Firstchip Fc1178 Fc1179 Mptools V1052 Install -

FirstChip MPTools v1.0.5.2 is a specialized mass production (MP) tool used primarily to repair corrupted USB flash drives, restore factory capacity, or fix "No Media" errors on drives using FirstChip FC1178 controllers. 1. Preparation Before starting, ensure you have the following: Identify Your Controller : Use a tool like ChipGenius to confirm your USB uses the controller. System Environment

: Use a Windows PC (Windows 10/11 is generally compatible). It is recommended to use a rear USB 2.0 port for a stable power supply.

: Disable antivirus software temporarily, as these tools are often unsigned and may trigger false positives. 2. Download and "Install" FirstChip MPTools is a portable application and does not require a traditional installation process. Obtain the Software

: You can find legitimate versions on specialized sites like

: Unzip the downloaded archive into a folder on your local drive (avoid running it directly from the USB you are trying to fix). 3. Basic Configuration FirstChip_MpTools.exe (or similar executable in the folder) as an Administrator Interface Language

: If the tool opens in Chinese, look for a language dropdown in the top-right corner to switch to Detect Drive

: Insert your USB drive. It should appear in one of the tool's numbered slots. : Click the button (default password is often blank,

: Initially select "Standard Scan." If that fails, some users recommend a "Factory Scan" for deep repairs.

: Ensure the Flash ID matches what was reported by ChipGenius. 4. Execution and Repair : Click the

button on the main screen to begin the low-level formatting and firmware reflashing process. : The tool will cycle through stages: Download FW → Erase → Program → Verify → Format Completion : Wait for the status to turn Green (PASS) . If it turns Red (FAIL)

, check the error code (e.g., Code 31/33 often indicates an unsupported Flash ID). 5. Post-Repair

Once finished, safely remove the drive and re-insert it. Windows should detect it as a new "USB Mass Storage Device" with its original factory capacity restored. specific error code you encountered during the scanning process? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01) firstchip fc1178 fc1179 mptools v1052 install

The FirstChip FC1178/FC1179 MPTools v1.0.5.2 is a specialized mass production (MP) utility used to repair or format USB flash drives using FirstChip controllers. Released around June 2022, this version introduced several performance optimizations and expanded support for newer NAND flash memory. Key Features of v1.0.5.2

Expanded Controller Support: Primarily supports FC1178 and FC1179 (and the latest 1179s) masters.

3D Flash Optimization: Improved stability for hy 3D (Hynix) and TS 3D (Toshiba) flash, with a specific focus on speed priority during mass production.

Enhanced Yield Rates: Improved card opening yield for mainstream MLC models and optimized support for N38/B47R processes.

Interface Additions: Includes a custom lock disk feature and real-time display of the current configuration name on the interface.

Performance Testing: Integrated tools to test write and read speeds directly within the utility.

Bug Fixes: Resolves issues with "Error Code 2" in previous versions and improves stability for VCCQ 1.2V/1.8V flash read ID exceptions. Installation & Usage Guide

The MPTools utility is a portable "no installation" application, meaning it does not require a standard Windows setup process.

Preparation: Use a tool like ChipGenius to confirm your USB drive's VID, PID, and Controller Part-Number (e.g., FC1178BC or FC1179).

Deployment: Extract the downloaded .rar or .zip archive to a folder on your local drive. Avoid running it directly from a USB stick.

Launching: Open the folder and run the primary executable (typically FirstChip_MpTools.exe). Configuration: FirstChip MPTools v1

Click Settings (usually requires no password or a default like "123456").

Under Scan Settings, choose "Standard Scan" for initial identification or "Factory Scan" for deep formatting.

Select the Flash ID that matches the results from ChipGenius.

Execution: Return to the main window and click Start. The tool will re-flash the firmware and set aside bad blocks, which may result in a slightly smaller but functional partition.

Important Warning: Using these tools will wipe all data on the USB drive. They are intended for hardware repair (e.g., "No Media" or capacity errors) rather than data recovery.

The FirstChip FC1178/FC1179 MPTools is a mass production utility used primarily to repair corrupted USB flash drives, restore "fake" capacity drives to their actual size, or fix "No Media" errors. Version V1.0.5.2 (released around June 2022) is one of the more current versions compatible with these specific controllers. Installation and Deployment

Unlike standard software, MPTools typically do not require a traditional installation process.

Portability: The tool is usually distributed as a compressed ZIP or RAR archive. You simply extract the contents to a folder on your local drive and run the main executable (often named FirstChip_MpTools.exe).

Execution: It is highly recommended to run the tool from your computer’s internal drive rather than the USB drive you are trying to repair.

Security: Because these tools interact with hardware at a low level, they are frequently flagged as "False Positives" by antivirus software. You may need to temporarily disable real-time protection or add the folder to your exclusions list. Prerequisites & Preparation

Verification: Confirm your drive uses the FC1178 or FC1179 controller using a diagnostic tool like ChipGenius. Scan the downloaded ZIP with VirusTotal

Backup: Ensure any critical data is backed up elsewhere, as the mass production process erases all data on the NAND chip.

Stability: Use a stable USB port (preferably on the back of a desktop PC) to ensure a consistent power supply during the flashing process. Typical Repair Workflow

Initial Scan: Open the tool and select Standard Scan in the settings. This identifies the chip and its current state.

Factory Scan: If the standard scan fails or shows incorrect capacity, users often switch to Factory Scan to perform a deeper reset of the NAND cells.

Capacity Correction: In the "Bin" or "Capacity" tabs, you can often set the target size. If the drive was a "fake" 2TB drive that is actually 16GB, you would select the appropriate lower value to ensure stability.

Flashing: Click "Start" and wait for the process to reach 100%. Do not unplug the drive until the status indicator turns green or shows "Success." Common Troubleshooting

Password Prompt: If the "Settings" or "Setup" window asks for a password, try leaving the field blank or using 123456.

Device Not Found: If the software does not see your drive, try different USB ports or ensure you are running the tool with Administrator privileges.

Low-Level Format Time: Depending on the scan mode and NAND quality, the repair can take anywhere from 15 minutes to several hours.

Here is the information regarding the FirstChip FC1178/FC1179 MPTools v1.0.5.2, including what it is, how to use it, and important safety warnings.

Security Check:

Step 3: Install the FirstChip Driver

  1. Navigate to the Driver folder inside the extracted tool.
  2. Right-click InstallDriver.exe and select Run as administrator.
  3. A command prompt window will appear. You might see messages like “Driver installed successfully” or “Failed to install.” If it fails, proceed to manual driver install.

Manual driver install (if auto fails):

Step 1: Verify Your Controller

Before using the tool, confirm your drive actually uses a FirstChip controller.

  1. Download a tool called ChipGenius (v4.0 or later).
  2. Insert your USB drive.
  3. Look at the "Controller Vendor" and "Controller Part-Number".
  4. If it says "FirstChip" and "FC1178" or "FC1179", you have the correct tool.

2.1. Installation Manager

1. Verify the Controller Chip

Do not guess the controller model. You must verify that your USB drive actually uses a FirstChip controller.