Epson M1170 Adjustment Program !!better!! — Download

The Epson M1170 is a robust monochrome EcoTank printer, but like many inkjet models, it eventually triggers a "Service Required" error. This occurs when the internal waste ink pad counter reaches its limit, effectively locking the printer to prevent ink overflow. The Epson M1170 Adjustment Program (also known as a Resetter or AdjProg) is the specialized utility used by technicians to reset these counters and perform deep-level maintenance. Why You Need the M1170 Adjustment Program

When your printer stops and displays messages like "A printer's ink pad is at the end of its service life," standard head cleanings will not help. You need this program to:

Reset Waste Ink Counters: Clear the "Washing Pad Counter" or "Main Pad Counter" back to 0%.

Initialize New Parts: Required when replacing a mainboard or print head to sync them with the printer's firmware.

Advanced Cleaning: Perform "Power Cleaning" far more intensive than the standard maintenance tab options. Where to Download the Program

Official reset tools are rarely provided for free by Epson for home use; they typically require you to visit an authorized service center. However, several third-party and community-trusted options exist:

Epson M1170 Adjustment Program (also known as a Resetter or WIC Reset Utility) is a specialized tool used to address "service required" errors and maintain print quality when standard software settings are insufficient. Primary Functions and Use Cases

The software is primarily used to bypass hardware lockouts and perform deep system maintenance: Waste Ink Counter Reset:

This is the most common use. Over time, the printer's internal waste ink pads fill up. A digital counter tracks this usage and eventually locks the printer to prevent ink overflow. The adjustment program allows users to reset these counters back to 0%, enabling the printer to function again. Maintenance and Quality Adjustment: Beyond resetting, the utility provides functions for: Advanced Printhead Cleaning:

Offers varying levels of cleaning intensity (weak, middle, and strong) to fix persistent blurry prints or clogged nozzles. Initial Ink Charging: Required during the first setup or after major repairs. Firmware and Configuration: epson m1170 adjustment program download

Enabling "chipless" printing (disabling cartridge chips) or writing new serial numbers/EEPROM data. Downloading and Safe Execution

Downloading the program requires caution, as these tools are often hosted on third-party sites rather than the Official Epson Support Site

Epson M1170 Adjustment Program (also known as a "Resetter") is a specialized utility used by service technicians to perform maintenance tasks, most commonly resetting the "Service Required" error caused by a full waste ink pad counter. Download and Official Support

While third-party resetters exist, Epson officially recommends replacing the hardware maintenance box for this specific model, as it contains an IC chip designed for user replacement.

For the Epson EcoTank M1170, the standard "Epson Adjustment Program" (also known as a resetter) is primarily used for deep-level service tasks like print head alignment and mainboard initialization. However, it is important to note that for this specific model, the adjustment program does not include a function to reset the Main Waste Ink Counters. Available Software Options

Official Support Utilities: For general maintenance, firmware updates, and standard drivers, you should use the official Epson Support Page.

WIC Reset Utility: This is a third-party tool often used to read diagnostic reports, check ink pad levels, and perform print head cleanings.

Service Adjustment Program: Original service utilities (like those from ORPYS) are designed for technical repairs, such as prescribing a new print head ID or initializing a new mainboard. Critical Maintenance Note

The M1170 uses a physical Waste Ink Maintenance Box with its own IC chip. When you encounter the "service life" error for ink pads: The Epson M1170 is a robust monochrome EcoTank

Physical Replacement: It is recommended to replace the maintenance box entirely.

Chip Resetter: You may need a physical chip resetter device or a new box, as most software adjustment programs for this model cannot reset this specific chip. General Usage Steps for Adjustment Programs

If you have downloaded a compatible service tool for other adjustments: Epson ET-M1170 | Support

The Epson M1170 Adjustment Program (also known as a resetter) is a third-party utility used primarily to fix "Service Required" errors by resetting the internal waste ink pad counter

. While Epson does not officially provide this software to the public, several third-party platforms offer it to help users bypass permanent lockouts when the printer reaches its service limit. Core Functions of the Adjustment Program Waste Ink Pad Reset

: Restores the counter to 0% when the printer stops due to a full maintenance box. Printhead Maintenance

: Allows for advanced cleaning cycles (Weak, Middle, Strong) to fix blurry or inconsistent print quality. EEPROM Operations

: Enables reading and writing printer settings directly to the internal memory, though this carries a risk of permanent damage if misused. How to Use the Program Preparation

: Download the utility and ensure your printer is connected via USB. You may need to temporarily disable antivirus software , as these tools are often flagged as potential threats. AdjProg.exe file, click , and choose the model and appropriate port. Adjustment Mode Particular Adjustment Mode and select Waste ink pad counter from the list. Title: A Lifesaver for Your Printer, But Handle

: Check the boxes for the Main and Platen pad counters, click to verify levels, and then click Initialize to reset them. : Turn the printer off and back on to complete the process. Trusted Sources & Utilities

While various websites host these files, the following are frequently cited by user communities:

Title: A Lifesaver for Your Printer, But Handle with Care

Rating: ★★★★☆ (4/5)

If you own an Epson M1170 monochrome inkjet printer, you will eventually encounter the dreaded "Service Required" error, usually accompanied by the alternating red lights. When this happens, the official solution is often to take the printer to a service center, where the repair cost can sometimes exceed the value of the printer itself. This is where the Epson M1170 Adjustment Program comes in.

Here is my review after using the tool to reset the waste ink pad counter.

What is the Epson M1170 Adjustment Program?

The Adjustment Program is a service-level utility designed for Epson technicians. It bypasses the standard user interface and communicates directly with the printer's firmware. For the M1170 model, this tool is essential for three main tasks:

  1. Waste Ink Pad Counter Reset: The M1170 uses an internal maintenance box to absorb excess ink during cleaning cycles. When the printer counts 100% full, it locks up. The adjustment program resets this counter.
  2. Initial Ink Charge: If you replace a printhead or flush the ink system, you need to run a "Initial Fill." The adjustment program triggers this process.
  3. EEPROM Repair: It can read and write the printer’s EEPROM (memory chip) to fix corrupted data causing boot loops.

Important Note: Epson does not officially release this software to the public. Using it voids your warranty if the printer is still covered.

✅ Recommended Actions Instead of Downloading

  1. Contact Epson Support – Explain your error. They may provide a reset code or service option.
  2. Visit an authorized service center – They have the official tool and will perform the reset properly.
  3. Check your maintenance box – On the M1170, the waste ink box is user-replaceable (part number T6710 or similar). Replacing it often automatically resets the counter without any adjustment program.
  4. Use Epson’s official software – Some Epson printers now include a counter reset in the firmware when a genuine maintenance box is installed.

How to Use It (Basic Steps)

  1. Turn on the printer and connect it via USB (Wi-Fi typically does not work for this program).
  2. Put the printer into Service Mode (usually by holding a specific button combination while powering on – check your model's service manual).
  3. Run the Adjustment Program as Administrator (Windows only; no Mac version).
  4. Select your printer model and USB port.
  5. Click "Waste ink pad counter" → "Check" → "Initialization".
  6. Turn the printer off and on again.

Step 3: Enter Service Mode (Crucial)

This is the most common failure point.

  1. Turn off the printer (but keep it plugged in).
  2. Hold down the "Stop" and "Power" buttons simultaneously.
  3. While holding "Power," release "Stop," then press "Stop" three times in a row.
  4. Release the "Power" button.
  5. The LCD will go blank or show "Service Mode." You are now ready.