L4150 L4160 L4170 Resetter Adjustment Program Upd | Epson

⚠️ Critical Warning
This program resets the printer’s internal waste ink pad counter. It does not physically clean or replace the pads. If pads are already saturated, ink may leak inside the printer, causing damage not covered by warranty. Use only when you see “Service required: Ink pad is at end of life” or a similar error.

Troubleshooting Common Errors

| Error | Solution | |--------|-----------| | “Communication error” | Use USB, not Wi-Fi. Reinstall printer driver. | | “Wrong model selected” | Exit and re‑select correct L41xx model. | | Program does not open | Disable antivirus/Windows Defender SmartScreen. | | Counter not resetting | Run program in Windows 7 compatibility mode. |

Epson L4150 / L4160 / L4170 Resetter (Adjustment) Program — Full Post

Warning: Using resetter/adjustment programs can void warranties, may violate local laws, and can damage printers if used incorrectly. Proceed at your own risk. Do not use pirated or untrusted software; prefer official service tools and authorized service centers when possible. epson l4150 l4160 l4170 resetter adjustment program upd

Conclusion

The Epson L4150 L4160 L4170 resetter adjustment program UPD is an essential tool for extending the life of your EcoTank printer beyond its "official" service limit. However, it is a double-edged sword.

To recap:

• You need the UPD (Updated) version for modern firmware.
• Always replace the physical maintenance box before resetting.
• Protect your PC from malware by scanning every download.
• If you aren’t tech-savvy, pay $10 for WICReset or hire a local technician.

By following this guide, you can safely reset your waste ink counter and get another 2-3 years of printing from your Epson L4150, L4160, or L4170.

Disclaimer: This article is for educational purposes only. Modifying your printer may void the warranty. The author is not responsible for damage caused by incorrect use of adjustment software. Always create a system restore point before downloading third-party tools. ⚠️ Critical Warning This program resets the printer’s

It sounds like you’re looking for the adjustment program (resetter/initialization tool) for Epson L4150, L4160, L4170, specifically an updated version to reset the waste ink pad counter or perform other service adjustments.

Here’s the direct, practical information you need: Troubleshooting Common Errors | Error | Solution |

Key Steps to Use the Program

1. Run as Administrator
2. Select USB-connected printer
3. Go to Particular adjustment mode → Waste ink pad counter
4. Click Check → Initialization (reset)
5. May need to enter a key or expiration date fix (cracked versions exist)

Where to Find a Working Updated Version

Official sources no longer provide this publicly, but common working versions circulating are:

• Adjustment Program v1.1.0 or higher for L4150/60/70 series
• Sometimes labeled: L4150_L4160_L4170_AdjProg_1.1.0.exe or similar

Prerequisites:

1. Windows PC only (These programs rarely work on Mac or Linux).
2. A USB cable (do not rely on Wi-Fi for resetting – it is unstable).
3. Admin access to your PC (turn off Windows Defender temporarily; it flags these programs as false positives).
4. Replace your Maintenance Box (T04D1 / T9212 / T9213). If you reset the counter without replacing the physical pad, ink will leak inside your printer.