Fagor Eco Plus Fa 15-20 Manual Official

The Fagor Eco Plus FA 15-20 is a microprocessor-controlled, wall-hung gas combination boiler designed to provide both central heating and domestic hot water (DHW). It is frequently used in specialized settings such as caravan holiday homes and park homes due to its compact design and high efficiency. Key Technical Specifications

The boiler operates as a fully modulating unit, meaning it automatically adjusts gas consumption based on heat demand.

Heat Output: Up to 23.7 kW (80,840 Btu/h), with priority always given to hot water supply.

Fuel Type: Standard models are often supplied for use with Propane gas. Water Temperature Ranges: Heating Circuit: Adjustable from 60°C to 85°C. DHW Circuit: Adjustable from 35°C to 60°C.

Operating Pressure: The system pressure gauge should ideally indicate between 0.75 and 1 bar when cold. Core Components

The FA 15-20 features several advanced safety and performance components:

Heat Exchanger: Built with copper for efficient heat transfer. Fagor Eco Plus Fa 15-20 Manual

Safety Features: Includes an overheat protection system, a pressure relief valve, and a differential air pressure switch that prevents ignition if there is insufficient airflow.

Electronic Control Board: Acts as the "brain," managing flame sensing and operational sequences.

Circulation Pump: Equipped with a manual anti-seizure device. Operational Basics

Summer Setting: Used only for domestic hot water; the burner fires automatically when a hot tap is opened. Winter Setting: Enables both central heating and hot water.

Manual Override: The timeswitch typically has three positions: I (Permanently On), Middle (Timed), and O (Permanently Off). Common Troubleshooting & Maintenance Am looking for a thermocouple for a fagor 15/20 central

While a direct digital manual for the Fagor Eco Plus FA 15-20 specifically can be elusive, the Fagor FEB-20E EcoPlus The Fagor Eco Plus FA 15-20 is a

serves as the primary technical reference for this series. Below is a helpful guide based on official technical documentation for troubleshooting and operating these boilers. Common Troubleshooting & Safety Appliance Lock-Out

: If the boiler detects an ignition malfunction, it will switch off automatically and a red indicator light will appear. How to Reset : To restart the system, press the restart switch

; the red light should turn off and the ignition sequence will repeat. Air in the Pipes

: If you have just installed a new gas bottle or left the boiler idle for a long time, air might be trapped. You may need to repeat the ignition/reset operation several times to vent the air. FREE BOILER MANUALS Essential Operating Pressure

Monitoring your boiler's pressure is critical for both safety and efficiency: Ideal Range : Your gauge should ideally read between 1 and 1.5 bar when the system is cold. High Pressure Warning : If the pressure reaches the "Red Zone" (typically above 30 PSI or 2.5 bar

), the boiler is at risk of component failure. Contact a professional if it stays this high. Low Pressure Fix : If the pressure is too low, use the filling loop Add ingredients and required liquid to the pot

to add water until the gauge returns to the 1–1.5 bar range. www.topnotchplumbingllc.com Efficient Settings

: Using this setting optimizes energy consumption and is generally cheaper to run than "comfort" modes without sacrificing home warmth. Manual Resources

For full technical specifications, wiring diagrams, and professional fault-finding codes, you can view the complete documentation here: Fagor FEB-20E EcoPlus Boiler Manual (Scribd)

Fagor EcoPlus User & Technical Instructions (FreeBoilerManuals) Are you seeing a specific error code warning light on your display right now?

feb-20e uk ecoplus user instructions and technical instructions

Step 1: Preparation

Step 4: Heating and Pressurization

Monthly Maintenance:

4. Control Panel Overview

The Fagor Eco Plus FA 15-20 features a user-friendly interface designed for rapid cycle selection.

  1. Display Screen: Shows cycle time remaining, temperature, and error codes.
  2. Program Selector Dial: Used to choose between Pre-wash, Main Wash, Rinse, and specialized Eco cycles.
  3. Temperature Selector: Adjusts wash temperature (Cold to 90°C).
  4. Start/Pause Button: Initiates or pauses the current cycle.
  5. Eco Plus Button: Activates the energy-saving mode, optimizing water usage and extending cycle time slightly for efficiency.
  6. Signal Lamps: Indicators for "Door Locked," "In Progress," and "End of Cycle."

5.2 Starting a Cycle

  1. Turn the Program Selector to the desired cycle (e.g., "Cottons," "Synthetics," "Eco").
  2. Adjust the Temperature Selector as needed.
  3. Press the Start button. The "Door Locked" lamp will illuminate, and the machine will begin filling with water.

3.2 Electrical Connection

The machine must be connected to a dedicated circuit breaker with the appropriate amperage rating. An earth connection is mandatory. Verify the rotation direction of the motor upon startup (if applicable).