Epson Adjustment Program Ver.1.0.6 352 -

Understanding the Epson Adjustment Program Ver.1.0.6 (352) The Epson Adjustment Program Ver.1.0.6 352 (often called an Epson Resetter) is a specialized utility used to maintain and reset internal settings for specific Epson inkjet printer models. This software is primarily used by technicians and DIY users to resolve common hardware-locked errors, most notably the "Service Required" message caused by a full waste ink pad counter. Key Functions of the Utility

The software provides several "Particular Adjustment" modes designed to extend the life of your hardware:

Waste Ink Pad Counter Reset: Resets the internal counter to 0%, allowing the printer to resume operation after a "Service Required" error.

EEPROM Initialization: Restores the printer's internal memory to factory defaults.

Print Head Cleaning: Executes a deep cleaning cycle more intensive than the standard driver options. Epson Adjustment Program Ver.1.0.6 352

Adjustment Settings: Fine-tunes the print head alignment and voltage for improved print quality. How to Use the Adjustment Program

Follow these steps to reset your printer's internal counters:

Preparation: Ensure your printer is connected to your computer via a USB cable; Ethernet or Wi-Fi connections often fail during adjustment procedures.

Selection: Launch the program and click the "Select" button. Choose your specific printer model and the corresponding USB port. Mode Entry: Click on "Particular Adjustment Mode". Counter Reset: Select "Waste ink pad counter" from the list and click OK. Understanding the Epson Adjustment Program Ver

Check the boxes for "Main pad counter" or "Platen pad counter."

Click "Check" to see the current usage, then click "Initialize" to reset the values to zero.

Finalization: A prompt will appear asking you to turn off your printer. Power it down, wait a few seconds, and turn it back on to complete the reset. Important Safety and Hardware Tips

While resetting the software counter allows the printer to work again, the physical waste ink pads are still saturated with ink. To prevent leakage and damage to your workspace: Step 2 – Prepare your printer

Replace the Pads: Physically replace the cotton pads inside the printer or install an external waste ink tank.

Software Origin: Only download this utility from reputable sources like BCH Technologies or official Epson Support pages, as unauthorized versions may contain malware.

WIC Reset Alternative: If you cannot find the specific 1.0.6 version, tools like the WIC Reset Utility offer a similar service using a one-time reset key.

Step 2 – Prepare your printer

• Turn off the printer.
• Disconnect USB from PC.
• Open the scanner unit (if applicable).
• Physically clean or replace the waste ink pads (or install an external waste ink tank).

Step 1: Select Your Printer Model

• In the main dropdown menu, select Epson L352 Series.
• Ensure the “Port” automatically shows your USB-connected printer. If not, click “Check” or “Select Port.”

Warnings & best practices

• Use only with the exact model the tool supports; wrong model selection can brick the printer.
• Back up EEPROM/settings if the tool allows, before writing changes.
• Physical wear: resetting waste ink counters without replacing or servicing pads can cause overflow and ink leakage—inspect and replace pads if necessary.
• Download software from reputable sources and scan for malware.
• Many manufacturers consider some uses of adjustment tools as out-of-warranty or non-supported — proceed at your own risk.