Goke GK7102 is a high-definition IP camera System-on-Chip (SoC) designed for affordable surveillance solutions like smart doorbells and Wi-Fi cameras. It typically supports video encoding at 720p or 960p resolutions at 30fps using the H.264 standard. Unifore Security Key Technical Specifications Processor Core: ARM1176 @ 600MHz with 16KB I-Cache and 16KB D-Cache. Integrated 512Mb DDR2 RAM. Video Encoding:
Supports H.264 (BP/MP/HP) and MJPEG/JPEG. It can handle up to 4 encoding streams simultaneously (e.g., 960P + VGA + QCIF + JPEG).
Integrated Audio Codec supporting G.711, G.726, ADPCM, and MP3. Image Processing (ISP):
Features 3D noise reduction, Wide Dynamic Range (WDR), lens correction, and "3A" (Auto Exposure, Auto White Balance, Auto Focus). Intelligent Features:
Hardware-level support for motion detection and face detection. Connectivity:
Integrated Ethernet PHY and support for external Wi-Fi modules like the MediaTek MT7601 BGA228 (11mm x 11mm) manufactured on a 40nm process. Unifore Security Hardware Variations
A lower power consumption version often found in battery-powered smart doorbells. GK7102C / CA / CT / CW: Minor variants of the base SoC architecture.
For developers looking to customize these devices, projects like provide firmware support, and GitHub community discussions
Goke GK7102 is a high-definition IP camera System-on-Chip (SoC) manufactured by Goke Microelectronics. It is widely used in smart doorbells, Yoosee Wi-Fi cameras, and low-cost security camera modules. gk7102 datasheet
The key specifications and details for the GK7102 SoC are outlined below: 🔲 Core Architecture CPU Core: ARM1176 processor running at 600 MHz.
Cache: 16 KB Instruction Cache (I-Cache) and 16 KB Data Cache (D-Cache). Process Technology: 40 nm fabrication. Package: BGA228 package (11 mm x 11 mm).
Integrated Memory: Features embedded 512 Mb (64 MB) DDR2 RAM (meaning no external DDR chip is required on the board). Low Power Variant: The and
variants are optimized for battery-operated devices like wireless video doorbells. 👁️ Image Signal Processor (ISP) & Intelligence
Image Processing: Supports Auto White Balance (AWB), Auto Exposure (AE), Auto Focus (AF), Wide Dynamic Range (WDR), 3D noise reduction,
(gamma) conversion, RGB filter, dead pixel correction, black level correction, and lens distortion correction.
Supported Sensors: Works with various CMOS image sensors such as Sony, Aptina, OmniVision, and SmartSens (e.g., AR0130, OV9712, H42, SC1035, SC1135).
Embedded Analytics: Features hardware-based motion detection, face detection, perimeter guarding, and remnants (left-behind object) recognition. 🎬 Encoding Capabilities Goke GK7102 is a high-definition IP camera System-on-Chip
Video Formats: Supports H.264 Baseline / Main / High Profiles, as well as MJPEG and JPEG.
Multi-Stream Support: Capable of processing up to 4 encoding streams simultaneously:
Option A: 960P @ 30fps + VGA @ 30fps + QCIF @ 30fps + 960P JPEG @ 1fps.
Option B: 720P @ 30fps + VGA @ 30fps + QCIF @ 30fps + 720P JPEG @ 1fps. Audio Formats: Support for G.711, G.726, ADPCM, and MP3. 🔌 Interfaces & Integration
Networking: Integrated Ethernet PHY (Physical Layer) and supports standard P2P transmission modes for easy mobile phone remote access. Audio: Integrated Audio Codec.
Hardware Accelerators: Dedicated AES, DES, and 3DES security engines.
OS Support: Typically paired with an embedded Linux OS or eT-Kernel.
org/cameras/vendors/goke">OpenIPC or hardware pinouts for the GK7102 processor? AI responses may include mistakes. Learn more Goke HD IP Camera Solution GK7101 GK7102 - Unifore Frequently paired with low-cost CMOS sensors such as
The GK7102 is a High Definition (HD) IP camera System-on-Chip (SoC) developed by Goke Microelectronics. It is primarily used in budget-friendly Wi-Fi security cameras (such as those using the Yoosee app) and supports 720p or 960p video processing. Key Technical Specifications Processor ARM-based main processor (often paired with Embedded Linux) Video Encoding H.264 / Smart H.264+ multi-stream encoding Resolution Support Up to 1080P (2.0MP), 960P (1.3MP), or 720P (1.0MP) @ 30fps Audio G.711 / G.711A standard; supports two-way speech Image Processing
WDR (Wide Dynamic Range), 3D Noise Reduction, Lens Correction Connectivity 10/100M Ethernet (RJ45), Wi-Fi (802.11b/g/n) Storage MicroSD/TF Card support up to 64GB/128GB, Cloud storage Protocols TCP/IP, RTSP, ONVIF, P2P Common Hardware Integration
Sensors: Frequently paired with CMOS sensors from Sony, Aptina, or OmniVision (e.g., AR0130, OV9712, SC2035). Wi-Fi Modules: Often used with the MT7601 Wi-Fi module.
Operating System: Typically runs an embedded Linux OS system.
For deeper technical documentation, you can refer to community-driven resources like the zsgx1hacks GitHub repository, which discusses SDK versions and hardware configurations for GK710X devices. Goke HD IP Camera Solution GK7101 GK7102 - Unifore
The GK7102 is a High Definition Video Encoder SoC (System on Chip) manufactured by Goke Microelectronics. It is widely used in the IP security camera and DVR (Digital Video Recorder) industry.
Here is a summary of the specifications and features typically found in the GK7102 datasheet, along with information on how to find the full document.
While the GK7102 is competent, a critical reading of the datasheet reveals limitations. The absence of a built-in Ethernet PHY increases external component cost. More significantly, the lack of hardware support for H.264 High Profile or any form of smart analytics (such as neural network acceleration) means that motion detection must be done by frame differencing in software on the ARM9 core, consuming CPU cycles that could otherwise be used for network streaming. For 2024 standards, the chip lacks support for modern security features like secure boot or TrustZone, making it vulnerable to firmware extraction.
Beneath the "Absolute Maximum Ratings" table, you will find the survival limits. Here are the non-negotiable values: