifting: You want to wipe all personal data (contacts, messages, history) before passing it on.

⚠️ Warning: A hard reset will erase all data on the watch, including step counts, contacts, and chat history. However, data already synced to the MiBro Parent App on your phone will remain safe.

Act 3: The S.O.S. Method (Alternative)

If the standard button hold did not work, some firmware versions of the Mibro Kids P5 respond to an "S.O.S." style reset. This is often used if the watch is frozen on a specific screen.

The Steps:

1. Turn the watch over so the screen is facing down.
2. Look for the small Reset Pinhole (if your specific model variation includes one) OR simply use the side button.
3. Press the side button 5 times rapidly (within 3 seconds).
4. This triggers an "S.O.S." call attempt; usually, interrupting this process by holding the button down during the countdown can force a reset on some software versions.