Gent Vigilon Commissioning Tool Install

To install the Gent Vigilon Commissioning Tool, you must be a registered Gent System Integrator or an approved partner

. The software is not publicly available for general download and requires official training and certification to access. My Honeywell Buildings University Installation Steps

If you have authorized access, follow these general steps found in the Gent Commissioning Tool User Guide Locate the Installer : Log in to the Honeywell Gent Download Centre to find the latest version of the "Commissioning Tool". Select Architecture : Open the installation folder and choose either the folder based on your operating system. : Double-click the

file to begin the wizard and follow the on-screen instructions. Install Drivers gent vigilon commissioning tool install

: After the software installation, you may need to manually install USB drivers for specific panels (e.g., Nano panels) via the Start Menu under the Commissioning Tool folder. gentexpert.co.uk System Requirements & Connection Operating System

: Historically compatible with Windows XP Professional and later. Hardware Connection : The tool typically connects to the Vigilon panel using a method for configuration transfers. Access Control

: Features secure engineer access with audit trails to protect system configurations. How to Get the Software To install the Gent Vigilon Commissioning Tool, you

If you do not already have the tool, you must follow the official route: Become a System Integrator : Apply via Honeywell Gent to meet their criteria. Complete Training : Engineers must attend a multi-day Gent Certification Training course covering panel setup and programming. Third-Party Support

: If you are a facility manager or non-certified engineer, you may need to subcontract a qualified integrator for software-related changes. Honeywell Building Automation Do you need help finding an approved Gent partner in your local area to assist with a panel commissioning? Vigilon Plus Basic Commissioning Training

Vigilon Plus Basic Commissioning Training. Page 1. Vigilon Plus. Basic Commissioning Training. Page 2. Technical Support Helpline. My Honeywell Buildings University Nano Commissioning Tool 25-Mar-2010 — Plug the SMS dongle into a USB port (use a USB 2

For SMS Interface (Legacy)

  1. Plug the SMS dongle into a USB port (use a USB 2.0 hub if possible – USB 3.0 often fails).
  2. In Device Manager, look for the SMS driver under "Universal Serial Bus devices."
  3. In the Commissioning Tool, select SMS instead of COM port.
  4. Click "Identify Panel." The loop LEDs should flash if successful.

Introduction to Gent Vigilon Commissioning Tool

The Gent Vigilon commissioning tool is a software application designed to work with the Vigilon range of fire detection and alarm systems manufactured by Gent. The tool is essential for installers and commissioning engineers to ensure that the system is set up according to the specific requirements of the building or site. It allows for the configuration of system parameters, testing of detectors and sounders, and verification of system integrity.

Configuring the Comm Port

  1. Connect your USB-to-Serial (RS232) cable to the Vigilon panel.
  2. In Windows Device Manager, note the COM port number (e.g., COM4).
  3. Open the Commissioning Tool. Go to System > Communication Setup.
  4. Select Serial (not TCP/IP unless using a network card).
  5. Set Baud Rate to 19200, Data Bits 8, Parity None, Stop Bits 1.
  6. Click "Test Connection." You should see "Panel responds OK."

1. Operating System Requirements

  • Windows 10/11 Pro (Home edition is not officially supported).
  • Language: The software expects English (United States) regional settings. Mismatched decimal symbols (comma vs. period) can break the database connection.
  • Architecture: 64-bit OS required for v4+.

The Ultimate Guide to Gent Vigilon Commissioning Tool Install: Step-by-Step for Engineers

Meta Description: Master the Gent Vigilon commissioning tool install process. This guide covers system requirements, software setup, hardware connections (USB/SMS), driver fixes, and troubleshooting for the Vigilon loop controller.

Step 2: Run the Installer

  1. Insert the Gent CD or mount the ISO.
  2. Navigate to the root folder and locate Setup.exe.
  3. Right-click Setup.exe and select "Run as Administrator."
  4. If a SmartScreen warning appears, click "More info" then "Run anyway."