Driver Easycap Windows 11 — Upd ((full))

Getting an EasyCap device to work on Windows 11 can be tricky because "EasyCap" is a generic brand name for several different internal chipsets, most of which haven't seen official driver updates in years 1. Identify Your Chipset

Before downloading drivers, you must know which chipset your device uses. Windows 11 will often list it as an "Unknown Device" or a generic name in Device Manager Often labeled as "usbtv007". SMI Grabber (SM-USB-007):

Recognized as "SMI Grabber Device" after driver installation. STK1160 / STK1150: Older models typically used for DC60 versions. Based on the Empia chip. 2. Manual Driver Installation Steps driver easycap windows 11 upd

Most EasyCap drivers for Windows 11 are actually modified or legacy Windows 7/10 drivers that must be installed manually. Easycap not working on windows 10 - Super User

EasyCAP devices (typically USB 2.0 video capture cards with composite/S-Video inputs) are notorious for driver issues on modern Windows versions. This guide covers everything from driver selection to advanced fixes. Getting an EasyCap device to work on Windows

Step 4: Manual Installation of the Driver

Now that your PC is in test mode (or signature enforcement disabled):

Extract the downloaded driver easycap windows 11 upd ZIP file to a folder (e.g., C:\EasyCAP_Driver).
Open Device Manager.
Right-click your problematic “Unknown device” > Update driver > Browse my computer for drivers.
Click Let me pick from a list of available drivers on my computer.
Click Have Disk > Browse.
Navigate to the extracted folder and select the .inf file (e.g., stk1160.inf or EasyCap.inf).
Click OK > Next.
A warning about “Windows cannot verify the publisher” will appear. Click Install this driver software anyway.

After a few seconds, Device Manager should refresh, and you’ll see “EasyCAP Video Capture” or “STK1160 Video Device” under “Sound, video and game controllers”. Step 4: Manual Installation of the Driver Now

Method 1: Using the Device Manager

Press the Windows key + X and select Device Manager.
In the Device Manager, expand the "Imaging devices" or "Sound, video and game controllers" section.
Right-click on the EasyCap device and select "Update driver".
Click "Search automatically for drivers" and follow the prompts.

Common Errors and Fixes

| Error Message | Solution | |---------------|----------| | “The hash for the file is not present” | You must disable driver signature enforcement (Step 3). Reboot and try again. | | Device still shows as “Unknown” after install | Right-click the device in Device Manager > Uninstall device > Check “Delete driver software”. Then reboot and repeat Step 4. | | Audio not working (EasyCAP has red/white RCA) | Audio is usually on a separate USB audio device. Look for “USB Audio Device” in Sound settings. Set as default if needed. | | Blue screen (BSOD) on plugging EasyCAP | You installed the wrong chipset driver. Boot into Safe Mode, uninstall the driver, and use Hardware IDs to find the correct one. | | No video in OBS but green/black screen | Change the “Video Format” in OBS properties: Try MJPEG, YUY2, or I420. Also check your source is outputting composite video (not S-Video). |

Solution B: The "Generic" Driver Fix (Most Reliable)

If Windows 11 didn't find a driver, the best solution is to use a community-sourced driver package that forces Windows to recognize the hardware. The most trusted source currently is the Somagic or Syntek community patches.

Solution A: The "Best Case" Scenario (Automatic Install)

If you have a newer revision of the hardware, Windows 11 might actually handle this for you.

Plug the EasyCAP device into a USB 2.0 port (avoid USB 3.0/3.1 ports if possible, as legacy hardware can struggle with handshaking on newer ports).
Open Settings > Windows Update.
Check for updates. If Windows recognizes the chipset, it will silently install a generic driver.
Open "Camera" or "OBS Studio" to see if the video feed appears.