Control Universal Articco Th-msur-40 Manual May 2026

The Articco TH-MSUR-40 is a versatile universal remote control that can integrate more than 4,000 models, including air conditioners, TVs, DVDs, and audio systems. It features a large backlit LCD screen, clock display, and a memory function that saves your settings even during battery changes. Programming Your Remote

You can set up the TH-MSUR-40 using two primary methods. Before starting, ensure you have installed two AAA batteries. Automatic Code Search (Easiest Method)

Turn on the device you want to control (e.g., your air conditioner). Point the remote at the device's receiver.

Press and hold the SET button for about 6 seconds until the code digits on the LCD start flashing.

The remote will begin cycling through codes. Release the SET button immediately when the device responds (e.g., it beeps or turns off). Press OK to lock in and save the code. Manual Code Input

Identify the correct 4-digit code for your brand from the official manual or code list. Press and hold the SET button until the screen flashes. Select the device type (AC, TV, etc.).

Enter the 4-digit code using the number buttons; the screen will show "OK" if the code is valid. Press OK to confirm. Key Features & Functions

Intelligent Cool/Heat: A convenient one-touch feature for quick climate adjustment.

Child Lock: To lock, press and hold SET and M. SWING simultaneously until the lock icon appears. Repeat to unlock.

Clock Setting: Press and hold SET and MODE until the hours flash. Use the temperature arrows to adjust, then press SET again to adjust minutes.

Restore Factory Settings: Press and hold SET and FAN together for about 3 seconds. Troubleshooting

If the remote does not respond, try the "Camera Test": point the remote's LED at a digital camera or smartphone (non-iPhone) and press any button. If you see the LED light up through the camera screen, the remote is sending a signal. Manual de Control Universal Arttico | PDF | Relay - Scribd

To program your Articco TH-MSUR-40 universal remote, use either the automatic search or manual code entry methods. This remote supports over 4,000 models of air conditioners, TVs, and DVDs. 🛠️ Programming Instructions Method 1: Automatic Search (Easiest) Best if you do not know the specific code for your device. Turn on your device manually (e.g., your A/C unit). Point the remote directly at the device. Press and hold the SET button for about 6 seconds.

The code numbers on the LCD screen will begin to cycle rapidly.

Watch the device: As soon as it beeps or turns off, immediately press OK (or any key) to lock in that code.

Test the other buttons. If they don't work, repeat the process. Method 2: Manual Code Entry Best for a faster setup if you have the code list. control universal articco th-msur-40 manual

Find the brand code for your device (e.g., Samsung, LG, Carrier). Press and hold SET until the LCD screen flashes. Select the device mode (AC, TV, or DVD). Enter the 4-digit code using the number pad. The screen should show "OK" if successful. Press OK to save and exit. 📋 Key Functions & Features

Intelligent Cooling/Heating: Includes iCool and iHeat buttons for one-touch optimal temperature settings.

Timer: Set specific Time ON or Time OFF schedules for your air conditioner.

Backlight: Press the LIGHT button to illuminate the screen for 10 seconds.

Clock: The current time is displayed in the bottom corner of the LCD screen.

💡 Pro Tip: If the remote stops responding after a battery change, use the Memory Function. It usually retains settings, but if not, you can often find the last successful code printed inside the battery compartment if you wrote it down. If you'd like, I can help you:

Find the specific 4-digit code for your brand (e.g., Samsung, Midea, York) Set up the Auto-Timer for daily use

Troubleshoot if the "Search" function keeps skipping your device

Which brand of air conditioner or TV are you trying to pair? Manual Controle Universal Articco Th Msur 40 - Facebook

Master Your Entertainment: The Ultimate Guide to the Articco TH-MSUR-40

Nothing kills a movie night faster than a coffee table cluttered with five different remotes—especially when you can’t find the one that actually works. If you’ve just picked up the Articco TH-MSUR-40 universal remote , you’re one step away from reclaiming your living room.

Here is your quick-start guide to setting up your new control center without the headache. 1. The Quick Fix: Auto-Code Search

Most modern universal remotes, including the Articco series, feature an "Auto-Search" function. This is the "set it and forget it" method for when you don't want to hunt through a manual for specific brand codes. Turn on your device: Make sure your TV or soundbar is physically powered on. The Magic Buttons: Press and hold the (or Setup) button until the indicator light stays on. Target Practice: Point the remote at your device and press the

button repeatedly (or once, depending on the model) to cycle through codes. Lock it in: Once your device turns off, immediately press to save the code. 2. Precision Setup: Manual Code Entry

If auto-search isn't working, manual entry is your best friend. This is common for older or niche brands. Find your code: The Articco TH-MSUR-40 is a versatile universal remote

Look for the 3 or 4-digit code specific to your brand (e.g., Samsung, LG, Sony) usually found on a code sheet inside the battery compartment or the original packaging. Enter Setup: until the light glows. Type the Code:

Use the number pad to enter your brand's code. The light should blink or turn off to confirm success. 3. Troubleshooting Common Issues Weak Signal:

If the remote only works when you're inches away, check the batteries. Universal remotes often lose their programming if the batteries sit dead for too long. Partial Functionality:

Sometimes the volume works but the input button doesn't. This usually means you’re on a "close" code but not the one. Try the next code in the sequence for your brand. Why We Love the Articco Series

The TH-MSUR-40 is designed for simplicity. Unlike some high-end remotes that require a computer to program, this model relies on internal libraries, making it a "manual-first" device that anyone can set up in under five minutes. Ready to simplify your setup?

If you've lost your paper manual, a great tip is to snap a photo of the code list and save it to your phone's "Favorites" album—you'll thank yourself next time you have to swap batteries! Is your device still not responding? Tell us the brand and model of your TV below so we can help you find the exact code! UNIVERSAL REMOTE CODES – Jasco

The Articco TH-MSUR-40 is a 4-in-1 universal remote capable of controlling Air Conditioners (AC), TVs, DVDs, and Audio systems.  Setup & Programming Methods 

There are two primary ways to pair the remote with your device:  1. Manual Code Entry 

Use this method if you have the specific 4-digit code for your brand (e.g., Samsung: 0188-0196, Sanyo: 0046-0095).  Power on the device manually (e.g., turn on your TV or AC). Press and hold the SET button until the LCD screen flashes. Press the corresponding Mode button (AC, TV, DVD, or AUD). Hold the OK button until "INPUT" appears on the screen. Enter the 4-digit code using the number pad.

If the code is valid, the screen shows "OK"; if not, it shows "ERROR"—try another code from the list. Press OK to save and exit.  2. Automatic Code Search  Use this if you do not know your device's code.  Turn on the target device. Hold the SET button until the screen flashes. Press the Mode button (e.g., AC).

Hold the OK button until "SEARCH" appears. The remote will cycle through codes automatically.

Watch the device: As soon as it responds (e.g., it beeps or turns off), immediately press OK to freeze and save the code.  Key Features 

Multi-Device Support: Controls up to 4 different electronic categories.

Auto-Off Timer: Allows you to schedule an AC to turn off automatically within 1 to 15 hours.

Memory Backup: Programmed codes are typically retained even when batteries are replaced.  Common 4-Digit AC Codes  Brand  Code Range Samsung 0188–0196, 0503, 0700–0707 Panasonic 0138–0154, 0483, 0658–0666 Toshiba 0107–0117, 0493–0499, 0619–0630 Sharp 0096–0106, 0525, 0608–0609 York 0107, 0238, 0573, 0750–0756 Manual Controle Universal Articco Th Msur 40 - Facebook Issue 3: Some buttons work, but others do the wrong thing

Articco TH-MSUR-40 is a universal remote control designed primarily for air conditioning units and other home devices. To program it, you can use either the automatic search method or manual code entry. Programming Methods Automatic Code Search:

Use this if you do not have the specific code for your device.

Manually turn on the device (e.g., air conditioner) you want to control. Activate Search: Point the remote at the device. Press and hold the

button for about 10 seconds until the code numbers on the screen begin to flash and increase. Monitor Response:

The remote will cycle through frequencies. When the device responds (it may beep or turn off), immediately press any key to stop the scan.

Once the search stops, the screen will show a four-digit code. Press to save it. Manual Code Entry: Use this if you have the brand-specific code list Enter Setup: Press and hold the button until the screen flashes. Select Mode: Choose the device type (AC, TV, DVD) if applicable. Input Code:

buttons or the number pad to navigate to your specific brand's code. to register the code. Key Features Timer Function:

Includes a "time off" function to automatically turn off your AC after 1 to 15 hours to save energy. Broad Compatibility: Supports up to 4,000 different brands. Auto-Detection:

Some universal control boards may recognize the remote immediately upon inserting batteries without needing programming.

For a full list of codes or more detailed technical specs, you can refer to the Articco Universal Control Manual on Scribd for your device's brand? Manual Controle Universal Articco Th Msur 40 - Facebook

Here is the content for a Control Universal Articco TH-MSUR-40 Manual. This is a technical writing creation based on standard industry practices for universal temperature/humidity controllers, as specific proprietary manuals are not stored in my training data.

Issue 3: Some buttons work, but others do the wrong thing

• Cause: You programmed a "partial" code (common in auto-search).
• Fix: This is called "code overlap." You must re-run the auto-search process. Instead of stopping the first time the Power button works, wait 5 more seconds. Let it find the second or third code for a complete button mapping.

Basic configuration (common steps)

1. Power on the unit.
2. Enter configuration mode (often by holding a combination of buttons such as SET + up/down for 3 seconds).
3. Set sensor type and input range (if configurable).
4. Set temperature setpoint (SP) and humidity setpoint if applicable.
5. Configure control mode: heating or cooling (select which output activates when process variable is above/below setpoint).
6. Set differential/hysteresis (deadband) to prevent rapid cycling; typical values: 0.5–2°C or 2–5% RH.
7. Configure minimum on/off times (compressor protection) if available.
8. Set alarm thresholds and actions (e.g., relay activation, audible alarm).
9. Save and exit configuration.

Parameter Table (Factory Defaults)

| Code | Parameter | Range | Default | | :--- | :--- | :--- | :--- | | SP | Temperature Setpoint | -50 to +150°C | 22.0°C | | HY | Hysteresis (Differential) | 0.1 – 10.0°C | 1.0°C | | C/F | Unit | C / F | C | | AH | High Temp Alarm | SP to +150°C | 35.0°C | | AL | Low Temp Alarm | -50 to SP °C | 5.0°C | | SP_H | Humidity Setpoint | 10 – 95% RH | 60% RH | | HY_H | Humidity Hysteresis | 1 – 20% RH | 5% RH | | MODE | Control action | H/C (Heating/Cooling) | C (Cooling) | | SEn | Sensor type | Pt / ntc / 420 | Pt (PT100) |

Finding the Manual

1. Manufacturer's Website: The first place to look is the official website of Control Universal or Articco. Companies often provide downloadable manuals for their products in PDF format.

2. Online Manual Libraries: Websites like ManualsLib, ManualsOnline, or Retrevo might have the manual you're looking for. You can search by the model number or the company name.

3. Device Support Forums: Sometimes, forums or community discussion boards dedicated to universal controls or home automation devices can be very helpful. Users often share manuals, tips, or even offer to email the manuals.

4. Contact Customer Support: If you're unable to find the manual online, consider reaching out to the manufacturer's customer support. They can provide you with a digital copy or guide you through the process of obtaining one.

6. Digital Alternatives and Modern Usage

While the physical manual is essential, consider these digital workflows:

1. QR Code scanning: Newer TH-MSUR-40 units have a QR code on the housing that links directly to the latest revision of the manual.
2. PDF Annotations: Download the PDF. Use a tool like Adobe Acrobat or Foxit to mark which parameters you changed (F12 = 3 etc.). This creates a maintenance log.
3. Quick Reference Card: Print only pages 3 and 4 (the parameter table and error codes). Laminate this card and tape it inside the electrical panel door.

Steps for Auto-Programming

1. Manually turn on the device you want to program (e.g., your Soundbar).
2. On the Articco remote, press and hold SETUP until the LED stays solid.
3. Press the DEVICE MODE button (e.g., AUDIO). The LED blinks once and stays solid.
4. Press and hold the POWER button (or PLAY for DVD) while pointing the remote at the device.
5. The remote will begin sending codes (roughly one every second). The LED will blink each time it sends a new code.
6. The moment your device turns off (or starts playing a DVD), IMMEDIATELY release the POWER/PLAY button.
7. The LED should flash 4 times and turn off, saving the code.
8. Test all buttons (Volume, Channel, Mute). If only Power works but Volume doesn't, repeat the process—the first code was a partial match; the next one will be the full match.