Easycap-sm-usb-007-windows-10-x64-drivers //free\\ May 2026

Finding and installing the correct drivers for the EasyCap SM-USB-007

on Windows 10 x64 can be notoriously difficult because these devices are often unbranded "clones" with varying internal chipsets.

Below is a guide on how to identify, download, and install the necessary drivers to get your video capture card working. 1. Identify Your Hardware ID

Before downloading drivers, you must verify that your device uses the SM-USB-007 (SMI Grabber) chipset. Plug the EasyCap into a USB port. Open Device Manager (Right-click Start > Device Manager).

Look for an "Unknown Device" or "SM-USB 007" under Other devices. Right-click the device > Properties > Details tab. Select Hardware Ids from the dropdown.

Confirm it matches common SMI IDs such as USB\VID_1C88&PID_0007. 2. Download the Drivers

Since official manufacturer support for these devices is often non-existent, community-maintained repositories are the most reliable source for Windows 10 x64 signed drivers.

GitHub Repository: Use the samuelcarreira EasyCap SM-USB-007 repository which contains the specific .inf files for 64-bit systems.

Alternative: Some users find success using legacy Windows 7 64-bit drivers, which can be manually forced through Device Manager. 3. Installation Steps

Warning: Always create a System Restore Point before installing unverified drivers.

Extract the Files: Download the driver ZIP and unzip it to a folder on your desktop. Manual Install:

Right-click the SmiUsbGrabber3C.inf file and select Install.

Alternatively, go back to Device Manager, right-click the unknown device, and select Update driver.

Choose Browse my computer for drivers and point it to the folder you unzipped.

Verification: Once installed, the device should move from "Other devices" to Sound, video and game controllers and appear as SMI Grabber Device or OEM Capture. 4. Common Troubleshooting

Driver Signature Enforcement: If Windows blocks the install, you may need to restart Windows in "Disable Driver Signature Enforcement" mode.

Black Screen in Software: If you get audio but no video in software like OBS Studio, ensure the video standard is set correctly (e.g., NTSC or PAL) in the device properties.

Privacy Settings: Ensure "Camera" access is enabled in Windows Settings > Privacy > Camera, otherwise, apps cannot see the EasyCap stream.

To install the EasyCap SM-USB-007 drivers on Windows 10 x64, you must manually force the driver installation through the Device Manager. Because these devices are older, Windows 10 will not fetch the drivers automatically. 📌 1. Verify Your Hardware ID

Before proceeding, you must ensure your EasyCap device uses the specific SM-USB 007 chipset. Plug your EasyCap device into a USB port. Right-click the Start Menu and select Device Manager.

Look for an unknown device with a yellow exclamation mark (often named SM-USB 007 or SMI Grabber). Right-click the device and select Properties.

Go to the Details tab and change the property dropdown to Hardware Ids.

Verify that it contains the text USB\VID_1C88&PID_0007 (or similar SMI vendor codes). 📥 2. Download the Driver Files

Because official manufacturer support for these devices has ended, you will need to rely on community-preserved repositories.

Visit the samuelcarreira GitHub Repository which hosts archived x64 drivers specifically tailored for this hardware. Click the green Code button and select Download ZIP.

Extract the contents of the ZIP file to a folder on your desktop that you can easily find. ⚙️ 3. Install the Driver Manually

Windows will block standard automated installers for this device, so you must guide the OS directly to the driver files. easycap-sm-usb-007-windows-10-x64-drivers

Go back to Device Manager and right-click your unknown EasyCap device. Click Update driver. Choose Browse my computer for drivers.

Click the Browse button and navigate to the folder where you extracted the downloaded ZIP file.

Ensure the box for Include subfolders is checked and click Next.

Windows should identify the driver and complete the installation.

Your device will now appear under the Sound, video and game controllers section as SMI Grabber Device or OEM Capture.

Alternative Method: You can also locate the SmiUsbGrabber3C.inf file inside the downloaded folder, right-click it, and select Install. 🛠️ 4. Overcoming Potential Errors

If the driver fails to install or gives an "unsigned driver" error:

Disable Driver Signature Enforcement: Windows 10 blocks unsigned drivers by default. Go to Settings > Update & Security > Recovery > Advanced startup > Restart now. Upon reboot, select Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 or F7 to disable driver signature enforcement, and try the installation again.

Create a Restore Point: Always create a Windows System Restore Point before pushing forced legacy drivers to your system. samuelcarreira/EasyCap-SM-USB-007-Windows-10-x64-drivers

If you've plugged in your analog capture card and Windows 10 isn't recognizing it, you likely need a specific SMI Grabber driver to bridge the gap. 1. Verify Your Hardware

Before installing, ensure your device matches the internal ID that this driver supports: Open Device Manager (right-click the Start button). Find the unknown device (usually listed as "SM-USB 007"). Right-click it > Properties > Details tab.

Change the dropdown to Hardware IDs. It should include USB\VID_1C88&PID_0007. 2. Installation Steps

Create a Restore Point: Since these are unofficial drivers, always create a System Restore Point before proceeding.

Download the Files: Access the EasyCap SM USB 007 Windows 10 Drivers on GitHub. Download and unzip the repository.

Install the INF: Locate the file named SmiUsbGrabber3C.inf. Right-click it and select Install.

Confirm Success: Check your Device Manager again. Under "Sound, video and game controllers," you should now see SMI Grabber Device listed without any yellow warning icons. 3. Pro Tips for Better Video

Use OBS Studio: For capturing the actual footage, OBS Studio is often more stable than the software bundled with the device.

Deinterlacing: Analog video often looks "jagged" on modern monitors. In your capture software, enable "Deinterlacing" (usually under Video Properties) to smooth out the motion.

Are you planning to use this for digitizing old VHS tapes, or are you connecting a different type of analog device?

EasyCap USB TV 007(usbtv007) - Driver installation for Windows 10

To install the EasyCap SM-USB-007 drivers on Windows 10 x64, you typically need to manually point Windows to the driver files, as these devices often don't have automatic installers. Installation Guide Prepare the Drivers : Download the driver package (often found on unzip/extract the files to a folder on your desktop. Open Device Manager : Right-click the button and select Device Manager Locate the Device : Look for an "Unknown Device" or "SM-USB 007" under Other devices Sound, video and game controllers Update Driver Right-click the device and select Update driver Browse my computer for drivers Let me pick from a list of available drivers on my computer , then click

The requested "paper" likely refers to the technical documentation or a setup guide EasyCap SM-USB-007 video capture adapter, specifically for Windows 10 x64

. These devices are notorious for driver compatibility issues because many use different internal chipsets (like Somagic, UTV007, or AMT600) despite sharing the same exterior casing. Driver Setup & Technical Overview

For Windows 10 64-bit systems, the "paperwork" or technical process generally follows these steps to ensure the device is recognized as a "USB 2.0 Video Capture" or "OEM Device": Chipset Identification : The "007" in your query usually refers to the

chipset. This is the most stable version for Windows 10 as it often works with "Plug and Play" or requires a specific SMI Grabber driver. Driver Signature Enforcement

: Because many EasyCap drivers are older or "unsigned," Windows 10 may block installation. A common technical requirement is to disable Driver Signature Enforcement via the Advanced Startup menu before running the or updating via Device Manager. Device Manager Verification : Once installed, the device should appear under Sound, video and game controllers Finding and installing the correct drivers for the

. If it appears as "Unknown Device," the driver INF file must be manually pointed to via the "Update Driver" -> "Browse my computer" path. Common Software Compatibility

Technical papers and manuals for this hardware recommend the following software for 64-bit environments: Honestech TV DVR : Often bundled with the physical disc. OBS Studio

: Highly recommended for Windows 10 users as it has better 64-bit hook support for generic USB capture cards.

: Useful for troubleshooting as it has robust internal codecs that can often bypass minor driver communication errors. Troubleshooting Checklist

If the device is connected but showing a "Black Screen" or "No Signal": Privacy Settings : Ensure "Allow apps to access your camera" is turned in Windows 10 Privacy settings. USB 2.0 port

directly on the motherboard (back of the PC) rather than a hub or a USB 3.0 (blue) port, which can cause timing issues with the SM-USB-007. PAL/NTSC Switch

: Ensure the software capture format matches your input source (e.g., PAL for UK/Europe, NTSC for USA). in PDF format, or are you having a specific error while trying to install the driver?

The Solution: The "UsbDk" & "OEM" Workaround

Do not download "Driver Easy" or random EXE files from pop-up ads. They are malware. Here is the clean, open-source solution.

Step 1: Download the correct software You need two things:

1. UsbDk (USB Driver Kit) – This acts as a bridge.
2. OEM EasyCAP Drivers (Modified for Win10 x64).

You can find these on GitHub or reputable open-source repositories (search for "EasyCAP Linux drivers" or "MS210x Windows drivers" – the open-source community has ported these safely).

Step 2: Disable Driver Signature Enforcement (Temporarily) This is mandatory for the first install.

1. Hold Shift and click Restart.
2. Go to Troubleshoot > Advanced Options > Startup Settings.
3. Click Restart.
4. Press 7 or F7 to select Disable driver signature enforcement.

Step 3: Installation

1. Plug in your EasyCAP. Windows will say "Driver error" – ignore this.
2. Run the install.bat file from the open-source driver pack (as Administrator).
3. Alternatively, go to Device Manager > Unknown Device > Update Driver > Browse my computer > Let me pick > Have Disk > Navigate to your extracted driver folder.

Step 4: The App you actually need Even with drivers, Windows Camera app usually won't see the EasyCAP. You need specific software:

• OBS Studio (Recommended): Add a new "Video Capture Device." If the driver is installed correctly, "USB Video Device" will appear.
• VLC Player: Go to Media > Open Capture Device > DirectShow > Select your device.

Part 6: Common Windows 10 x64 Issues & Fixes

| Issue | Likely cause | Fix | |--------|----------------|-------| | Driver installs but no video (green screen) | Wrong resolution or chip mismatch | Force 720x480 or 640x480 in OBS. Try both composite and S-Video ports. | | Audio drifts out of sync after 5 minutes | MS210x clock drift (known hardware flaw) | Use OBS filters: Video delay async +100ms. Or capture audio separately. | | Crash when changing resolution | Bad X

Getting the EasyCap SM-USB 007 video capture card to work on Windows 10 x64 typically requires a manual driver installation, as the original software discs are often outdated or missing . Most devices with this hardware ID are recognized as an "SMI Grabber Device" after proper installation . 1. Identify Your Hardware ID

Before downloading drivers, confirm your device matches the SM-USB 007 chipset: Open Device Manager (Right-click Start > Device Manager).

Find the "Unknown Device" (often listed as SM-USB 007 or SMI Grabber Dev) . Right-click it > Properties > Details tab. Select Hardware Ids from the dropdown. It should look like: USB\VID_1C88&PID_003C USB\VID_1C88&PID_0007 2. Recommended Driver Sources

GitHub Repository: A popular community-maintained source for Windows 10 x64 Drivers .

DriverScape: Provides signed drivers specifically for the SM-USB 007 on Windows 10 . 3. Installation Steps

EasyCap SM-USB-007 is a popular, budget-friendly USB 2.0 video capture adapter used to digitize analog video from sources like VCRs, camcorders, and CCTV cameras. Getting it to work on Windows 10 x64

is notoriously difficult because many of these devices are "clones" using different internal chipsets, often lacking official signed drivers for modern 64-bit operating systems 1. Identifying the Chipset (Crucial Step)

Before downloading any driver, you must identify the hardware ID. Many "SM-USB-007" units use the chipset, but others use Plug the device into your USB port. Right-click the Start button and select Device Manager Find the "EasyCap" or "Unknown Device" (often under Sound, video and game controllers Right-click it > Properties Change the dropdown to Hardware Ids . Look for a string like USB\VID_1C88&PID_0007 (this specific ID confirms the 2. Driver Installation for Windows 10 x64 Since Windows 10 requires Digitally Signed Drivers , standard old drivers often fail. The SMI2021 Driver: Most SM-USB-007 devices require the SMI Grabber Device driver. Look for version or higher, which is generally compatible with x64 systems. Disabling Driver Signature Enforcement:

If the driver refuses to install, you may need to temporarily disable Windows signature enforcement: while clicking

Troubleshoot > Advanced options > Startup Settings > Restart to "Disable driver signature enforcement." Install the driver manually via Device Manager. 3. Recommended Software for Capture

Once the driver is recognized (the device should no longer have a yellow exclamation mark), the included "Honestech TV DVR" software is often buggy on Windows 10. Use these modern alternatives instead: OBS Studio (Highly Recommended):

Free and open-source. Add a "Video Capture Device" source and select "SMI Device." PotPlayer: The Solution: The "UsbDk" & "OEM" Workaround Do

A lightweight media player that has excellent "Open Device" capabilities for analog capture.

A simple, classic utility often used to test if the hardware is receiving a signal. 4. Common Troubleshooting

Windows 10 Privacy settings often block apps from accessing the "Microphone" (which is how the EasyCap audio is categorized). Go to Settings > Privacy > Microphone and ensure "Allow apps to access your microphone" is Black and White Video:

This usually means the "Video Standard" is set incorrectly. In your capture software's properties, switch between (Europe/Asia) and (USA/Japan). USB 3.0 Incompatibility:

These older chipsets often struggle with USB 3.0 (blue) ports. Try plugging the device into a USB 2.0 (black) port for better stability. direct download links

for the SMI2021 x64 driver or help identifying your specific Hardware ID

Getting the EasyCap SM-USB 007 (often recognized as the SMI Grabber Device ) to work on Windows 10 x64

can be tricky because the hardware is older and official support is limited. Here is a comprehensive guide to installing the drivers and getting your video capture running. 1. Identify Your Hardware

Before installing anything, verify that your device has the correct Hardware ID Device Manager by right-clicking the Start button. Look for an unknown device labeled SM-USB 007 Right-click it, select Properties , go to the tab, and select Hardware Ids from the dropdown. Check if it is recognized as USB\VID_1B71&PID_3002 or similar common IDs for this SMI chipset. 2. Recommended Driver Installation

The most reliable drivers for Windows 10 x64 are often the legacy Windows 7 64-bit drivers. Manual Install Method

Download a trusted driver package, such as the one found on the Samuel Carreira GitHub repository Driver Scape Extract the ZIP file to a folder. Device Manager , right-click SM-USB 007 and select Update Driver Browse my computer for drivers and navigate to the extracted folder (select the Alternatively, you can right-click the file (e.g., SmiUsbGrabber3C.inf ) and select : Once installed, the device should appear under Sound, video and game controllers SMI Grabber Device 3. Compatible Software

The software originally bundled with EasyCap (like Ulead VideoStudio 10) often fails to work on modern Windows versions. Instead, use these modern alternatives: OBS Studio : Highly recommended. Add a Video Capture Device source and select "SMI Grabber Device". VirtualDub

: A lightweight tool excellent for direct capture and troubleshooting. VLC Media Player Open Capture Device and select the grabber. 4. Troubleshooting Common Issues No Video/Black Screen

: Ensure you have selected the correct input (Composite or S-Video) within your capture software. Code 28 Error

: This indicates the driver is missing or incompatible. Repeat the manual installation steps above using administrator rights. Interference/Grainy Image

: Connect the device directly to a rear USB port on your PC rather than a front port or hub to ensure stable power and reduce electromagnetic interference. Privacy Settings

: Make sure Windows 10 "Camera" privacy settings are toggled to allow apps to access your capture device. For more specific help, you can check the discussion on Microsoft Q&A or user-tested guides on 8bitmammoth Are you planning to capture or use the device for gaming consoles

Title: The Ultimate Fix: Finding and Installing EasyCAP SM-USB-007 Drivers on Windows 10 x64 Date: October 26, 2023 Category: Tech Help / Legacy Hardware

If you are reading this, you have likely just unboxed an EasyCAP SM-USB-007 (the classic blue or yellow dongle) only to be greeted by the dreaded "Device not recognized" chime on your Windows 10 64-bit PC.

Let me save you hours of frustration: The CD that came in the box is useless. Those drivers were designed for Windows XP and Vista. If you try to install them on Windows 10, you will either get a Blue Screen of Death (BSOD) or the driver signature error.

Here is the definitive guide to getting that cheap USB capture stick working on modern hardware.

6. Method 3: Using SView or Honestech Software Drivers

Many EasyCAP SM USB 007 units ship with a mini-CD containing software like Honestech VHS to DVD or SView 5.0. These packages include a functional, albeit unsigned, Windows 10 x64 driver.

Installation process:

1. Do not plug in the device yet.
2. Run Setup.exe from the original CD. Install the included application.
3. When prompted to install "Driver for Capture Device," agree.
4. After installation completes, plug in the EasyCAP.
5. Windows will automatically use the driver from C:\Program Files (x86)\Honestech\Driver

Note: These drivers are usually 32-bit drivers masquerading as 64-bit. They work but may cause memory crashes in applications like OBS Studio. Use them only with the bundled capture software.

Comparison to Alternatives

• Vs. Elgato Video Capture: The Elgato costs ~$80 but works instantly on Windows 10, has a built-in hardware DSP to stabilize the signal, and includes excellent software. The EasyCap is 1/4 the price but requires 10x the effort.
• Vs. Generic "Video Grabbers": The EasyCap is essentially the bottom tier of video grabbers. If you can afford a slightly better generic "ClearClick" or "Diamond" capture card, you will save yourself hours of driver troubleshooting.

5. Method 2: Disabling Driver Signature Enforcement (Test Mode)

If you cannot find signed drivers, your most reliable path is to temporarily disable driver enforcement.

Step 1: Identify Your Specific Chipset

Before downloading anything, you must verify that your device is actually the SM-USB-007 variant. Windows 10 often misidentifies these devices.

1. Plug the EasyCap device into your PC.
2. Right-click the Start button and select Device Manager.
3. Look for the device. It may be listed under "Other devices," "Sound, video and game controllers," or "Imaging devices."
4. Right-click the device entry (it might be named something generic like "SM-USB 007" or "USB 2861 Device") and select Properties.
5. Go to the Details tab.
6. Under the "Property" dropdown, select Hardware IDs.

The Critical Code: If you see a value similar to:

• USB\VID_1C88&PID_0007
• USB\VID_1C88&PID_003C

...then this guide is for you. This confirms you have the Somagic (SMI) chipset.