Dhi-nvr1108hs-8p-s3 H Firmware

The official "paper" for the Dahua DHI-NVR1108HS-8P-S3/H Go to product viewer dialog for this item.

(datasheet) confirms it is an 8-channel PoE Network Video Recorder designed as a cost-effective, entry-level solution for IP video surveillance. Key Technical Specifications

The following details are sourced from the official Dahua India Datasheet:

Operating System: Embedded Linux with the New 4.0 User Interface.

Bandwidth: 80 Mbps for access/storage and 60 Mbps for forwarding. dhi-nvr1108hs-8p-s3 h firmware

Resolution: Supports 8MP, 5MP, 4MP, 1080p, and lower resolutions.

Decoding Capability: 1-ch @ 8MP (30 fps) or up to 4-ch @ 1080p (30 fps). Storage: 1 SATA 2.0 port supporting a single HDD up to 8TB.

PoE Ports: 8 RJ-45 ports with a total PoE budget of 72W (max 25.5W per single port).

Video Output: Simultaneous VGA and HDMI output with a maximum resolution of 1080p. Firmware Information The official "paper" for the Dahua DHI-NVR1108HS-8P-S3/H Go

Firmware updates for this model typically address security baselines and performance improvements. DHI-NVR1108HS-S3/H - Dahua India

Q3: My NVR is a rebranded model (e.g., Lorex). Can I use Dahua firmware?

Usually not. Rebranded devices have modified hardware IDs. Flashing generic firmware will likely fail or brick the unit. Use the rebrander’s official firmware.

Method 2: USB Local Update (if network is down)

  1. Copy firmware .bin to a FAT32 USB drive.
  2. Plug USB into NVR’s USB port.
  3. From NVR local GUI: Main MenuMaintenanceUpgrade → Select USB file.

Q5: My firmware update failed at 90% – what do I do?

Do not power off. Wait 30 minutes. If still stuck, power cycle. If the NVR is unresponsive, contact Dahua support for recovery instructions. You may need to boot from a recovery USB.


Method 1: Web Browser (Recommended)

  1. Log in to the NVR’s web interface (HTTP port 80 – e.g., http://192.168.1.108).
  2. Go to MaintenanceUpgrade.
  3. Browse to the .bin firmware file.
  4. Click Upgrade – the device will reboot automatically (takes ~5 minutes).

Q1: Can I update using a network share (NFS/SMB)?

No. The DHI-NVR1108HS-8P-S3/H only supports USB or local web upload for firmware updates. Copy firmware

Best Practices for Maintaining Your NVR Firmware


Firmware Changelog: What’s New in Recent Versions

While Dahua does not always publish detailed changelogs, based on community feedback and release notes, here are typical improvements for this model:

| Build Date | Version Example | Key Changes | |-----------------|--------------------------|-----------------------------------------------------------------------------| | 2023-08-15 | V4.002.0000000.0.R | HTML5 web interface default; fixed ONVIF Profile S/T compliance. | | 2023-02-10 | V4.001.0000000.2.R | Improved motion detection sensitivity; resolved PoE port 5 dropout issue. | | 2022-09-01 | V4.000.0000000.5.R | Added support for H.265+; fixed NTP time drift. | | 2022-03-12 | V3.216.0000000.3.R | Critical security patch for CVE-2021-33045. | | 2021-11-20 | V3.215.0000000.0.R | Initial S3/H hardware support. |

Always read the release notes included in the download ZIP.


Overview

The Dahua DHI-NVR1108HS-8P-S3/H is an 8-channel, 1-HDD slot, 8-PoE port network video recorder. It is part of Dahua’s Lite Series, designed for small to medium surveillance systems.

"S3" indicates the hardware version (V3.0). "/H" typically denotes a hybrid or specific regional variant (e.g., H.265+ support or hardware revision). Using the wrong firmware can brick the device.