To specify a custom wordlist instead of the default, you must use the --dict flag followed by the path to your desired text file.
Basic Command Syntax:sudo wifite --dict /path/to/wordlist.txt Key Considerations for Success
Default Wordlists in Kali: If you are using Kali Linux, several high-quality wordlists like rockyou.txt are pre-installed in /usr/share/wordlists/. Note that rockyou.txt is often compressed as a .gz file and must be extracted before use.
Full vs. Relative Paths: It is generally safer to use the absolute path (e.g., /home/user/Documents/list.txt) to avoid "file not found" errors, though relative paths work if you are already in the same directory as the wordlist.
Format Requirements: Custom wordlists must be plain text files with one password per line. Common Troubleshooting Issues
Directory Arguments: Wifite typically does not support passing a directory of multiple wordlists as an argument; it requires a single file. If you attempt to point to a folder, the tool may ignore the input or show a warning.
Missing Files: Users frequently encounter "dict not found" errors when the path is mistyped or the file is still compressed.
Permissions: Since Wifite requires root privileges to put your wireless card into monitor mode, you must run the command with sudo. Summary Table: Popular Wordlist Locations Wordlist Name Standard Kali Linux Path Rockyou /usr/share/wordlists/rockyou.txt Fern-Wifi /usr/share/fern-wifi-cracker/extras/wordlists/common.txt Wifite Default /usr/share/dict/wordlist-probable.txt (often symlinked) How To Change Wordlist In Wifite Review
To change the wordlist in Wifite, use the flag followed by the path to your desired text file. By default, Wifite often uses a smaller "probable" wordlist located at /usr/share/dict/wordlist-probable.txt Hacking Articles How to use a Custom Wordlist
You can specify a custom dictionary when launching the tool from the terminal: sudo wifite --dict /path/to/your/wordlist.txt Use code with caution. Copied to clipboard Common Wordlist Locations If you are using Kali Linux, popular wordlists like
are already pre-installed but may need to be uncompressed before use. Compressed path: /usr/share/wordlists/rockyou.txt.gz To extract: sudo gunzip /usr/share/wordlists/rockyou.txt.gz Full command example: sudo wifite --dict /usr/share/wordlists/rockyou.txt Permissions: Always run Wifite with
to ensure it has the necessary permissions to access network interfaces and files. File Format: Ensure your wordlist is a plain text file ( ) with one password per line. Alternative Flag:
In some older versions of Wifite, the flag may be shortened to extracting a specific one on your system? The WORDLIST file - spelling - Docs How To Change Wordlist In Wifite
Automating Wi-Fi Audits: Customizing Wordlists in Wifite Wifite is a popular automated tool designed for auditing wireless networks. While it excels at streamlining complex tasks like capturing handshakes and launching WPS attacks, its effectiveness during a brute-force or "dictionary" attack is entirely dependent on the quality of the wordlist provided. By default, Wifite may use a standard system path, but professional auditing often requires pivoting to more comprehensive lists like rockyou.txt or custom-generated sets. The Mechanics of Wordlist Integration
To change the wordlist in Wifite, you primarily interact with the tool through command-line flags. Wifite does not have a persistent "settings" menu in the traditional sense; instead, you define the dictionary path at the start of each session.
The Dictionary Flag: The most direct way to change the wordlist is using the --dict (or -dict) flag. This tells Wifite exactly which file to reference when attempting to crack a captured WPA handshake.
Command Syntax: A typical command to launch Wifite with a custom list looks like this:sudo wifite --dict /path/to/your/wordlist.txt
Global vs. Local Paths: You can use absolute paths (starting from the root /) or relative paths if the wordlist is in your current working directory. Why Changing the Wordlist Matters
The "default" lists included with many operating systems are often small and meant for testing rather than exhaustive auditing.
Targeted Auditing: If you are testing a network where you know the password follows a specific pattern (e.g., "CompanyYear2024"), a custom-generated wordlist will yield results significantly faster than a generic one.
Resource Management: Massive wordlists can slow down the cracking process. By switching to a medium-sized, high-probability list, you can balance speed and efficiency.
Handling Handshakes: It is important to note that Wifite first focuses on capturing the handshake. Once the handshake is saved to the hs/ directory, you can actually run Wifite again with a different wordlist against 그 specific capture without needing to remain near the target router. Best Practices for Success
When changing wordlists, ensure the file is in a plain-text format with one password per line. Compressed files (like .gz) must usually be extracted before Wifite can read them properly. Additionally, always run Wifite with sudo privileges to ensure it has the necessary permissions to access both the network interface and the local file system.
In conclusion, mastering the --dict flag is a fundamental skill for any security researcher using Wifite. It transforms the tool from a basic automated script into a surgical instrument capable of testing the true strength of wireless security configurations.
To change the wordlist in (or Wifite2), you must use the command-line flag followed by the full path to your custom dictionary file. By default, Wifite uses a internal list located at /usr/share/dict/wordlist-probable.txt Kali Linux Quick Command Syntax To specify a custom wordlist instead of the
Run the following command in your terminal to launch Wifite with a custom wordlist: sudo wifite --dict /path/to/your/wordlist.txt Key Options & Examples Using Rockyou : To use the popular rockyou.txt wordlist (standard on Kali Linux), use: sudo wifite --dict /usr/share/wordlists/rockyou.txt Cracking After Capture
: If you have already captured a handshake and want to crack it with a specific list later, you can use the sudo wifite --crack --dict /path/to/wordlist.txt Abbreviated Flag : Some versions of Wifite may accept instead of is the standard. Kali Linux Important Notes Single Wordlist
: Wifite generally only accepts one wordlist at a time via the command line.
: Ensure you provide the absolute path to your file. If your wordlist is in your current folder, you can just use its name (e.g., --dict passwords.txt Permissions : Always run Wifite with
to ensure it has the necessary permissions to access network interfaces and system wordlists. Kali Linux AI responses may include mistakes. Learn more wordlists | Kali Linux Tools
Contains the rockyou wordlist /usr/share/wordlists ・ rockyou.txt.gz ・ wifite.txt -> /usr/share/dict/wordlist-probable.txt. Kali Linux wordlists | Kali Linux Tools
To change the wordlist in Wifite (or Wifite2), use the --dict flag followed by the path to your custom file. By default, Wifite often looks for rockyou.txt in standard Kali Linux directories, but you can override this for any session. Direct Command To start Wifite with a specific wordlist: sudo wifite --dict /path/to/your/wordlist.txt Use code with caution. Copied to clipboard 🛠️ Step-by-Step Guide 1. Locate Your Wordlist Ensure you know the exact absolute path to your file.
Default Kali Wordlists: Usually found in /usr/share/wordlists/.
Custom Wordlists: If it's on your desktop, the path might be ~/Desktop/my_list.txt. 2. Unzip if Necessary
Many pre-installed wordlists (like rockyou.txt.gz) are compressed. You must extract them before Wifite can read them: sudo gunzip /usr/share/wordlists/rockyou.txt.gz Use code with caution. Copied to clipboard 3. Run Wifite with the Flag Open your terminal and use the --dict (or -dict) argument.
Example for Rockyou:sudo wifite --dict /usr/share/wordlists/rockyou.txt
Example for a custom file:sudo wifite --dict /home/kali/Downloads/custom_passwords.txt 4. Verify in the UI Download a wordlist (e
Once Wifite captures a handshake, it will begin the cracking process. It should display the path of the wordlist it is currently using in the status lines. 💡 Pro Tips
Combine with other flags: You can use --dict alongside other filters, like --wpa to only target WPA networks:sudo wifite --wpa --dict /path/to/list.txt
Check all options: To see every available command, run wifite -h or visit the official Kali tool page .
Use Hashcat/Aircrack-ng: Wifite is a "wrapper." If you have a specific handshake file and a massive wordlist, it is often faster to run aircrack-ng or hashcat directly on the captured .cap or .hc22000 file GitHub .
Let’s walk through a complete example: changing the wordlist to a custom 10‑million‑password file and running an attack.
Download a wordlist (e.g., from Weakpass):
wget https://weakpass.com/wordlists/rockyou.txt -O /opt/weakpass_10m.txt
Verify it’s intact:
wc -l /opt/weakpass_10m.txt
Launch Wifite with the new wordlist:
sudo wifite -dict /opt/weakpass_10m.txt
Select your attack type (WPA/WEP/WPS) and let Wifite scan.
After capturing a handshake, Wifite will automatically use /opt/weakpass_10m.txt to crack it.
Result: Success or failure displayed on screen.
-dict Flag (Command Line)Run Wifite with the -dict option followed by the full path to your wordlist:
sudo wifite -dict /path/to/your/wordlist.txt
Example:
sudo wifite -dict /home/kali/rockyou.txt
If your wordlist is in a root-protected folder (like /usr/share/wordlists), ensure you are running Wifite with sudo or as root.